• Journal of Digital Contents Society
• /
• v.12 no.3
• /
• pp.391-396
• /
• 2011

During the last 5 years, maritime safety navigation with IT has been a big issue. After the International Maritime Organization defines the e-Navigation strategy, various information on board can be integrated by their needs and aims. Especially, on-board information monitoring might use the single integrated display under consideration of user convenience. To do this, this paper suggests a user interface design guideline based on definition and analysis of the integration requirements and the existing commercial product.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.961-964
• /
• 2008

There are researches in progress on ensuring the safety of the high impact concrete in case of fire which is a current rising social problem and this research institute also developed PFB technology, the explosion preventing technology. PFB technology is to apply POSCO E&C Fire Board, a fireproof board, with an adhesive agent on the construction site, and this technology passed 3-hour fireproof test and this technology was proven from a previous research that the temperature of main root is maintained under $200^{\circ}C$. Therefore, tests on basic contents was performed in this research before the actual construction, with a full scale of wooden prototype to apply PFB technology to actual construction sites and the tests were done on the workability of fireproof board, the adhesive power, the resistance against imprint of wooden nail, the heat conductivity and etc. As the results of these tests, PFB technology was proven to have an excellent workability at a construction site and to be easy for processing and also, this technology was proven to have a great resisting power against imprint of wooden nail. Therefore, this research has confirmed that PFB technology has no problem to be applied on a construction site.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.721-724
• /
• 2008

The present study was to develop a dry PFB method similar to the existing gypsum board construction method in order to apply the existing wet PFB method that uses fire.resistant adhesive. It was found that the existing wet method can produce concrete compressive strength of 80MPa and fire resistance of 3 hours with 30mm PF boards. The goal of development in this study was fire resistance of 3 hours through dry construction of 15mm fire resistant boards. The results of fire resistance test showed an increase in thermal durability and thermal strain. It is believed that inorganic fiber reduces thermal strain, and lowers heat insulation performance by 15% or less. This suggests that heat insulation performance was improved by the change in the inner composition of PF board resulting from the adjustment of Al:Si mol ratio, high temperature molding, and dry curing. According to the results of fire resistance test, when the dry PF method was applied, the temperature of the main reinforcing bar was 116$^\circ$C in 15mm, 103.8$^\circ$C in 20mm, and 94$^\circ$C in 25mm, and these results satisfied the current standards for fire resistance control presented by the Ministry of Land, Transport and Maritime Affairs. When a 3 hour fire resistance test was performed and the external properties of the specimen were examined, the outermost gypsum board hardly remained and internal PF board maintained its form without thermal strain.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.06a
• /
• pp.91-98
• /
• 2006

The purpose of this study is to investigate the opacity and printing strength of MG paper overlaid plywood. The printing strength of ink on MG paper can be evaluated effectively by a formula $E^{*2}=[(L^{*})^{2}+(a^{*})^{2}+(b^{*})^{2}]^{1/2}$ that we proposed. Higher E value indicates good printing strength of ink-on-paper. We also assess the real color of translucent printed MG paper with a formula CIE ${\bigtriangleup}E^{*}$ (color difference between a pile of same paper to be opaque and fancy paper laminated board). In addition, the color difference on paper surface caused by the color of wood-based board (bottom) can be evaluated by a formula of Pc. No. Generally, an acceptable appearance quality of fancy boards is ${\bigtriangleup}E^{*}$ <2.0 and small Pc.No. value. The experimental results showed that Japan-made MG papers -J1, J2 and J3 have better printing strength and gloss than that of Taiwan-made paper (T1). The reason for this was that Taiwan-made paper has poor printing strength and low gloss, which might be correlated to the fiber compositions in paper. Higher printing strength can be seen for short fiber containing handsheets when comparing to that of handsheets. Nonetheless, low-freeness sheets gives better printing strength than that of high-freeness sheets. High-opacity MG paper gives good opacifying effect to the fancy paper laminated wood-based boards. Comparing the surface color of 2 kinds of fancy paper laminated boards, paperboard T1 laminated with high-opacity fancy paper showed slight color difference. The same results can be seen for $??g/m^{2}$ handsheets. Higher-opacity Acacia and Eucalyptus bleached sulfate pulps (short fiber) gives higher opacifying effect on the plywood when comparing to Northan pine and Radiata pine sulfate pulps(long fiber). The former ones also showed small color differences when comparing the color differences between the color of fancy paper and laminated paper board. Additionally, the color of bottom plywood can't be shown through for the high-opacify surface paper adhered to. Besides, the PC No of the base paper laminated board is small as well. Apparently, we can add colorants to the binders for the manufscture of various handsheets ($30g/m^{2}$) with various pulp mix ratios to increase the opacity of paperboards to certain extents. When we using yellow and brown binders in paper laminated board, the color difference between Acacia and Eucalyptus handsheets overlaid boards decreasing to 2.0 (acceptable ${\bigtriangleup}E^{*}$ <2.0, hard to discern), but not much improvement for Northern and Radiata pines. Definitely, show-through defects can be discernible for lower opacity papers. In general, admirable printing strength of fancy paper by which glued to plywood can be made with high-opacity paper and colored binders techniques.

• Korean journal of food and cookery science
• /
• v.24 no.5
• /
• pp.706-712
• /
• 2008

This study was conducted to evaluate the sanitation level and use of dish cloths, chopping board, and drawer in the refrigerator in 50 university students' houses located in Seoul and Kyonggido. The survey questionnaire evaluated general information, frequency of the washing, cleaning method, drying method and the associated factors. The highest percentage of the cleaning and drying methods of dish cloths were “boiling(76.0%)”, and “dry in the kitchen or on the sink(78.0%)”, respectively. For the chopping board and drawer in the refrigerator, the highest percentage of cleaning method was “use detergent” and drying method was “dry in the kitchen”. The mean of coliforms for dish cloths, chopping board, and drawer in the refrigerator was 4.46${\pm}$1.95 log CFU/100 $cm^2$, 3.92${\pm}$1.64 log CFU/100 $cm^2$, 3.48${\pm}$2.01 log CFU/ 100 $cm^2$, respectively. Salmonella spp. were not detected from all samples. But E. coli were detected from dish cloths(4.0%) and S. aureus were detected from dish cloths(16.0%), chopping board(12.0%), and drawer in the refrigerator(8.0%). The results of microbiological test of kitchen utensils indicated that the sanitary conditions of dish cloths, chopping board, drawer in the refrigerator should be improve promptly.

• Educational Technology International
• /
• v.10 no.2
• /
• pp.127-143
• /
• 2009

The purpose of this study was to identify the interaction patterns in distance only mode e-Learning. In order to investigate this study, messages shown in the electronic notice board were analyzed to see how interaction occurs between teacher and learner or learner and learner under the e-learning of cyber university. To analyze messages was applied according to the framework by Henri's contents analysis model. As a result of contents analysis on electronic board, the participative dimension was 399 messages. A learner put on 7~8 messages a day. The number of messages was low compared to the number of learners, but the number of inquiries was about 140. That means that each learner contacts and checks messages at least once a day. The meaning dimension was 600 units. The main interaction patterns were Interactive-social-cognitive-metacognitive. This means that e-Learning in distance only mode leads a positive attitude of learners as a self-directed learning, and needs teacher's well-structured instructional strategies for increasing interaction. In conclusion, social dimension and interactive dimension of messages support learners psychologically in the process of learning though they directly guide learning under the circumstances of e-learning lacking face-to-face element. It can be interpreted that the teacher's role is significantly important in order to attract learners' positive participation and cognitive and meta-cognitive dimension of messages and activities

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.3
• /
• pp.81-87
• /
• 2009

Lightweight board has been used for manufacturing various fields of automotive interior trims for years. The GMPU board was constructed with glass fiber mat, honeycomb and polyurethane foamed using polyol and isocyanate materials which were sprayed by robot that is interlocked foaming machine. For more lightweight and cost reduction this paper shows how to optimize GMPU process parameters that related to foaming condition, robot position and robot velocity for polyurethane weight. The results show that flexural strength and modulus of board's specimens were evaluated by robot velocity and moving pattern. Based on that, a innovative process was developed for more lightweight and cost reduction.

• Steel and Composite Structures
• /
• v.9 no.1
• /
• pp.1-17
• /
• 2009

This paper is focused on the buckling and post buckling behaviour of rectangular corrugated board panels simply supported and subjected to compression load. The aim of the work is to understand the failure mechanism of investigated structure in order to quantify the effect of design parameters on the strength of a panel of given geometry. Two numerical models were developed adopting the finite element method. In the first one the corrugated board is represented by means of shell elements adopting an equivalent material, in the second the local structure is described in full detail modelling both straight and corrugated layers by means of shell elements and representing the connection between layers by special interface elements. The model correctness was checked by the comparison between out of plane central displacement predicted by the models and the experimental values found in literature. For the same case the effect of panel planarity error was evaluated. Finally a parametric analysis to investigate the effect of design parameters was carried out.

• Proceedings of the KIPE Conference
• /
• 2004.07b
• /
• pp.851-854
• /
• 2004

This paper studies Optical Fiber(OF) - LED illuminated display board system for energy saving. The OF-LED illuminated display board system has PV modules, batteries, and charge & discharge system, and dynamic full color display controller. Both maximum power point tracker (MPPT) and constant current & constant current controls (CCVC) are used In govern the charging system. It can be improve the charging efficiency of battery. The objective of this thesis paper is to build advertisement lighting system with OF-LED in to charge a 12-volts lead acid battery by using a field wired PV array. We saved the maintenance cost and developed of advertisement effectiveness. To verify the proposed OF-LED illuminated display board system for energy saving, the detail simulation and experiment results indicate that operating characteristics are verified by experiment with a laboratory prototype in this paper.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.2
• /
• pp.24-30
• /
• 2009

In this paper, the FPGA modem platform complying with 3GPP Release 7 eHSPA specifications and its regularized verification flow are proposed. The FFGA platform consists of modem board supporting physical layer requirements, MCU and DSP core embedded control board to drive the modem board, and peripheral boards for RF interfacing and various equipment interfaces. On the other hand, the proposed verification flow has been regularized into three categories according to the correlation degrees of hardware-software inter-operation, such as simple function test, scenario test call processing and system-level performance test. When it comes to real implementations, the emulation verification strategy for low power mobile SoC is also introduced.