• Journal of KIISE:Computer Systems and Theory
• /
• v.26 no.6
• /
• pp.644-661
• /
• 1999

인터넷에서 통합서비스를 제공하기 위해서는 종단간 다양한 QoS를 지원해야 하는데 이를 위해서는 인터넷뿐 아니라 종단 사용자와 인터넷을 연결하는 랜에서의 QoS 지원이 필요하다. 이에, IETF는 특정 링크 계층으로 구성되는 서브넷에서 QoS 지원을 위한 기본 골격을 제안하였다. 그런데 , 매체 접근방식에 따라 서브넷이 제공할 수 있는 서비스의 정도가 크게 달라지기 때문에 실제로 IS802 모델을 특정서브넷에 구현하기 위해서는 이에 대한 고려가 필요하다. 본 논문에서는 통합서비스를 지원하기 위한 기반이 되는 서브넷 차원에서의 우선순위 지원을 목표로 IS802 모델을 전통적인 이더넷과 토큰링에 적용하여 보았다. 먼저, IS802 모델의 대역폭관리자를 적용한 이더넷 IS모델과 토큰링_IS 모델의 구현을 제안하고 특별히, 이더넷의 경우 매체 접근 방식의 특성상 IS802 모델의 적용만으로는 서브넷차원에서의 우선순위에 따른 전송을 지원할 수 없기 때문에 이를 보완하기 위한 페이즈 모델을 추가로 제안하였다. 시뮬레이션을 통해 기존의 전통적인 이더넷과 토큰링 및 새롭게 표준화된 IS802 모델을 적용한 이더넷 _IS와 토큰링 _IS, 그리고 페이즈 모델간의 성능을 비교하였다. 시뮬레이션결과 토큰링의 경우 단순한 입장 제어에 의해서도 QoS 지원 정도가 크게 향상될수 있음을 볼 수 있었다. 또한 , 페이즈 모델의 경우 이더넷의 매체 접근 방식을 상당히 보완함으로써 QoS 지원 정도가 크게 향상될 수 있음을 볼 수 있었다. 또한, 페이즈 모델의 경우 이더넷의 매체 접근 방식을 상당히 보완함으로써 QoS 지원을 요구하는 플로우에대해서는 전통적인 이더넷이나 이더넷_IS 비해 훨씬 안정적인 서브넷 차원의 우선순위지원 서비스를 제공할 수 있음을 확인할 수 있었다.제공하는 멀티미디어 동기화 편집기와 변환기 및 상영기를 ScriptX를 이용하여 Windows95 상에 구현하였다.기 위한 간단한 例를 들어 봄으로써 이 글을 쓰는 동기으 일면을 대신하고자 한다.置함으로 이것을 Multi-Drop(points) system으로 swiching System을 利用 Mini-Network을 構成할 수도 있다.크 구성 관리 서버 시스템 개발에 대한 비용을 줄일 수 있다. 기대된다.e 함량이 대체로 높게 나타났다. 점미가 수가용성분에서 goucose대비 용출함량이 고르게 나타나는 경향을 보였고 흑미는 알칼리가용분에서 glucose가 상당량(0.68%) 포함되고 있음을 보여주었고 arabinose(0.68%), xylose(0.05%)도 다른 종류에 비해서 다량 함유한 것으로 나타났다. 흑미는 총식이섬유 함량이 높고 pectic substances, hemicellulose, uronic acid 함량이 높아서 콜레스테롤 저하 등의 효과가 기대되며 고섬유식품으로서 조리 특성 연구가 필요한 것으로 사료된다.리하였다. 얻어진 소견(所見)은 다음과 같았다. 1. 모년령(母年齡), 임신회수(姙娠回數), 임신기간(姙娠其間), 출산시체중등(出産時體重等)의 제요인(諸要因)은 주산기사망(周産基死亡)에 대(對)하여 통계적(統計的)으로 유의(有意)한 영향을 미치고 있어 $25{\sim}29$세(歲)의 연령군에서, 2번째 임신과 2번째의 출산에서 그리고 만삭의 임신 기간에, 출산시체중(出産時體重) $3.50{\sim}3.99kg$사이의 아이에서 그 주산기사망률(周産基死亡率)이 각각 가장 낮았다. 2. 사산(死産)과 초생아사망(初生兒死亡)을 구분(區分)하여 고려해 볼때 사산(死産)은 모성(母性)의 임신력(姙娠歷)

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.1
• /
• pp.100-113
• /
• 2018

The Proximity Service, which is one of the most popular network capacity improvement methods, uses the frequency reuse in order to increase the frequency efficiency. As a result, inter-cell interference between cellular and proximity service users occurs at a cell edge. In this paper, we proposed a mitigation scheme for inter-cell interference, where we suggested a new function of and eNB with ProSe function exchanging information about ProSe parameters and ProSe user equipment with neighboring cells via the X2 interface. As the first step, the resource which did not cause the inter-cell interference problem were pre-allocated through the frequency sensing in the ProSe direct discovery. As the next step, the inter-cell interference problem was solved by reallocating appropriate resources based on the ProSe application code, the ProSe application QoS, the ProSe application ID and validity timer in ProSe direct communication.

• Journal of Advanced Navigation Technology
• /
• v.11 no.4
• /
• pp.401-407
• /
• 2007

This paper proposes the ethernet-based in-vehicle networking method for "body" and "multimedia" domains. The ethernet-based in-vehicle networking method should modify the topology and the layer 2 for traffic shaping. In this paper, we simulate the two ring networking systems, the Media Oriented Systems Transport (MOST) and the proposed system with the shaping by the network simulator 2 and evaluate each performance. In addition, we demonstrate the proposed networking system to exchange two kinds of traffic, i.e., QoS data and best-effort data, on the ring network constituting of three nodes. Finally this paper expects to substitute the ethernet-based in-vehicle network for the MOST in advance.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.1
• /
• pp.1-9
• /
• 2010

In this paper we propose a scheduling algorithm for supporting Quality of Service(QoS) in IEEE 802.11e HCCA referred to as ASR-DRR and ASD-DRR, which aims at providing improved performance for the support of multimedia traffic. Although We identify the problem of the current IEEE 802.11e HCCA (Hybrid Coordination Function Controlled Channel Access) scheduler and its numerous variations, that the queue information cannot be notified to the Hybrid Coordinator (HC) timely, therefore the uplink delay lengthens unnecessarily. We suggests a simple solution and a couple of implementation practices, namely the Adaptive Scheduler with RTS/CTS (ASR) and Adaptive Scheduler with Data/Ack (ASD). They are both further elaborated to emulate the Deficit Round Robin (DRR) scheduler. They are also compared with existing exemplary schedulers through simulation, and shown to perform well.

• Journal of Advanced Navigation Technology
• /
• v.14 no.1
• /
• pp.49-56
• /
• 2010

Severe energy constraints and the low power consumption require the significance of the energy efficient error control mechanisms in wireless sensor network (WSN). In this paper, an automatic repeat request (ARQ) methodology for the analysis of error control schemes in WSN is presented such that the effects of packet length, the modulation scheme and the interference effect of the wireless channel are investigated. Moreover, an analyis of ARQ error control is provided by considering two major architectures for wireless sensor network, i.e., Mica2 and MicaZ sensor nodes. And the throughput performance of WSN with asynchronous FSK signal and DSSS-OQPSK signal with selective repeat ARQ scheme are analyzed in multiple interference environment, and the probability of receiving a correct bit and packet from target node to sink node is evaluated as a function of the channel parameter, the number of wireless sensor node, and the spreading factor.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.2 no.2
• /
• pp.63-81
• /
• 2008

WiMAX has been introduced as a competitive alternative for metropolitan broadband wireless access technologies. It is connection oriented and it can provide very high data rates, large service coverage, and flexible quality of services (QoS). Due to the large number of connections and flexible QoS supported by WiMAX, the uplink access in WiMAX networks is very challenging since the medium access control (MAC) protocol must efficiently manage the bandwidth and related channel allocations. In this paper, we propose and investigate a cost-effective WiMAX bandwidth management scheme, named the WiMAX partial sharing scheme (WPSS), in order to provide good QoS while achieving better bandwidth utilization and network throughput. The proposed bandwidth management scheme is compared with a simple but inefficient scheme, named the WiMAX complete sharing scheme (WCPS). A maximum entropy (ME) based analytical model (MEAM) is proposed for the performance evaluation of the two bandwidth management schemes. The reason for using MEAM for the performance evaluation is that MEAM can efficiently model a large-scale system in which the number of stations or connections is generally very high, while the traditional simulation and analytical (e.g., Markov models) approaches cannot perform well due to the high computation complexity. We model the bandwidth management scheme as a queuing network model (QNM) that consists of interacting multiclass queues for different service classes. Closed form expressions for the state and blocking probability distributions are derived for those schemes. Simulation results verify the MEAM numerical results and show that WPSS can significantly improve the network’s performance compared to WCPS.

• Journal of KIISE:Computing Practices and Letters
• /
• v.14 no.2
• /
• pp.191-195
• /
• 2008

This paper proposes a technique for improving IEEE 802.11e EDCA's performance by dynamically adjusting each class's contention window size based on each class's traffic amount. For providing differentiated service differently from 802.11, 802.11e EDCA maintains four classes each of which specifies different static minimum and maximum contention window sizes. Since the initial window sites significantly affect the 802.11e performance, several window adjustment schemes have been proposed. One of the schemes known as CWminAS (CWmin Adaptation Scheme) dynamically and synchronously determines the four windows' site based on the periodically measured collision rate. This method, however, can lower the send probability of high priority classes since it can't differentiate their collisions from those of low priority classes, leading to the channel underutilization. For solving this problem, we propose ACATICT(Adaptive Contention-window Adjustment Technique based on Individual Class Traffic) algorithm which adapts each class window size based on each individual collision rate rather than one average collision rate. Our simulation experiments show that ACATICT achieves better utilization by around 10% at maximum.

• The KIPS Transactions:PartC
• /
• v.12C no.6 s.102
• /
• pp.799-808
• /
• 2005

This paper proposes low latency handover procedure for seamless connectivity and QoS support between wired (e.g. Ethernet) and wireless (e.g. WLAN, WiBro(802.16-compatible), CDMA) networks by the mobile-assisted and server-initiated handover strategy. It is assumed that the server decides the best target network considering network status and user preferences. In this algorithm a mobile terminal associates with the wireless link decided at the server In advance and receives CoA as well. When handover occurs without the prediction in wired networks, the server performs fast binding update using physical handover trigger through the MIH(media independent handover) function. As a result, a mobile terminal does not need to perform L2 and L3 handover during handover so that this procedure decreases handover latency and loss.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.12
• /
• pp.45-52
• /
• 2005

This paper proposes low latency handover procedure for seamless connectivity and QoS support between wired (e.g. Ethernet) and wireless (e.g. WLAN, WiBro(802.16-compatible), CDMA) networks by the mobile-assisted and server-initiated handover strategy. It is assumed that the server decides the best target network considering network status and user preferences. In this procedure, a mobile terminal associates with the wireless link decided at the server in advance and receives CoA as well. When handover occurs without the prediction in wired networks, the server performs fast binding update using physical handover trigger through the MIH (media independent handover) function. As a result, a mobile terminal does not need to perform L2 and L3 handover during handover so that this procedure decreases handover latency and loss.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.2
• /
• pp.618-633
• /
• 2014

Relay technology is becoming more important for mobile communications and wireless internet of things (IoT) networking because of the extended access network coverage range and reliable quality of service (QoS) it can provide at low power consumption levels. Existing mobile multihop relay (MMR) technology uses fixed-point stationary relay stations (RSs) and a divided time-frame (or frequency-band) to support the relay operation. This approach has limitations when a local fixed-point stationary RS does not exist. In addition, since the time-frame (or frequency-band) channel resources are pre-divided for the relay operation, there is no way to achieve high channel utilization using intelligent opportunistic techniques. In this paper, a different approach is considered, where the use of mobile/IoT devices as RSs is considered. In applications that use mobile/IoT devices as relay systems, due to the very limited battery energy of a mobile/IoT device and unequal channel conditions to and from the RS, both minimum energy consumption and QoS support must be considered simultaneously in the selection and configuration of RSs. Therefore, in this paper, a mobile RS is selected and configured with the objective of minimizing power consumption while satisfying end-to-end data rate and bit error rate (BER) requirements. For the RS, both downlink (DL) to the destination system (DS) (i.e., IoT device or user equipment (UE)) and uplink (UL) to the base station (BS) need to be adaptively configured (using adaptive modulation and power control) to minimize power consumption while satisfying the end-to-end QoS constraints. This paper proposes a minimum transmission power consuming RS selection and configuration (MPRSC) scheme, where the RS uses cognitive radio (CR) sub-channels when communicating with the DS, and therefore the scheme is named MPRSC-CR. The proposed MPRSC-CR scheme is activated when a DS moves out of the BS's QoS supportive coverage range. In this case, data transmissions between the RS and BS use the assigned primary channel that the DS had been using, and data transmissions between the RS and DS use CR sub-channels. The simulation results demonstrate that the proposed MPRSC-CR scheme extends the coverage range of the BS and minimizes the power consumption of the RS through optimal selection and configuration of a RS.