• Journal of Digital Convergence
• /
• v.11 no.8
• /
• pp.273-279
• /
• 2013

The purpose of the study was to present basic data to evaluation of the spatial resolution for exposure class(EC) in computed radiography(CR) by using the modulation transfer function(MTF). In this study, MTF was measured the edge method by using image plate(IP) of $100{\mu}mm$ pixels. A standard beam quality RQA5 based on an international electro-technical commission(IEC) standard was used to perform the X-ray imaging studies. Digital imaging began to set the sensitivity to EC 50, 100, 200, 300, 400, 600, 800, 1200 in X-ray irradiated to IP. The MTF 50% and 10% in the final images was analysis by using an authorized image analysis program the Origin 8.0 and the image J. As a results, the EC 200 was the best spatial resolution at MTF 50% ($1.979{\pm}0.114lp/mm$) and MTF 10% ($3.932{\pm}0.041$). Therefore, the EC 200 could be useful for the diagnosis of diseases that require high spatial resolution such as fractures.

• Journal of Korean Society of Steel Construction
• /
• v.25 no.6
• /
• pp.587-599
• /
• 2013

A simple but accurate analytical method to evaluate the fire resistance of unprotected concrete filled tubular (CFT) columns under standard fire condition is proposed based on the fire design framework of EC4. To this end, the accuracy of the current tabulation method for the temperature prediction proposed by Lawson et al. was first critically evaluated, and a new prediction equation for the temperature gradient across the CFT section was then proposed based on available test and finite element analysis results. Overall, the axial strength predicted by using the proposed equation under the general fire design framework of EC4 was more accurate than that based on existing methods and appeared reasonable for design purposes. The results of this study are directly usable for the more rational fire analysis and design of unprotected CFT columns.

• Journal of Korean Society of Steel Construction
• /
• v.18 no.5
• /
• pp.655-664
• /
• 2006

The purpose of thisanalytical study of an iTECH composite beam subjected to fire conditions is to determine the beam's fire resistance performance using its load ratio and fire protection as parameters. A composite structural system is expected to have a safer and more economical fire safety design than a mere collection of isolated members.heat transfer analysis was performed on the basis of the finite element program ANSYS 10.0 using an ISO834 standard fire, following the main guidelines proposed by EC1 Part 2.2 and EC4 Part 1.2. To validate the analytical simulation of the iTECH composite beam, comparison of the experimental tests was proposed.

• Environmental Analysis Health and Toxicology
• /
• v.24 no.1
• /
• pp.9-16
• /
• 2009

Effects of salinity and standard toxic metals on fertilization and embryo development rates were investigated in the sea urchin, Hemicentrotus pulcherrimus. Spawning was induced by injecting $1{\sim}2$ mL of 0.5 M KCl into the coelomic cavity. Males released white or cream-colored sperms and females released yellow or orange-colored eggs. The fertilization rate was below 30% when salinity was 20 psu and lower, but was almost above 90% when salinity was 25 psu and higher. The embryo development rate was below 60% when salinity was 25 psu and lower, but was above 80% when salinity was between 30 and 35 psu. The fertilization and embryo development rates in the control condition(not including Cu and Cd) were greater than 90%, but decreased a high negative correlation with the increasing of Cu(r=-0.80, r=-0.78) and Cd(r=-0.90, r=-0.82) concentrations, respectively. The fertilization and embryo development rates were significantly inhibited in the addition of Cu($EC_{50}$=17.30 ppb, $EC_{50}$=10.32 ppb) and Cd($EC_{50}$=364.57 ppb, $EC_{50}$=244.04 ppb), respectively. These results suggest that salinity concentrations for successful fertilization and normal embryogenesis of H. pulcherrimus are above 25 psu and 30 psu, respectively, and the biological assays of fertilization and embryo development rates using H. pulcherrimus are useful methods for the ecological toxicity test of marine pollution elements.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.407.1-407.1
• /
• 2016

Electrochromism is defined as a phenomenon which involves persistently repeated change of optical properties between bleached state and colored state by simultaneous injection of electrons and ions, sufficient to induce an electrochemical redox process. Due to this feature, considerable progress has been made in the synthesis of electrochromic (EC) materials, improvements of EC properties in EC devices such as light shutter, smart window and variable reflectance mirrors etc. Among the variable EC materials, solid-state inorganics in particular, metal oxide semiconducting materials such as nickel oxide (NiO) have been investigated extensively. The NiO that is an anodic EC material is of special interest because of high color contrast ratio, large dynamic range and low material cost. The high performance EC devices should present the use of standard industrial production techniques to produce films with high coloration efficiency, rapid switching speed and robust reversibility. Generally, the color contrast and the optical switching speed increase drastically if high surface area is used. The structure of porous thin film provides a specific surface area and can facilitate a very short response time of the reaction between the surface and ions. The large variety of methods has been used to prepare the porous NiO thin films such as sol-gel process, chemical bath deposition and sputtering. Few studies have been reported on NiO thin films made by using sol-gel method. However, compared with dry process, wet processes that have the questions of the durability and the vestige of bleached state color limit the thin films practical use, especially when prepared by sol-gel method. In this study, we synthesis the porous NiO thin films on the fluorine doped tin oxide (FTO) glass by using sputtering and anodizing method. Also we compared electrical and optical properties of NiO thin films prepared by sol gel. The porous structure is promised to be helpful to the properties enhancement of the EC devices.

• The KIPS Transactions:PartC
• /
• v.8C no.6
• /
• pp.855-864
• /
• 2001

With the increasing importance and complexity of EC (Electronic Commerce) across the Internet, the need and expectation for intelligent software agents to support both consumers and suppliers through the whole process of EC are growing rapidly. To realize the intelligent EC. a multiagent based EC system. which includes foundational technologies such as the establishment of standard product ontology the definition of message and negotiation protocol and brockering, is required. In this paper we propose an intelligent EC System named ICOMA(Intelligent electronic CO mmerce system based on Multi-Agent) as an open infrastructure of multiagent-based EC. Concretely we have proposed. designed and implemented an architecture of multiagent-based EC system including 6-types of agents message protocol for inter-agent negotiation, personalized produst retrieval and filtering., We have confirmed the effectiveness of the system through experiments.

• The Korean Journal of Malacology
• /
• v.22 no.2
• /
• pp.167-173
• /
• 2006

The embryos of marine bivalves have been commonly used in bioassays for quality assessments of marine environments. Although several standard protocols for the developmental bioassay of bivalves have been proposed, only a few trials for application of these protocols in environmental assessments or for the development of a new protocol with Korean species have been conducted. As such, there is a strong need to establish standard bioassay protocols with bivalves commonly found in Korean waters. To determine the sensitivity of Mytilus galloprovincialis to establish a standard bioassay, their fertilized eggs were exposed to six metals (Ag, Cd, Cr, Cu, Ni, and Zn). The order of biological impact was Ag > Cu > Ni > Zn > Cr > Cd and their lowest observed effective concentration were 5, 16.4, 25.4, 142, 187 and 1,500${\mu}g/l$, respectively. The proportion of normal larvae appeared to decrease linearly with the logarithm of each toxicant concentration within the tested range. The average values of median effective concentrations $(EC_{50})$ from the triplicate experiments for Ag, Cd, Cr, Cu, Ni, and Zn were 6.8, 1,797, 786, 16.6, 68.1, and 139.2${\mu}g/l$, respectively. There was a more than 100-fold difference in $EC_{50}$ values of Cu and Cd. The value of $EC_{50}$ or median lethal concentration of Cu was within the range observed for other bivalve developmental bioassays. The overall sensitivity of M. galloprovincialis in the present developmental bioassay was also similar to that of other marine organisms commonly used in aquatic bioassays (e.g. sea urchins, oysters). Hence, the bioassay using the embryo of M. galloprovincialis is considered to be a useful tool to monitor and evaluate the quality of marine aquatic environments.

• Horticultural Science & Technology
• /
• v.19 no.2
• /
• pp.179-185
• /
• 2001

Throughout the world, physical and chemical analyses of horticultural substrates are carried out in many different ways at the different laboratories. In Europe, standardization in properties and analytical methods of horticultural substrates has been a topic over the last decades. As a result, the CEN methods as European standard methods for the physical and chemical analyses were introduced and the final draft was reported in 1999 by CEN(Committee for European Standardization). Dry matter and moisture content are analyzed after drying samples at $103^{\circ}C$. Laboratory compacted bulk density is analyzed by determining the weight of sample compacted in the test cylinder with constant volume. Dry bulk density, particle density, total pore space, water volume, air volume and volume shrinkage are determined by saturating, draining and drying the sample using double rings and a sand suction table. pH and EC are analyzed by 1:5(sample:distilled water) extraction method on the basis of volume. Organic matter and ash content are determined after drying and combusting the samples. Now, CEN methods are being regarded almost as European standard methods. Further study needs to be carried out for universal applicability of the CEN methods to all the substrates.

• Weed & Turfgrass Science
• /
• v.5 no.2
• /
• pp.82-87
• /
• 2016

Herbicide options for weed control in sorghum is very limited, hence there is a need for exploring potential herbicides. Sorghum herbicide tolerance field trails were conducted at two locations, Yaechoun, Gyeongsangbuk-do, and Miryang, Gyeongsangnam-do, in 2013. Tolerance of sorghum was evaluated following the pre-emergence application of methabenzthiazuron 70% (WP), simazine 50% (WP), oxadiargyl 1.7% (EC), and dimethenamid-P 5% + pendimethalin 20% (EC) at the standard rate 157.5 g, 75 g, 5.1 g, and 75 g a.i. $10a^{-1}$, respectively. As well as double the standard rate. On a phytotoxicity scale of 0 to 9, methabenzthiazuron (WP) induced injury to sorghum up to level 1 at the standard rate and to 3 at double the rate, but did not significantly affect the yield any statistical difference from the untreated. Simazine (WP) induced phytotoxicity up to levels 2 and 4 at single and double rates, respectively. Simazine (WP) did not significantly affect yield: however, the values were numerically lower than those in the methabenzthiazuron (WP) treatment. Oxidiargyl (EC) and dimethenamid + pendimethalin (EC) induced no or slight phytotoxicity; however they failed to provide effective weed control at the standard rate (32 and 68% control, respectively). Out of the tested, methabenzthiazuron (WP) was found to have potential for use in sorghum whereas the other herbicides caused unacceptable levels of injury.

• Korean Journal of Food Science and Technology
• /
• v.14 no.1
• /
• pp.49-56
• /
• 1982

The effects of measurement conditions on the emulsifying capacity(EC) and emulsion stability(ES) of proteins were studied in order to develop laboratory standard methods for the evaluation of emulsifying properties. The EC of proteins decreased with the increments of protein concentration and mixing rate. It increased with the increasing oil addition rate up to 0.8 ml/sec, but did not change at $0.8{\sim}1.2\;ml/sec$. The addition of sodiumchloride enhanced EC of proteins, attaining to the highest EC at 0.3M NaCl for Pro-Fam and 0.1M NaCl for Na-caseinate. The ES of Pro-Fam was higher than that of caseinate. The ES was increased by the increments of protein concentration, oil addition volume, mixing rate and mixing time. The EC and ES showed a close relation to the NSI of proteins, reaching to the lowest values of EC and ES at the isoelectric regions of proteins. The laboratory methods for measurements of emulsifying properties of proteins were established. The emulsifying properties of a laboratory-made soybean protein isolate were compared to those of commercial products by using the methods.