• Title/Summary/Keyword: Dynamics M&S

Search Result 635, Processing Time 0.032 seconds

Analysis for the Driving Dynamic Characteristics of Large Scale Semi-Trailer Equipped with Swivel Axle and Hydropneumatic Suspension Unit (회전 차축 및 유기압 현가장치를 장착한 대용량 세미 트레일러의 주행 동특성 해석)

  • Ha, Taewan;Park, Jungsoo
    • Journal of the Korea Institute of Military Science and Technology
    • /
    • v.25 no.2
    • /
    • pp.196-209
    • /
    • 2022
  • Driving dynamic characteristics of semi-trailer loaded with precise equipments are very important to protect them from vibration, impact or other disturbances. In this paper, in order to identify the driving dynamic characteristics of the large scale semi-trailer equipped with swivel axle and hydropneumatic suspension unit, Dynamics Modeling & Simulation(M&S) were performed using general Dynamics Analysis Program(RecurDyn V9R2). The semi-trailer was modeled as two types - one is Multi Rigid Body Dynamics(MRBD) model, and the other Rigid-Flexible Body Dynamics(RFlex) one. The natural vibration mode and frequencies of semi-trailer body, acceleration of dummy-weight, pitch, roll and yaw of dummy-weight, swivel axle and hydropneumatic suspension cylinder support structure, and acting force of hydropneumatic suspensions etc. were obtained from the M&S. Additionally frequency analysis were performed using the data of behavior obtained from above M&S. Generally the quantitative results of RFlex are larger than them of MRBD in view of magnitude of the comparable parametric values.

Driving Dynamic Characteristics of Tractor-Trailer Type Transporter for Large Scale Precision Equipment (대형 정밀장비 탑재용 트랙터-트레일러형 차량의 주행 동특성)

  • Ha, Taewan;Oh, Sanghoon
    • Journal of the Korea Institute of Military Science and Technology
    • /
    • v.22 no.5
    • /
    • pp.687-696
    • /
    • 2019
  • To identify the driving dynamic characteristics of the Tractor-Trailer Type Transporter for mounting a large scale precision equipment, real vehicle driving tests on the 3 inch-bump-space-road were performed. And using general Dynamics Analysis Program - RecurDyn(V8R5), Dynamics M&S were carried out assuming the similar condition with real tests. Then the acceleration data obtained from real tests and M&S were analyzed and compared with each other in the part of root-mean-square-acceleration($g_{rms}$), peak-acceleration($g_{peak}$) and frequencies. In simple view of the $g_{rms}$ & $g_{peak}$, although the results of MRBD are more similar to ones of the real vehicle driving tests, but the results of RFlex have more information to get various useful dynamic characteristics.

Evaluation of Commercial Pheromones on the Population Dynamics of Spodoptera frugiperda (J. E. smith) and Mythimna loreyi (Duponchel) (Lepidoptera: Noctuidae)

  • Seo Yeon Hong;Hwi Jong Yi;Young Nam Yoon;Yun Woo Jang;Ki Do Park;Rameswor Maharjan
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.67 no.4
    • /
    • pp.285-295
    • /
    • 2022
  • The trapping efficacy of five commercially available sex pheromones manufactured in Korea, the Netherlands, North America, China, and Costa Rica was evaluated to determine the population dynamics of Spodoptera frugiperda and Mythimna loreyi and their relationships with the weather parameters of maize fields in Miryang, Gyeongnam Province, Korea in 2019. The results show that the sex pheromone manufactured in Costa Rica were more efficient at capturing S. frugiperda and M. loreyi than those manufactured in other countries. The lowest number of S. frugiperda moths were captured using sex pheromones manufactured in the Netherlands. We noted that more than four population peaks of both the moth species and weather parameters influenced the moth population dynamics in Miryang. A positive relationship was observed between the population of S. frugiperda and weather parameters, such as mean temperature, rainfall, and relative humidity, for sex pheromones manufactured in Korea. Furthermore, a positive relationship was recorded between the population of M. loreyi and wind speed for the sex pheromone manufactured in Korea. The results of this study suggest that the sex pheromones manufactured in Costa Rica are the best solution for the efficient capture of S. frugiperda and M. loreyi under typical weather conditions in the southern parts of Korea. In addition, the outcomes of this study are discussed in terms of population dynamics and integrated pest management for S. frugiperda and M. loreyi as alternatives to chemical management by maize producers. Further studies related to the continuous improvement in the capture efficiency of both moth species using sex pheromones are now needed.

Dynamics of Transverse Magnetic Domain Walls in Rectangular-shape Thin-film Nanowires Studied by Micromagnetic Simulations

  • Lee, Jun-Young;Choi, Sang-Kook;Kim, Sang-Koog
    • Journal of Magnetics
    • /
    • v.11 no.2
    • /
    • pp.74-76
    • /
    • 2006
  • Dynamic behaviors of transverse domain walls (TDWs) in rectangular shaped thin-film magnetic nanowires with different widths under applied magnetic fields less than the Walker field were studied by micromagnetic simulations. It was found that the velocity of stable TDWs in the viscous region increases from 147 to 419 m/s and their mass decreases from $6.24{\times}10^{-23}\;to\;2.70{\times}10^{-23}kg$ with increasing strength of the applied magnetic field ranging from 5 to 20 Oe for the nanowire with a dimension of 10 nm in thickness and $5{\mu}m$ in length, and 50 nm in width. With increasing the width of nanowires from 50 to 125 nm at a specific field strength of 5 Oe, the TDW's velocity also increases from 147 to 246 m/s and its mass decreases from $6.24{\times}10^{-23}\;to\;5.91{\times}10^{-23}kg$.

Vehicle Reference Dynamics Estimation by Speed and Heading Information Sensed from a Distant Point

  • Yun, Jeonghyeon;Kim, Gyeongmin;Cho, Minhyoung;Park, Byungwoon;Seo, Howon;Kim, Jinsung
    • Journal of Positioning, Navigation, and Timing
    • /
    • v.11 no.3
    • /
    • pp.209-215
    • /
    • 2022
  • As intelligent autonomous driving vehicle development has become a big topic around the world, accurate reference dynamics estimation has been more important than before. Current systems generally use speed and heading information sensed from a distant point as a vehicle reference dynamic, however, the dynamics between different points are not same especially during rotating motions. In order to estimate properly estimate the reference dynamics from the information such as velocity and heading sensed at a point distant from the reference point such as center of gravity, this study proposes estimating reference dynamics from any location in the vehicle by combining the Bicycle and Ackermann models. A test system was constructed by implementing multiple GNSS/INS equipment on an Robot Operating System (ROS) and an actual car. Angle and speed errors of 10° and 0.2 m/s have been reduced to 0.2° and 0.06 m/s after applying the suggested method.

Comparative Study on the Growth Dynamics of Some Grasses (몇 종의 벼과식물에 관한 생장동태의 비교 연구)

  • Choung, Yeon-Sook
    • The Korean Journal of Ecology
    • /
    • v.16 no.3
    • /
    • pp.329-339
    • /
    • 1993
  • Effects of relative light intensity and N, P fertilization on the growth and ramet dynamics of the rhizomatous plants, Arundinella hirta, Miscanthus sinensi and Spdiopogon sibiricus were studied in Chuncheon, Kangweon-Do. Ramets emerged in one pulse a year, withered in one pulse at the end of the growing season in M. sinensis and S. sibircus stands, while the birth and death pulse in A. hirta stands were two times. Total births of ramet were 9 times and 3.6 times greater in the unshaded fertilized stands of A. hirta and M. sinensis than in the shaded, However, those of S.sibiricus were 2.1 times greater in the shaded stands. Flowering rates of A. hirta, M.sinensis and S.sibiricus I the unshaded fertilized stands were 1.8, 2.7 and 1.04 times greater than in the shaded unfertilized stands, respectively. Height of ramets of A. hirta and M.sinensis were the hightest in the unshaded fertilized stands. However, that of s.sibiricus was the highest in the shaded fertilized stand. Aboveground production of A.hirta in the fertilized stand was 2.4 times greater in the unshaded stand than in the shaded one. Results of inflorescence frequency, shoot height and the ratio of aboveground to belowground were smiliar to the total births. The added fertilizer markedly increased the ramet density and the shoot productivity of three rhizomatous plants, especially of A. hirta.

  • PDF

Fine-tuning of gene expression dynamics by the Set2-Rpd3S pathway

  • Lee, Bo Bae;Kim, Ji Hyun;Kim, TaeSoo
    • BMB Reports
    • /
    • v.50 no.4
    • /
    • pp.162-163
    • /
    • 2017
  • RNA polymerase II-interacting the Set2 methyltransferase co-transcriptionally methylates histone H3 at lysine 36 within the body of genes. This modification facilitates histone deacetylation by Rpd3S HDAC in 3' transcribed regions to suppress cryptic initiation and slow elongation. Although this pathway is important for global deacetylation, no strong effects have been seen on genome-wide transcription under optimized laboratory conditions. In contrast, this pathway slows the kinetics of mRNA induction when target genes are induced upon environmental changes. Interestingly, a majority of Set2-repressed genes are overlapped by a lncRNA transcription that targets H3K36 methylation and deacetylation by Rpd3S HDAC to mRNA promoters. Furthermore, this pathway delays the induction of many cryptic transcripts upon environmental changes. Therefore, the Set2-Rpd3S HDAC pathway functions to fine-tune expression dynamics of mRNAs and ncRNAs.

Numerical Study on Propylene Vertical Wall Fires (프로필렌 수직벽 화재의 수치적 연구)

  • Park, Woe-Chul
    • Fire Science and Engineering
    • /
    • v.23 no.5
    • /
    • pp.133-137
    • /
    • 2009
  • The Fire Dynamics Simulator (FDS), a computational fluid dynamics model for fire simulation, was applied to propylene vertical wall fires, to confirm its accuracy in simulation of vertical wall fires. The temperature profiles at the center of the burner obtained for mass loss rates per unit area in the range of $7.0{\sim}29.29g/m^2-s$ were compared with those of experiment. Comparisons of the heat flux distributions along the vertical centerline on the wall surface were made with the measurements. It was shown that the computed temperature profiles were in good agreement with the experiment. It was also noted that the peak temperature near the wall was underpredicted, the heat flux was too high compared with the measurements, and hence improvements are required for FDS in simulation of the vertical wall fires.