• Journal of the Korean institute of surface engineering
• /
• v.36 no.6
• /
• pp.423-429
• /
• 2003

It has been investigated corrosion resistance and crystal structure of Zn-Cr coatings fabricated by electroplating method and electron-beam physical vapor deposition method(EB-P VD). The electroplated Zn-Cr alloy consists mainly of η'-Zn phase for the lower Cr content than 7.9 wt% Cr and ${\gamma}$'-ZnCr phase for the higher Cr content. In the Zn-Cr alloy fabricated by EB-PVD the ${\gamma}$'-ZnCr phase appeared clearly at 3 wt% Cr and it became the sole phase at 50 wt%Cr. The amount of η'-Zn phase decreased obviously with increasing Cr content when it exceeded 15 wt% Cr. The electrochemical measurement of the electroplated Zn-Cr film has shown corrosion potential of about -1000 mV. The current density of active region and the amount of dissolved Zn and Cr decreased significantly with increasing Cr content. The electrochemical characteristics of Zn-Cr alloy fabricated by EB-PVD have shown that the alloy of 50 wt% Cr had the highest corrosion potential(-500 mV) and the lowest critical passive current density than that of the electroplated.

• Educational Technology International
• /
• v.16 no.2
• /
• pp.183-200
• /
• 2015

This study investigated the effect of learning achievements and cognitive load according to different types of presenting learning materials and epistemological beliefs (EB). Learning achievements in this study were composed by retention and transfer of ill-structured problem. A total of 80 college students participated in the study. Prior to the learning, students were guided to fill out a questionnaire regarding epistemological beliefs and a prior knowledge test. The students of each group studied with a different type of reading material: full text (FT), full text including key questions (KeyFT) and full text including a concept map (CmFT). After a session of study was finished, they were asked to complete the posttest: retention and transfer. The results showed that there was a significant difference in transfer achievements. CmFT outperformed higher scores than the other types. There was no significant difference in retention among the groups. It is strongly believed that the types of presenting learning materials may have affected the understanding of ill-structured problem solving skills. Students with sophisticated EB showed higher achievements on retention and transfer than naive-EB and mixed-EB. Even though the data showed decrease of the cognitive load on the type of materials and EB, there were no significant differences on the cognitive load. We should consider a positive effect of types of presenting learning materials and EB enhancing capabilities of solving ill-structured problems in real life.

• Journal of Korean Society of Transportation
• /
• v.27 no.3
• /
• pp.81-90
• /
• 2009

The safety management of a road network comprises four basic inter-related components：identification of sites(black spot) requiring safety investigation, diagnosis of safety problems, selection of feasible treatments for potential treatment candidates, and prioritization of treatments given limited budgets(Persaud, 2001). Identification process of selecting black spot is very important for efficient investigation of sites. In this study, the accident prediction model for EB method was developed by using accident data and geometric conditions of black spots selected from four-leg signalized intersections in In-cheon City for three years (2004-2006). In addition, by comparing the rank nomination technique using EB method to that by using accident counts, we managed to show the problems which the existing method have and the necessity for developing rational prediction model. As a result, in terms of total number of accidents, both the counts predicted by existing non-linear regression model and that by EB method have high good of fitness, but EB method, considering both the accident counts by sites and total number of accident, has better good of fitness than non-linear poison model. According to the result of the comparison of ranks nominated for treatment between two methods, the rank for treatment of almost sites does not change but SeoHae intersection and a few other intersections have significant changes in their rank. This shows that, with the technique proposed in the study, the RTM problem caused by using real accident counts can be overcome.

• Korean Journal of Veterinary Research
• /
• v.34 no.2
• /
• pp.307-313
• /
• 1994

We have previously shown that crude water extract of Euonymus alatus (EA) had strong prophylactic effect against chemically induced-and tumor cell implanted-cancer, and that the mechanisms responsible for its antitumor effects were due to nonspecific enhancement of the NK cell activities and the cell mediated immunity. However, it was unknown that any components of crude extract did work so, since it consisted of several components. In this paper, we fractionated the crude watar EA-extract into several fraction such as hexane-, ethylether-, ethyl acetate-, n-butanol- and water soluble-fraction, and screened the immune regulating activities of each fraction by the evaluation of lymphokine production and activated lymphocyte proliferation. As a result of the component fraction of EA-extract, it was found that n-butanol fraction was a potent immunostimulator, and the remained water soluble fraction also contained some stimulator, But, other fraction did not showed any remarkable effect. It is therefore suggested that EA-glycosides in n-butanol fraction may be new one of the potent biological response modifiers. The present study was also undertaken in an efforts to investigate the effects of elm-bark(EB, Ulmus clavidiana var japonica), which has been used for curing ulcer and inflammation as a folk medicine without any kind of experimental evidence to support this, on the cellular- and humoral-immune responses, lymphocyte function and NK cell activities in mice. Regardless of time and duration of EB-treatment, Arthus reaction and antibody response to SRBC were not modified by EB, but delayed hypersensitivity to SRBC was significantly enhanced only when EB was treated prior to SRBC-sensitization. EB slightly inhibited the proliferation responses of splenocytes to PHA-stimulation, but it significantly augmented the responses of these cells to S aureus Cowan 1 and Con A-activation, and these effects were manifested only when EB was added at culture initiation. EB did not influence Ig secretion of spleen cells but it significantly augmented the Con A-induced 1L 2 and MIF production of splenocytes. NK cell activities of splenocytes were markedly riled when effector cells were pretreated with EB and this augmentation was dine to the increase of binding affinity of effector cells to target cells and the target cell lytic activities of effector cells. These results led to the conclusion that EB triggers increase of cellular immune responses, such as delayed hypersensitivitiy, lymphokine production and NK cell activities. Also these results suggested that EB contains potent immune stimulants, which may provide the rational basis for their therapeutic use as one of the new biological response modifiers.

• Journal of the Korea Concrete Institute
• /
• v.21 no.3
• /
• pp.337-345
• /
• 2009

The purpose of this study is to investigate the shear strengthening effectiveness of the beams strengthened with near surface mounted (NSM) and external bonded (EB) CFRP strips. A total of nine concrete beams were made and tested. From this study, it was found that the shear stiffness and strength of the beams strengthened with NSM and EB strips were significantly improved compared to the control beam. Failure of the beam strengthened with NSM and EB strips was initiated by shear cracks, propagated diagonally to the adjacent epoxy grooves without crossing the epoxy and finally sudden diagonal crack connecting the point of application of load and flexural crack was occurred. For the beam strengthened combined with NSM and EB CFRP strips, the tensile strains in the NSM CFRP strips were observed in the range of 0.35% to 0.45% and strains with EB strips were measured about 0.3%.

• Proceedings of the Optical Society of Korea Conference
• /
• 2009.02a
• /
• pp.133-134
• /
• 2009

Cold temperature development (CTD) of electron beam (EB) patterned resists and subsequent dry etching were investigated for fabrication of nano-patterned Niobium (Nb). Bulky Nb fims on GaAs substrates were deposited with EB evaporation. Line patterns on Nb cathode were fabricated by EB patterning and reactive ion etching (RIE). Size deviations of nano-sized line patterns from CAD designed patterns are dependent on the EB total exposure, but it can be improved by CTD of EB-exposed resist. Line patterns of 10 to 300 nm widths of EB-exposed resist patterns were drawn under various exposure conditions of $0.2{\mu}s$/dot (total 240,000 dot) with a constant current (50 pA). Compared with room temperature development (RTD), the CTD improves pattern resolution due to the suppression of backscattering effect. RIE with $CF_4$ was performed for formation of several nano-sized line patterns on Nb. Each EB-resist patterned samples with RTDs and CTDs were etched with two different $CF_4$ gas pressures of 5 Pa. Nb etching rate increases while GaAs (or ZEP) etching rate decreases as the chamber pressure increases. This different dependent of the etching rate on the $CF_4$ pressure between Nb and GaAs (or ZEP) has a significant meaning because selective etching of nano-sized Nb line patterns is possible without etching of the underlying active layer.

• Proceedings of the KSAR Conference
• /
• 2003.06a
• /
• pp.76-76
• /
• 2003

Pluripotent embryonic stem cells can differentiate into beating cardiomyocytes with proper culture conditions and stimulants via embryo-like aggregates. We describe here the use of mouse embryonic stem (mES03) cells as a reproducible differentiation system for cardiomyocyte. mES03 cells growing in colonies were dissociated and allowed to re-aggregated in suspension [embryoid body (EB) formation〕. To induce cardiomyocytic differentiation, cells were exposed to 0.75% dimethyl sulfoxide (DMSO) during EB formation for 4 days and then another 4 days without DMSO (4+/4-). Thus treated EB was plated onto gelatin-coated dishes for differentiation. Spontaneously contracting colonies which appeared in approximately 4~5 days upon differentiation were mechanically dissected, enzymatically dispersed, plated onto coverslips, and then incubated for another 48~72 hrs. By RT-PCR, robust expression of cardiac myosin heavy chain $\alpha$, cardiac muscle heavy polypeptide 7 $\beta$($\beta$-MHC), cardiac transcription factor GATA4, and skeletal muscle-specific $\alpha$$_1$-subunit of the L-type calcium channel ($\alpha$$_1$CaC $h_{sm}$ ) were detected as early as 8 days after EB formation, but message of cardiac muscle-specific $\alpha$$_1$-subunit of the L-type calcium channel ($\alpha$$_1$CaCh) were reveled at a low level. In contrast, expression of myosin light chain (MLC-2V) and atrial natriuretic factor (ANF) were not detected during EB formation for 8 days. However, a strong expression of the atrial-specific ANF gene was expressed from day 8 onward, which were remained constant in EB. (cardiac specialization and terminal differentiation stage). Electrophysiological examination of spontaneously contracting cells showed ventricle-like action potential 17 days after the EB formation. This study indicates that mES03 cell-derived cardiomyocytes via 4+/4- protocol displayed biochemical and electrophysiological properties of subpopulation of cardiomyocytes.

• Journal of the Korean Ceramic Society
• /
• v.42 no.2 s.273
• /
• pp.117-122
• /
• 2005

Electron Beam Physical Vapor Deposition (EB-PVD) is a typical technology for thermal barrier coating with Yttria Stabilized Zirconia (YSZ) on aero gas turbine engine. In this study EB-PVD method was used to fabricate dense YSZ film on NiO-YSZ as a electrolyte of Solid Oxide Fuel Cell (SOFC). Dense YSZ films of -10 $\mu$m thickness showed nano surface structure depending on deposition temperature. Electrical conductivities of YSZ film and electric power density of the single cell were evaluated after screen- printing $LaSrCoO_3$ as a cathode.

• Laser Solutions
• /
• v.11 no.2
• /
• pp.15-19
• /
• 2008

Electron beam (EB) weldability of pure grade Nb sheet was studied. One of Nb sheets was as-annealed and the other was cold rolled. Microstructures, Vickers hardness, and transverse weld tensile test were carried out for the base metal, the heat affected zone (HAZ) and weld metal. In the case of the EB welds made using the annealed Nb sheeet, fine equiaxed grains and coarse grains were dominant at the base metal and the HAZ, respectively, and columnar grains were observed at the weld metal. For the EB welds made using the cold rolled Nb sheet, elongated grains in the rolling direction at the base metal, and the microstructures of the weld metal and the HAZ are similar to those of the EB welds made using the annealed Nb sheet, respectively. For both annealed and cold rolled Nb sheet, the width of the HAZs are unusually wide in spite of using high density heat source, i.e. electron beam, and the grain sizes of both HAZs are similar. When tensile test was carried out using the transverse weld specimens, the failure occurred at the HAZ for both EB welds made using Nb sheets annealed and cold rolled, respectively and the tensile strengths of both specimens were 161MPa. Vickers hardness of EB welds made using annealed Nb was 56-57 Hv at both base metal and weld metal, 52-53 Hv at the HAZ. On the other hand, Vickers hardness of EB welds made using cold rolled Nb was 97-99 Hv at the base metal, but the hardness values of weld metal were similar to those obtained at the weld metal of annealed Nb.

• Journal of Applied Biological Chemistry
• /
• v.61 no.1
• /
• pp.101-108
• /
• 2018

This study was conducted to establish optimized ${\beta}-glucan$ extraction method through enzymatic hydrolysis from Phellinus baumii and investigate ${\beta}-glucan$ contents and physicochemical properties. The optimal condition was obtained with the enzyme concentration of 0.66% (v/v), reaction time of 6.08 h ($R^2=0.9245$) and the ${\beta}-glucan$ contents from the Phellinus baumii extracts under the optimized condition was 1.9594 g/100 g. ${\beta}-Glucan$ yield (0.76-16.40%) of enzyme beta-glucan extract (EBE) was three fold higher than that of non-enzyme beta-glucan extract (NEBE). ${\beta}-Glucan$ purity (11.15-59.05%) of non-enzyme beta-glucan (NEB) and that of enzyme beta-glucan (EB) were higher than that of NEBE and that of EBE. ${\beta}-Glucan$ purity of EB (59.05%) and ${\beta}-glucan$ contents of EB (3.38 g/100 g) showed higher than those of others. Total sugar contents (0.61-1.17 mg/mL) showed that NEB and EB were higher than that of NEBE and EBE, EB had the highest total sugar content as 1.17 mg/mL, respectively. Protein contents (0.44-11.73 mg/mL) of NEBE and that of EBE were higher than that of NEB, that of EB. In FT-IR spectrum, the band at $890cm^{-1}$ of microcapsule was attributed to a ${\beta}-1,3-glucan$. The toxicities of ${\beta}-glucan$ from Phellinus baumii in both melanoma cell lines was determined using 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazoli um bromide assay and ${\beta}-glucan$ from Phellinus baumii has no toxicity until $30{\mu}g/mL$. The effects of ${\beta}-glucan$ from Phellinus baumii on inhibition of cancer cell proliferation were detected by using a wound healing assay. The effect of NEB and EB were higher than NEBE and EBE, especially $30{\mu}g/mL$ of EB had the highest in both melanoma cell lines.