• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.14-15
• /
• 2007

Proton irradiation technology was used for improvement of switching characteristics of the PT-IGBT. The proton irradiation was carried out at 5.56 MeV energy from the back side of processed wafers and at 2.39 MeV energy from the front side of the wafers. The on-state and off-state I-V characteristics and switching properties of the device were analyzed and compared with those of un-irradiated device and e-beam irradiated device which was conventional method for minority carrier lifetime reduction. The proton irradiated device by 5.56 MeV energy was superior to e-beam irradiated device for the on-state and off-state I-V characteristics, nevertheless turn-off time of proton irradiated device was superior to that of the e-beam irradiated device.

• Journal of the Korean Society for Heat Treatment
• /
• v.36 no.4
• /
• pp.193-197
• /
• 2023

Transparent and conducting titanium (Ti) doped indium oxide (TIO) thin films were deposited on the poly-imide (PI) substrate with radio frequency magnetron sputtering and then electron irradiation was conducted on the TIO film's surface to investigate the effect electron irradiation on the crystallization and opto-electrical properties of the films. All x-ray diffraction (XRD) pattern showed two diffraction peaks of the In₂O₂ (431) and (444) planes with regardless of the electron beam irradiation energy. In the AFM analysis, the surface roughness of as deposited films was 3.29 nm, while the films electron irradiated at 700 eV, show a lower RMS roughness of 2.62 nm. In this study, the FOM of as deposited TIO films is 6.82 × 10^-3 Ω^-1, while the films electron irradiated at 500 eV show the higher FOM value of 1.0 × 10^-2 Ω^-1. Thus, it is concluded that the post-deposition electron beam irradiation at 500 eV is the one of effective methods of crystallization and enhancement of opto-electrical performance of TIO thin film deposited on the PI substrate.

• Food Science of Animal Resources
• /
• v.30 no.4
• /
• pp.603-608
• /
• 2010

This study investigated the effects of electron beam irradiation on pathogens, quality, and functional properties of shell eggs during storage. A 1st grade 1-d-old egg was subjected to electron beam irradiation at 0, 1, 2, and 3 kGy, after which the number of total aerobic bacteria, reduction of inoculated Escherichia coli and Salmonella Typhimurium, egg quality, and functional properties were measured. Electron beam irradiation at 2 kGy reduced the number of E. coli and S. Typhimurium cells to a level below the detection limit (<$10^2$ CFU/g) after 7 and 14 d of storage. Egg freshness as measured by albumen height and the number of Haugh units was significantly reduced by 1-kGy irradiation. The viscosity of irradiated egg white was also significantly decreased by increased irradiation, whereas its foaming ability was increased. Electron beam irradiation also increased lipid oxidation in egg yolks. These results suggest that electron beam irradiation reduces the freshness of shell eggs while increasing the oxidation of egg yolk and improving important functional properties such as foaming capacity. Electron beam irradiation can also be applied to the egg breaking process since the irradiation reduces the viscosity of egg white, which can allow egg whites and yolks to be separated with greater efficiency.

• Transactions on Electrical and Electronic Materials
• /
• v.9 no.5
• /
• pp.202-205
• /
• 2008

We have studied the liquid crystal (LC) orientation behavior on the organic hybrid overcoat layer with ion beam irradiation. Excellent LC alignments of the nematic liquid crystal (NLC) on the ion beam irradiated organic hybrid overcoat layers were observed in various intensities above 600 eV. Pretilt angles of the NLC on the organic hybrid overcoat layers for all ion beam energy intensities were observed from 0.2 to 0.5 degrees. Also, we used the atomic force microscopy (AFM) images for measuring the roughness of the organic hybrid overcoat layers with ion beam irradiation before and after. The surface of organic hybrid overcoat layers was leveled off by the ion beam irradiation. Finally, a good LC alignment thermal stability on the organic hybrid overcoat layer with ion beam irradiation can be achieved.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.10
• /
• pp.2969-2973
• /
• 2014

A new process to fabricate a composite LSCF-Ag cathode material for SOFCs by electron beam (e-beam) irradiation process has been suggested for operation under intermediate temperature range of $600-700^{\circ}C$. A composite LSCF-Ag cathode with uniformly coated Ag nanoparticles on the surface of the LSCF material was prepared by a facile e-beam irradiation method at room temperature. The morphology of the composite LSCF-Ag material was analyzed using a TEM, FE-SEM, and EDS. The prepared composite LSCF-Ag material can play a significant role in increasing the electro-catalytic activities and reducing the operating temperature of SOFCs. The performance of a tubular single cell prepared using the composite LSCF-Ag cathode, YSZ electrolyte and a Ni/YSZ anode was evaluated at reduced operating temperature of $600-700^{\circ}C$. The micro-structure and chemical composition of the single cell were investigated using a FE-SEM and EDS.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.47-47
• /
• 2003

• Applied Chemistry for Engineering
• /
• v.25 no.2
• /
• pp.227-232
• /
• 2014

Depolymerization of sodium alginate (SA) was carried out by electron beam irradiation in a hydrogen peroxide atmosphere. E-beam with 1.0 and 2.5 MeV of accelerating voltages were employed in this experiment. For control of molecular weight and the radiation yield of scission ($G_s$), the irradiation dosage of e-beam was managed in a range from 2.5 to 20 kGy while the quantity of hydrogen peroxide was adjusted in a range of 0 to 4.5%. The chemical structure of the depolymerized sodium alginate (DSA) was analyzed to have scission of 1,4-glycoside bond mainly and a few fragmentary formate end groups which may be produced by the cleavage between C2 and C3 in repeating unit of alginate. It turned out to have simple chemical structures at the DSA end groups, produced by e-beam irradiation, similar with those in the polymer SA structure. As a result, the molecular weight of SA decreased as the energy and dosage of applied e-beam increased, and the radiation yield of scission showed the best result at 2w/v% in SA concentration. The highest radiation yield of scission ($7.919{\times}10^4mol/J$) was confirmed when an irradiation dosage of 20 kGy (2 MeV) and 1.5% hydrogen peroxide were used in 2% SA aqueous solution.

• Transactions of the Korean hydrogen and new energy society
• /
• v.27 no.3
• /
• pp.298-305
• /
• 2016

In this study, we treated pitch-based activated carbon fibers (ACFs) in hydrogen peroxide using electron beam (E-beam) irradiation to improve nitrogen monoxide (NO) sensing ability as an electrode material of gas sensor. The specific surface area of ACFs treated by E-beam irradiation with 400 kGy increased from $885m^2/g$ (pristine) to $1160m^2/g$ without any changes in structural property and functional group. The increase in specific surface area of the E-beam irradiated ACFs enhanced NO gas sensing properties such as response time and sensitivity. When the ACFs irradiated with 400 kGy, response time was remarkably reduced from 360 s to 210 s and sensitivity was increased by 4.5%, compared to the pristine ACFs. These results demonstrate convincingly that surface modification of ACFs using E-beam in hydrogen peroxide solution can enhance textural properties of ACFs and NO gas sensing ability of gas sensor at room temperature.

• Journal of the Korean GEO-environmental Society
• /
• v.12 no.2
• /
• pp.63-68
• /
• 2011

The aim of this study was 1,4-dioxane's degradation efficiency and toxicity test applying E-beam. The experiments were shows that the degradation efficiency in the initial concentration of 1,4-dioxane and the irradiation capacity of E-beam and the degree of mineralization based on a change of scavenger gas. The biological toxicity test by using on of green algae, Pseudokirchneriella Subcapitata was conducted to lead the reducing toxicity. Degradation efficiency of 1,4-dioxane was improved when E-beam irradiation intensity was higher and the efficiency of TOC removal using Radical scavenger gas was increased by $N_2O$, $O_2$ and $N_2$ in order. In 4 days(96hrs), toxicity test results indicated that toxicity effect was decreased by increase of E-beam irradiation intensity.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.3
• /
• pp.984-990
• /
• 2014

Polymers are the most commonly used di-electrics because of their reliability, availability, ease of fabrication and cost. The commercial and industrial demand for advanced polymeric materials which are capable of being used in harsh environment is need of the hour. The study of the effect of electron beam irradiation on polymeric materials is an area of rapidly increasing interest. This paper discusses the resultant beneficial effects of electron beam irradiation on the SiR-EPDM blend having 50:50 composition. The changes in mechanical and electrical properties of SiR-EPDM blend which are exposed to three different doses of electron beam radiation namely 5 Mrad, 15 Mrad and 25 Mrad are presented. The irradiated blends are analyzed for their electro-mechanical and physico chemical properties. The electrical changes induced by irradiation are investigated by arc resistance, surface resistivity and volume resistivity measurements as per ASTM standards. The mechanical changes are observed by the measurement of tensile strength and elongation at break. Physico chemical investigation has been done using the FTIR, in order to investigate the irradiation induced chemical changes.