• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• 제16권1호
• /
• pp.1-13
• /
• 2011

The Yellow Sea Cold Water (YSCW) is formed by cold and dry wind in the previous winter, and is known to spread southward along the central trough of the Yellow Sea in summer. Water characteristics of the YSCW and its movement in the northern East China Sea (ECS) are investigated by analyzing CTD (conductivity-Temperature-Depth) data collected from summertime hydrographic surveys between 2003 and 2009. By water mass analysis, we newly define the North Western Cold Water (NWCW) as a cold water mass observed in the study area. It is characterized by temperature below $13.2^{\circ}C$, salinity of 32.6~33.7 psu, and density (${\sigma}_t$) of 24.7~25.5. The NWCW appears to flow southward at about a speed less than 2 cm/s according to the geostrophic calculation. The newly defined NWCW shows an interannual variation in the range of temperature and occupied area, which is in close relation with the sea surface temperature (SST) over the Yellow Sea and the East China Sea in the previous winter season. The winter SST is determined by winter air temperature, which shows a high correlation with the winter-mean Arctic Oscillation (AO) index. The negative winter-mean AO causes the low winter SST over the Yellow Sea and the East China Sea, resulting in the summertime expansion and lower temperature of the NWCW in the study area. This study shows a dynamic relation among the winter-mean AO index, SST, and NWCW, which helps to predict the movement of NWCW in the northern ECS in summer.

• Archives of design research
• /
• 제18권3호
• /
• pp.117-128
• /
• 2005

The French Belle Epoque is a period where the literary and artistic movement was very activated. The birth of the cubism reflects this atmosphere of the times and the change of paradigm in all fields. The Bergsonism is often designated as one of the important backgrounds of cubism. The problem consists in knowing if Bergsonian ideas gave real influence on the cubist movement and up to what point. Our analysis will show that it is not homogenous and very variable according to painters. In the case of Picasso and Braques it seems be a simple inspiration of Zeitgeist. But the influence upon Metzinger and Gleizes is explicit. The text of 1912, Du cubism, prove their attachment to his thought. The key concept of cubist theory, influenced by Bergsonian philosophy, is the concept of simultaneity. Cubist simultaneity is in one hand a reflection of an artist's psychological experience and the other hand a synthesis of multiple views for grasping the object in itself by the way of conceptual representation. The temporal simultaneity could be identified with the notion of memory, which is a temporal continuity connecting the past to dynamic present. The spatial simultaneity is a juxtaposition of multiple views obtained by the movement around the object. But the dose reading of Bergson's text shows that there is a divergence between the notion of cubist simultaneity and his ideas. The biased interpretation is often, as well as the strict understanding, like the history shows us well, a great source of inspiration and creativity. The cubist mouvement is not far from this case.

• Journal of the Korean Society of Costume
• /
• 제36권
• /
• pp.183-203
• /
• 1998

The wave of Avant-garde swept away all in the unique social background so called 'October Revolution' and the early 1900 Russian society which was able to absorb and accept anything. The Russian avant-garde has been affected by the Cubism and the Futurism those had peculiarly appeared in the early twentieth century, spreaded out to three spheres: the Suprematism, the Rayonism and the Constructivism. The Russian Constructivism has appeared in this background, concretely and ideally ex-pressed the ideology of the revolution into the artistic form and made an huge influence to the whole Russian society. The Constructivist like Tatlin, naum Gabo, Pevaner, Rodchenko, Stepanova, Popova and Exter gave great effect on the Soviet Constructive fashion design in 1920's after the Revolution. The Soviet costume in 1920s hold in common the characteristicss of the Constructive graphic as it is, geometrical and abstractive form, energetic and motility. In fashion design, these graphic qualities have been showed as the application of geometrical form and architectural image, physical distortion and transformation. And in textile design, the simple, dynamical presentation has been appeared. We can classify the Soviet costume at this time into three occasions. The first term is from late 1910 th mid 1920, and it is altered from folk costume design to modern one. With Lamanova as the first on the list, using the folk mitif, the Constructive expression of simple form has been gradually revealed in design. Designers like Makarova, Pribylskaia and Mukhina produced the plane, simple chemise style with the decoration of the Russian traditional motif. From early to late 1920 is the second term, and it is at the pick of the most active processing of the Constructive design. Not only at the costume in daily life but also at the theatrical costume and textile, the con-structive design has been represented all avail-able fields. Many Constructivists including Stepanova, Popova, Exter and Rodchenko took part in the textile design and costume design so as to evlvo their aesthetic concept. The third term is from late 1920 to early 1930. The socialistic realism has dominated over the whole culture and art, the revolutionary dynamic motif has been presented also in textile design. The formative features of Soviet Constructive fashion design are; silhouette, from, motif, color and fabric. The first, the silhouette : a straight rectangular silhouetted has been expressed through the whole period and a volumed one with distorted human body shape has introduced in the theatrical costume design. The second, the form: many lengthened rectangular forms have been made at beginnings, but to the middle period, geometrical, architectural forms have been more showed and there are energy and movement in design. At the last period, only a partial feature-division has been seen. The third, the motif; no pattern or ethnic motif has been partly used at beginnings, a figure like circle, tri-angle has gradually appeared in textile design. At latter period, a real-existent motif like an airplane has been represented with graphing and simplicity. The fourth, the color ; because of insufficient dyeing, neutral color like black or grey color has been mainly covered, but after middle term, a primary color or pastel tone has been seen, contrast of the fabric; without much development of textile industry after the Revolution, thick and durable fabrics have been the main stream, but as time had going to the last period, fabrics such as linen, cotton, velvet and silk have been varously choesn. At the theatrical costume, new materials like plastics and metals that were able to accentuate the form. The pursuit of popularity, simplicity and functionalism that the basic concept of Constructive fashion is one of the "beauty" which has been searching in modern fashion. And now we can appreciate how innovative and epochal this Soviet Constructive fashion movement was.ement was.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• 제49권3호
• /
• pp.51-59
• /
• 2012

This paper suggests an efficient method which tracks articulated human body modeled with markov network using disparity map derived from stereo images. The conventional methods which only use color information to calculate likelihood for energy function tend to fail when background has same colors with objects or appearances of object are changed during the movement. In this paper, we present a method evaluating likelihood with both disparity information and color information to find human body parts. Since the human body part are cylinder projected to rectangles in 2D image plane, we use the properties of distribution of disparity of those rectangles that do not have discontinuous distribution. In addition to that we suggest a conditional-messages-update that is able to reduce unnecessary message update of belief propagation. Since the message update has comprised over 80% of the whole computation in belief propagation, the conditional-message-update yields 9~45% of improvements of computational time. Furthermore, we also propose an another speed up method called three dimensional dynamic models assumed the body motion is continuous. The experiment results show that the proposed method reduces the computational time as well as it increases tracking accuracy.

• Proceedings of the Korea Contents Association Conference
• /
• 한국콘텐츠학회 2006년도 추계 종합학술대회 논문집
• /
• pp.824-828
• /
• 2006

Introduction of motion capture system to the field of digital entertainment paved the way to accelerate the development of 3D character animation all the more. Motion capture system has been developed of the level that it can capture the fierce motions of character particularly in the digital game image and improve the dynamic characteristics by capturing the movement of human muscle or express the human's true emotion by capturing wrinkles and expression on face. Such an extension of realistic expression enables them to be used increasingly in movie, TV, advertisement, music video, etc centering around the game industry in the field of digital entertainment. The fact is, however, that many difficulties are held in the image production process compared with the competing countries such as USA and Japan, owing to inferiorities in technical expertise and capital in the image production process using the local motion capture, insufficient professional human resources of motion capture and small size of local motion capture image market. Hence, this study intends to suggest the plan to improve the technical problems in terms of integrated motion capture system, motion capture professional human resources and motion capture in-house program development in the production process of digital entertainment image using the motion capture system by surveying local and overseas examples of image production.

• Journal of Korean Society of Transportation
• /
• 제17권4호
• /
• pp.59-69
• /
• 1999

A Freeway corridor is a network consisting of a few Primary longitudinal roadways (freeway or major arterial) carrying a major traffic movement with interconnecting roads which offer the motorist alternative paths to his/her destination. Control measures introduced to ameliorate traffic performance in freeway corridors typically include ramp metering at the freeway entrances, and signal control at each intersections. During a severe freeway incident, on-ramp metering usually is not adequate to relieve congestion effectively. Diverting some traffic to the Parallel surface street to make full use of available corridor capacity will be necessary. This is the purpose of the traffic management system. So, an integrated traffic control scheme should include three elements. (a)on-ramp metering, (b)off-ramp diversion and (c)signal timing at surface street intersections. The purpose of this study is to develop an integrated optimal control model in a freeway corridor. By approximating the flow-density relation with a two-segment linear function. the nonlinear optimal control problem can be simplified into a set of Piecewise linear programming models. The formulated optimal-control Problem can be solved in real time using common linear program. In this study, program MPL(ver 4.0) is used to solve the formulated optimal-control problem. Simulation results with TSIS(ver 4.01) for a sample network have demonstrated the merits of the Proposed model and a1gorithm.

• Journal of the korean academy of Pediatric Dentistry
• /
• 제30권3호
• /
• pp.348-353
• /
• 2003

Early detection and prudent management of mesiodens or supernumerary tooth should be considered essential in reducing disturbance in the eruption and position of the adjacent permanent incisor. While it is true that the presence of diastema may be regarded as normal at the early mixed dentition stage, the early detection and removal of the mesiodens is a prerequisite to facilitate spontaneous alignment or subsequent approximation of the permanent central incisors. In many cases, diastema due to mesiodens can be physiologically corrected spontaneously after the extraction of mesiodens. The best choice of treatment of diastema may be observation. Orthodontic intervention is required only spontaneous closing of diastema does not occur within observation period. In orthodontic intervention, careful treatment plan should be established. Clinician gives considerations to angulation of central and lateral incisor, proximity of lateral incisor, developmental stage and position of canine, pattern and extent of anterior crowding. Orthodontic movement should be done slowly with light force. In addition, periodic radiographic observation are needed to monitor the root development and root resorption. Case 1, 2 and 3 showed physiologic closures after the extraction of mesiodens. In these cases, acceptable alignment of central and lateral incisors was obtained. In case 4, orthodontic correction for diastema was performed successfully after the extraction of mesiodens. After the orthodontic closure of the diastema, it was decided that a retainer was not needed, because the dentition was under a dynamic stage in exchanging teeth and also developing arches.

• Journal of the Korean Society of Costume
• /
• 제66권8호
• /
• pp.14-32
• /
• 2016

This study examines the morphological expression type and formative characteristics of women's shoes designs that integrate 3D printing technology. The results of the study are as follows. First, the morphological expression types of contemporary shoes that integrate 3D printing technology express a structural form created by repetition. Second, it expresses a dynamic form, which combines organic curves that create an external volume. Third, it expresses a surrealistic form centered on an object with the creation of a unique shape that utilizes objects easily experienced in local surroundings. Fourth, it expresses a hybrid form on a partial derivation. Each of the other system's components are fused to create another beauty that develops a new value in a colorful variation on the shape of 3D printing shoes. The first formative characteristic of women's shoes designs that integrate 3D printing technology is continuity. This creates an invisible form of a new space through repetitive unidirectional layers with a gradual expansion of a unitary seamless curves. Second, it is an exaggeration. This exaggeration elicits an enormous aesthetic quality by structuring the outward space in the difference of the volume formed based on the maximization of a specific part and the volume of a line's atypical movement. Third, it is a decoration. It displays the beauty of a decoration that evokes a unique artistic inspiration by partial unification or a practical representation of a specific form. This can also be seen as superimposing a 3D printing figure that has an outstanding shape onto part of the fashion shoes. Fourth, it concerns a geometrical characteristic that formulates a new structure with rationality in combining basic shapes such as circles, triangles and squares with lines, hexagons and interconnected geometrical forms to create a multi-dimensional space for shoes in a systematic and unidirectional pattern.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• 제38권1호
• /
• pp.43-57
• /
• 2002

This paper introduces an analysis method to predicting the flow characteristic of flow field around otter board In order to develope a high performance model. In this experiment, it is used a numerical analysis of flow field through CFD(Computational Fluid Dynamic), PIV method in which quantitative, qualitative evaluation is possible. In this experiment, it is used PIV method with flow filed image around otter board in order to analysis of flow characteristic. The result compared flow pattern with analysis result through CFD and also measurement result of lift and drag force coefficient carried out in CWC(Circulating Water Channel). The numerical analysis result is matched well with experiment result of PIV in the research and it is able to verify In the physical aspect. The result is as follows ; (1) It was carried out visibility experiment using laser light sheet, and picture analysis through PIV method in order to analysis fluid field of otter-board. As a result, the tendency of qualitative fluid movement only through the fluid particle's flow could be known. (2) Since PIV analysis result is quantitative, this can be seen in velocity vector distributions, instantaneous streamline contour, and average vorticity distributions through various post processing method. As a result, the change of flow field could be confirmed. (3) At angle of attack 24$^{\circ}$ where It Is shown maximum spreading force coefficient, the analysis result of CFD and PIV had very similar flow pattern. In both case, at the otter-board post edge a little boundary layer separation was seen, but, generally they had a good flow (4) As the result of post processing with velocity vector distributions, instantaneous streamline contour and average vorticity distributions by PIV, boundary layer separation phenomenon started to happen from angle of attack 24$^{\circ}$, and from over angle of attack 28$^{\circ}$, it happen at leading edge side with the width enlarged.

• 한국해양학회지
• /
• 제30권6호
• /
• pp.565-583
• /
• 1995

We have used a nonlinear quasi-geostrophic model to study effects of lateral friction and bottom topography on the motion of warm eddies. The two empirical orthogonal functions of the stream function, accounting for the vertical structure, represent the barotropic and first baroclinic dynamic modes. This model is integrated 360 days on a 1000 km ${\times}$ 1000 km domain with a resolution of 10 km ${\times}$ 10 km including both the thermocline and idealized topography of the East Sea. Prescribed inflow through the Korea Strait is compensated by outflow through the Tsugaru Strait. The balance between the nonlinear advection term and the planetary ${\beta}$-effect tends to make northward movement of warm eddy over a flat bottom. The motion of a warm eddy over a sloping topography can be dominated by the nonlinear advection, while nonlinearity plays a secondary role over a flat topography. For eddies dispersing over topography, the nonlinear tendency is a function of time. For a strong warm eddy, northward propagation can occur. For intermediate strength of eddies one might expect a balance between the nonlinear term and the topographic ${\beta}$-effect. As nonlinearity decreases with eddy dispersion, southward motion along the slope may occur by such as a topographic Rossby wave. Our numerical simulations have confirmed the importance of lateral friction on eddy motions, in such a way that the northward penetration of the warm eddy increases drastically by the decrease of the lateral friction. The northward motion of warm eddy can be prevented by reducing the Reynolds number sufficiently. We have also demonstrated the crucial role of topographic effects in the eddy motion process.