• Journal of Microbiology and Biotechnology
• /
• v.23 no.2
• /
• pp.195-204
• /
• 2013

While structured packing modules are known to be efficient for surface wetting and gas-liquid exchange in abiotic surface catalysis, this model study explores structured packing as a growth surface for catalytic biofilms. Microbial biofilms have been proposed as selfimmobilized and self-regenerating catalysts for the production of chemicals. A concern is that the complex and dynamic nature of biofilms may cause fluctuations in their catalytic performance over time or may affect process reproducibility. An aerated continuous trickle-bed biofilm reactor system was designed with a 3 L structured packing, liquid recycling and pH control. Pseudomonas diminuta established a biofilm on the stainless steel structured packing with a specific surface area of 500 $m^2m^{-3}$ and catalyzed the oxidation of ethylene glycol to glycolic acid for over two months of continuous operation. A steady-state productivity of up to 1.6 $gl^{-1}h^{-1}$ was achieved at a dilution rate of 0.33 $h^{-1}$. Process reproducibility between three independent runs was excellent, despite process interruptions and activity variations in cultures grown from biofilm effluent cells. The results demonstrate the robustness of a catalytic biofilm on structured packing, despite its dynamic nature. Implementation is recommended for whole-cell processes that require efficient gas-liquid exchange, catalyst retention for continuous operation, or improved catalyst stability.

• PNF and Movement
• /
• v.21 no.3
• /
• pp.291-298
• /
• 2023

Purpose: This study aimed to suggest an effective exercise for treating anterior cruciate ligament (ACL) and hamstring injuries based on the dynamic control ratio (DCR) for the hamstring and quadriceps during eccentric hamstring exercises. Methods: Twenty-four healthy participants participated in this study. The participants performed three eccentric hamstring exercises, including the Nordic exercise, the supine leg curl, and single-leg deadlifts. During the eccentric hamstring exercises, the vastus medialis oblique (VMO), vastus lateralis (VL), biceps femoris (BF), and semitendinosus (ST) were measured using surface electromyography. Results: The DCR was significantly lower during the supine leg curl and single-leg deadlift than during the Nordic exercise (p < 0.05). The activity of the VMO and VL was significantly greater during the supine leg curl than during the Nordic exercise and the single-leg deadlift (p < 0.05). VL activity was significantly higher during the single-leg deadlift than during the Nordic exercise (p < 0.05). ST activity was significantly higher during the supine leg curl and Nordic exercise than during the single-leg deadlift (p < 0.05). BF activity was significantly higher during the supine leg curl than during the Nordic exercise and single-leg deadlift (p < 0.05). Finally, the BF showed significantly higher activity during the Nordic exercise compared to during the single-leg deadlift (p < 0.05). Conclusion: Based on the DCR ratio and quadriceps activity, the supine leg curl should be introduced early in rehabilitation for ACL injuries.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.244-249
• /
• 1997

Internal and external heat sources will cause to deform to machine elements in the contact joint of structure,which results in the change of contact pressure distribution different from initial assembly. Heat induced variations of contact pressure will change the static and dynamic properties such as contact stiffness,damping as well as contact heat conduction in the structure. In order to design and control the intelligent machine tool operating in variant conditions more sophisticatedly, the good prediction for the changes of prescribed propeties are strongly required especially in the contact elements adjacent to the rotational or linear bearing This paper presents some computational and experimental results in regard to static and dynamic characteristics of the press-fitted bush and shaft assembly which is a model of the bearing innerrace and shaft assembly. In the condition of heat generation on the outer surface of the bush,the effects of changes in the negative clearance and the heat flux on pressure distribution and dynamic properties are investigated. Results of this study show that the edge effect of the bush and the initial clearance have effects on the transient dynamic characteristics significantiy.

• Journal of Institute of Control, Robotics and Systems
• /
• v.9 no.4
• /
• pp.329-339
• /
• 2003

A neural network based adaptive controller design method is proposed for reconfigurable flight control systems in the presence of variations in aerodynamic coefficients or control effectiveness decrease caused by control surface damage. The neural network based adaptive nonlinear controller is developed by making use of the backstepping technique for command following of the angle of attack, sideslip angle, and bank angle. On-line teaming neural networks are implemented to guarantee reconfigurability and robustness to the uncertainties caused by aerodynamic coefficients variations. The main feature of the proposed controller is that the adaptive controller is designed with assumption that not any of the nonlinear functions of the system is known accurately, whereas most of the previous works assume that only some of the nonlinear functions are unknown. Neural networks loam through the weight update rules that are derived from the Lyapunov control theory. The closed-loop stability of the error states is also investigated according to the Lyapunov theory. A nonlinear dynamic model of an F-16 aircraft is used to demonstrate the effectiveness of the proposed control law.

• The Journal of Korean Physical Therapy
• /
• v.29 no.2
• /
• pp.55-61
• /
• 2017

Purpose: The purpose of this study was to investigate the effects of a task-oriented upper arm exercise performed in a sitting position on either an unstable support surface or a stable support surface for children with cerebral palsy. Methods: We prospectively evaluated 18 children with cerebral palsy. Eight subjects were randomly assigned to each of the stable and unstable support surface groups. We performed the upper arm exercise three times a week for 6 weeks. To confirm the effects of the intervention, the berg balance scale test, modified functional reaching test (MFRT), timed up and go test (TUG), and Jebsen-Taylor hand function test were conducted before and after the study. Results: Significant differences were observed in MFRT and TUG between the experimental and control groups (p<0.05). In the Jebsen-Taylor hand function test, there were significant differences between the groups for the items picking up small objects, stacking checkers, lifting large light objects, and lifting large heavy objects (p<0.05), but not for writing and stimulation of feeding. Significant differences were observed between the groups in items of card turning, lifting large light objects, and lifting heavy objects. Conclusion: The purpose of this study was to evaluate the effectiveness of a task-oriented upper extremity exercise program for dynamic balance and hand function performed in a sitting position with either stable or unstable support by cerebral palsy patients. There were improvements in the two groups, but performing the exercise while sitting on an unstable support surface had a greater effect on dynamic balance and hand function than exercise while sitting on a stable supporting surface. The results of this study can be used to improve the daily lives of cerebral palsy patients.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.9 no.3
• /
• pp.170-178
• /
• 2007

Rapid increases in the concentrations of greenhouse gases and many other chemically important trace gases have occurred over the last several centuries. For understanding the roles of these important gases in global change, it is essential to identify their sources and sinks, to characterize biogenic gas fluxes between the biosphere and atmosphere, and to understand the processes that control them. In this paper, enclosure-based measurements are described in a practical manner for field experiments. Theoretical reviews of mass balance equation in the enclosure and sensitivity of the flow-through dynamic flux chamber technique are presented; specifically for the case of NO flux measurements from soil surface. The physical system and theory behind the flow-through dynamic flux chamber method are examined. New calculation flux formula was introduced by considering NO chemical loss on chamber wall and uncertainties of the NO flux calculation were discussed.

• Proceedings of the Society of Korea Industrial and System Engineering Conference
• /
• 2002.05a
• /
• pp.461-466
• /
• 2002

In many applications of computer aided geometric design and computer graphics, B-spline is one of the most popular representation for curves and surfaces, and the evaluation of B-spline curves and surfaces is the most frequently used operation. For the evaluation and others, the power form representation of the curves and surfaces is preferred because it is possible to speed-up the operation using Horner's rule. In this paper, we present a new algorithm for the above-mentioned conversion focusing on a dynamic case. Experiment shows that the proposed algorithm significantly outperforms the conventional approach when one or more control points of a B-spline curve and surface are dynamically moving.

• Journal of the Korean Society for Precision Engineering
• /
• v.33 no.10
• /
• pp.857-864
• /
• 2016

In this study, we proposed a novel concept of electric sun visor comprising a dark, see-through sun shade material that ensures unimpaired driver's vision with continuous control of the shade position. The shade extending from the windshield base along its surface may be subjected to severe vibration during driving unless the design parameters are carefully selected. A prototype was tested to collect acceleration data during driving. Based on the test data, an ADAMS dynamics model was validated. The mechanism of sun visor was optimized to minimize vibration based on the dynamics model, experimental design, and response surface method.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1993.05a
• /
• pp.122-125
• /
• 1993

We investigated the structural changes of the organic molecules of azobenzene-containing long-chain fatty acids which show the cis-trans photo-isomerization characteristics. The dynamic behavior of these polar molecules on the water surface of the Kuhn type LB deposition apparatus was detected electrically by using the displacement current method.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.6 s.249
• /
• pp.615-621
• /
• 2006

Increased application of optical disks requires more improved dynamic stability of rotating disks. In this study, a new concept of controlling the processing conditions of injection molded disks was developed to improve vibration characteristics. The critical speed, which shows stiffness and dynamic stability of disk, is affected by the residual stress distribution; this varies as functions of distance from the gate and processing condition. The critical speed of disk was calculated with the initial stress taken into consideration, which was determined from injection molding simulation. Choosing melt temperature, mold temperature, filling speed and packing pressure as design parameters, critical speed is maximized with the method of response surface. It is shown that the stability of injection molded disk has been improved for the new condition obtained as a result of the study proposed.