• 생물환경조절학회지
• /
• 제7권2호
• /
• pp.123-129
• /
• 1998

본 실험은 엔디브 양액재배에 적합한 배양액을 조성하고. 새로 조성한 배양액(SCUE)의 효과를 검토하고자 수행하였다. 엔디브 재배에 적합한 배양액을 양수분 흡수율에 의해 조성한 결과 NO$_3$-N 15.0, NH$_4$-N 1.0 PO$_4$-P 3.0. K 10.0, Ca 5.0, Mg 3.5 me.$\ell$$^{-1}$가 적당하였다. 새로 조성한 서울시립대 엔디브액 (SCUE)과 유럽의 엔디브액간의 재배실험 결과, 배양액간의 생육 및 수량은 차이가 없었지만, pH와 EC의 변화폭은 새로 조성한 양액에서 적었다.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2003년도 학술대회지
• /
• pp.573-576
• /
• 2003

최근 들어 컴퓨터의 보급과 인터넷 기술의 발전으로 건설사업을 수행하면서 발생하는 서식문서, 보고서, 계산서, 시방서 등 각종 문서를 컴퓨터를 사용하여 작성하고 작성된 전자문서는 인터넷을 통해 활발히 유통하고 있는 실정이다. 기존 전자문서는 다양한 포맷으로 작성되어 포맷간의 호환성의 문제 결여와 문서 내용이 의미하는 것을 사람과 컴퓨터가 함께 인식할 수 있는 건설관련 기술문서를 단순하게 전자적인 형태로 작성하기 않고 특정 하드웨어나 소프트웨어에서 구애를 받지 않으면서 표준화된 정보체계에 따라 전자문서화하고 기술문서의 활용성 제고를 위한 요구가 점차 강조되고 있다. 본 연구는 이러한 요구를 충족시키기 위해 건설CALS/EC의 구조적 언어인 XML 기술을 사용하여 기술문서를 전자문서화하기 위한 개발 절차와 방법을 마련하였다.

• Structural Engineering and Mechanics
• /
• 제49권1호
• /
• pp.65-80
• /
• 2014

This paper reports on the development of a minimum cost design model and its application for obtaining economic designs for reinforced High Strength Concrete (HSC) T-sections in bending under ultimate limit state conditions. Cost objective functions, behavior constraint including material nonlinearities of steel and HSC, conditions on strain compatibility in steel and concrete and geometric design variable constraints are derived and implemented within the Conjugate Gradient optimization algorithm. Particular attention is paid to problem formulation, solution behavior and economic considerations. A typical example problem is considered to illustrate the applicability of the minimum cost design model and solution methodology. Results are confronted to design solutions derived from conventional design office methods to evaluate the performance of the cost model and its sensitivity to a wide range of unit cost ratios of construction materials and various classes of HSC described in Eurocode2. It is shown, among others that optimal solutions achieved using the present approach can lead to substantial savings in the amount of construction materials to be used. In addition, the proposed approach is practically simple, reliable and computationally effective compared to standard design procedures used in current engineering practice.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2003년도 학술발표논문집
• /
• pp.303-306
• /
• 2003

This survey was carried out to investigate the chemical characteristics of ground water for livestock purpose and to estimate the influence of ground water quality by livestock farming. Water samples were collected three times in 2000, and analyzed for theirs chemical compositions using Korean Standard Methods for Water Quality. The EC of ground water was from 0.214 to 0.474 dS/m. $NO_3-N$ contamination range was from 3.56 to 11.81. The $SO_4{^{2-}}$ was $4.31{\sim}69.37mg/L$ and CI was $12.75{\sim}41.46mg/L$. The data of ground water quality indicated suitable quality for livestock. Also, the concentration of heavy metals in the sample could not make damage to the animals. The $NO_3-N$ concentration of the water by times are as follows: October (8.19 mg/L) > July (7.65 mg/L) > April (4.04 mg/L) with no significant differences during the livestock farming period. The average quality of groundwater for livestock is good for its purpose, and it was showed there was few influence by livestock farming.

• 한국전자거래학회:학술대회논문집
• /
• 한국전자거래학회 1999년도 학술대회지 vol.2
• /
• pp.575-586
• /
• 1999

The advent of the Internet and the enormous increase in volume of electronically stored information (SGML, Image, Sound, etc.) has led to substantial work on IR(Information Retrieval). To service on the WWW, construction and retrieval technology of SGML, which is the fundamental standard data format for CALS/EC, is needed specially. Due to such a change, it becomes essential to change the existing paradigm of conventional information retrieval systems and to adopt new Internet service system with search engine, SGML browser and advanced Internet technology on WWW. KIPRIS(Korea Industrial Property Rights Information Service), which is the specialized and integrated Internet service systems in the field of industrial property rights information service, is trying to be a guide for our country to establish its technological competitiveness with providing the online service of high quality. The objective of the paper identifies features and technologies of KIPRIS IR(Information Retrieval) system based on WWW as follows. First, it describes the development background and process of KIPRIS. Second, it presents a fundamental technology that consists of IR(Information Retrieval) concept, BRS(Bibliographical Retrieval System) search engine, SGML implementation technologies and the Internet/WWW technologies. Third, it provides information about system configuration, architecture, and the features and characteristics of KIPRIS. Finally, the implemented KIPRIS system is introduced.

• International Journal of Concrete Structures and Materials
• /
• 제1권1호
• /
• pp.63-73
• /
• 2007

Optimum multi-layered feed-forward neural network (NN) models using a resilient back-propagation algorithm and early stopping technique are built to predict the shear capacity of reinforced concrete deep and slender beams. The input layer neurons represent geometrical and material properties of reinforced concrete beams and the output layer produces the beam shear capacity. Training, validation and testing of the developed neural network have been achieved using 50%, 25%, and 25%, respectively, of a comprehensive database compiled from 631 deep and 549 slender beam specimens. The predictions obtained from the developed neural network models are in much better agreement with test results than those determined from shear provisions of different codes, such as KBCS, ACI 318-05, and EC2. The mean and standard deviation of the ratio between predicted using the neural network models and measured shear capacities are 1.02 and 0.18, respectively, for deep beams, and 1.04 and 0.17, respectively, for slender beams. In addition, the influence of different parameters on the shear capacity of reinforced concrete beams predicted by the developed neural network shows consistent agreement with those experimentally observed.

• Transactions on Electrical and Electronic Materials
• /
• 제1권1호
• /
• pp.22-25
• /
• 2000

Polycrystalline SBTN layered ferroelectric thin film with various Nb mole ratios were prepared by sol-gel method Pt/ $SiO_2$/Si (100) substrates. The films were annealed at different temperature and characterized in terms of phase and microstructure. The films were crystallized with a high (105) diffraction intensity and had rodike structure, SBTN films fired at 800$^{circ}C$ revealed standard hysteresis loops with no fatigue for up to 10$^{10}$ cycles. At an applied voltage of 5V the dielectric constant($varepsilon$) , dissipation factor (tan $delta$), remanent polarization(ZPr) and coercive field(Ec) of typical S $r_{0.8}$B $i_{2.3}$(T $a_{1-x}$ N $b_{x}$) $O_{9+}$$alpha$/ thin film(x=0.1) prepared on Pt/ $SiO_2$/Si (100) were about 277.7, 0.042, 3.74$mu$C/$textrm{cm}^2$, and 24.8kv/cm respectively.ly.y. respectively.ly.y.y..

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2000년도 추계학술발표논문집 (상)
• /
• pp.227-230
• /
• 2000

건설 도면정보의 공유 및 교환은 건설 CALS/EC(Continuous Acquisition & Lifecycle Support /Electronic commerce) 환경의 필수적인 요소이다. 그러나 CAD 시스템의 버전변화와 별도의 한글처리로 인하여 도면정보의 관리 렌 활용에 많은 문제점이 발생하고, 상이한 CAD 시스템간의 파일 교환이 제대로 이루어지지 못하는 등 도면정보 교환을 위한 정보모델의 구축이 절실히 요구되고 있다. 이러한 환경에서 STEP(Standard for the Exchange of Product model data)은 건설 도면정보의 교환 및 공유를 위한 정보모델을 구축함에 있어서 그 활용 가능성이 높다. 본 연구에서는 STEP을 이용하여 건설분야에서 활용 가능한 2차원 도면정보 모델을 개발하고자 한다. 이를 위하여 STEP내의 AP 202를 기반으로, AP 214와 독일의 2차원 도면정보 표준화 프로젝트인 STEP-CDS를 참조하도록 한다. 그리고 실제 개발된 도면정보모델이 기존 CAD 도면 데이터를 제대로 표현할 수 있는지 검증하기 위하여 상용 CAD시스템인 AutoCAD Rl4의 DXF 데이터를 개발된 정보모델로 변환하여 그 결과를 검토하고자 한다. 세부적으로는 DXF 데이터의 도면정보모델로의 변환을 위하여 DXF 구조의 STEP 스키마를 정의한다. 이때 이 스키마와 도면정보모델의 스키마간의 매핑을 위하여 STEP내의 EXPRESS-X를 이용하기로 한다. 또한 도면정보 모델의 데이터의 뷰잉과 브라우징을 위하여 도면정보 뷰어를 개발한다.

• 한국환경과학회지
• /
• 제24권8호
• /
• pp.1075-1084
• /
• 2015

This study was conducted to investigated the changes in the nutrient components ($NO_3{^-}-N$, $NH_4{^+}-N$, $PO_4{^{3-}}P$, $K^+$, $Ca^{2+}$, and $Mg^{2+}$) and environmental parameters (electrical conductivity, total dissolved solids and pH) on the leaf lettuce (Lactuca sativa L.) grown with hydroponics. Recirculating hydroponic cultivation system was consisted of planting port, LED lamp, water tank, and circulating pump for hydroponic. Nutrient solution was used in the standard solution for Japan vegetables experimental station and commercial hydroponic. The result showed that electrical conductivity (EC), total dissolved solids (TDS) and pH, depending on the growth of lettuce decreased continuously. With the growth of the lettuce, nitrate nitrogen, ammonia nitrogen, phosphate phosphorus were required for periodic replacement. The number of pH compensation due to the growth of lettuce are the most high. The concentration of $Ca^{2+}$ and $Mg^{2+}$ during the lettuce growth showed no significant change. However, $K^+$ concentration increased due to the replacement with nitrogen and phosphorus. Electric conductivity and total dissolved solids with total nutrient concentration showed the linear relationship and the correlation coefficient $R^2$ were 0.8601 and the 0.827, respectively.

• 대한화학회지
• /
• 제63권4호
• /
• pp.260-265
• /
• 2019

Alcohol dehydrogenase (ADH) (EC 1.1.1.1) was selected as the enzyme which will be immobilized on ultrafiltration membrane by fouling with different transmembrane pressure of 1, 2 and 3 bars. ADH will catalyze formaldehyde (CHOH) to methanol ($CH_3OH$) and simultaneously oxidized nicotinamide adenine dinucleotide (NADH) to $NAD^+$. The concentration of enzyme and pH are fixed at 0.1 mg/ml and pH 7.0 respectively. The objective of the study focuses on the effect of different transmembrane pressure (TMP) on enzyme immobilization in term of permeate flux, observed rejection, enzyme loading and fouling mechanism. The results showed that at 1 bar holds the lowest enzyme loading which is 1.085 mg while 2 bar holds the highest enzyme loading which is 1.357 mg out of 3.0 mg as the initial enzyme feed. The permeate flux for each TMP decreased with increasing cumulative permeate volume. The observed rejection is linearly correlated with the TMP where increase in TMP will cause a higher observed rejection. Hermia model predicted that at irreversible fouling with standard blocking dominates at TMP of 3 bar, while cake layer and intermediate blocking dominates at 1 and 2 bar respectively.