• 한국정보기술응용학회:학술대회논문집
• /
• 한국정보기술응용학회 2005년도 6th 2005 International Conference on Computers, Communications and System
• /
• pp.147-151
• /
• 2005

CAN(Controller Area Network) is a simple and efficient network system for real time control and measurement. As it is not only good at error detection but also strong in electromagnetic interference, CAN has been widely used all over the industries. Basically, CAN needs a master node in charge of sensor data collection, node scheduling for data transmission to a monitoring system and error detection. According to the number of mater nodes, the CAN system is classified into two type of master system. One is a single master system that has only one master node and the other is a multi-master system where any sensor node can become a master node depending on the system's conditions. While it has the advantage of its fault tolerance, the multi-master system will suffer form the overall performance degradation when a defect is found in the master node. It is because all sensor nodes pertaining to a defective master node lose their position. Moreover, it is difficult and expensive to implement. For a single master system, the whole system will be broken down when a problem happens to a single master. In this paper, a dynamic master system is presented that there are several sub-master nodes of which basic functions are those of other sensor nodes at ordinary times but dynamically changed to replace the failing master node. An effective scheduling algorithm is also proposed to choose an appropriate node among sub-master nodes, where each sub-master node has its precedence value. The performance of the dynamic master system is experimented and analyzed.

• Nuclear Engineering and Technology
• /
• 제51권6호
• /
• pp.1540-1553
• /
• 2019

A nuclear power plant (NPP) is a highly complex system-of-systems as manifested through its internal systems interdependence. The negative impact of such interdependence was demonstrated through the 2011 Fukushima Daiichi nuclear disaster. As such, there is a critical need for new strategies to overcome the limitations of current risk assessment techniques (e.g. the use of static event and fault tree schemes), particularly through simulation of the nonlinear dynamic feedback mechanisms between the different NPP systems/components. As the first and key step towards developing an integrated NPP dynamic probabilistic risk assessment platform that can account for such feedback mechanisms, the current study adopts a system dynamics simulation approach to model the thermal dynamic processes in: the reactor core; the secondary coolant system; and the pressurized water reactor. The reactor core and secondary coolant system parameters used to develop system dynamics models are based on those of the Palo Verde Nuclear Generating Station. These three system dynamics models are subsequently validated, using results from published work, under different system perturbations including the change in reactivity, the steam valve coefficient, the primary coolant flow, and others. Moving forward, the developed system dynamics models can be integrated with other interacting processes within a NPP to form the basis of a dynamic system-level (systemic) risk assessment tool.

• 한국정밀공학회지
• /
• 제15권12호
• /
• pp.148-161
• /
• 1998

We investigate a design methodology for master arm which is employed in remote-site control. Though counter-balancing has been employed for the purpose of lessening the actuator loads, it results in the increase of dynamic load at the task position. Therefore, there exists a trade-off between counter-balancing and dynamic performance. The concept of a composite index is introduced to simultaneously consider those two effects in the design of master arms. Several alternative designs of master arms are suggested.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.168-172
• /
• 1996

In master-slave teleoperating system, it is important that the system has good maneuverability. In this paper, it is addressed an adaptive learning control method applicable to the master-slave system. This control scheme has the ability to estimate uncertain dynamic parameters included intrinsically in the system and to achieve the desired performance without the nasty matrix operation. The proposed method is applied to a master-slave teleoperating system composed of two SCARA robots and verified experimentally.

• 한국정밀공학회지
• /
• 제27권12호
• /
• pp.48-58
• /
• 2010

In this study, position tracking and force reflection control of a master-slave manipulator which will be used for handling objects contaminated by radioactivity has been addressed. Since available measurements concerning on dynamic motion of the master-slave manipulator are restricted, a simple constrained control structure was suggested. In the consideration of the uncertain dynamic behaviors of the slave manipulator which is dependent upon mass and shape of work pieces grasped and dynamic properties of the environment contacted, a simple structured sliding mode control was suggested to guarantee robustness with respect to parameter uncertainties and external disturbances. The proposed control was applied to a 1-DOF master-slave link system. The control performances were verified along with some computer simulation results.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2005년도 가을 학술발표논문집 Vol.32 No.2 (1)
• /
• pp.559-561
• /
• 2005

CAN(Controller Area Network)은 시스템이 간단하고 저렴하게 구현 할 수 있는 필드버스(Field bus)로써 1980년대 독일의 BOSCH사에 의해 자동차 제어용 네트워크로 개발되었고, 실시간 계측제어 능력이 우수하여 산업전반(산업 자동화, 건을 자동화, 의료 장비, 열차, 중장비 차량)에 사용되고 있다. 본 논문에서는 CAN의 단일 마스터 시스템(Single Master System)에서 마스터 노드에 문제가 발생할 때, 전체 시스템이 다운되는 현상을 악기 위해 마스터 노드를 동적으로 변화시키는 동적 마스터 시스템(Dynamic Master System)을 제안하고 기존의 시스템과 비교하여 시스템의 가용성을 알아보았다.

• 한국전문물리치료학회지
• /
• 제15권4호
• /
• pp.18-26
• /
• 2008

The present study was aimed at investigating the postural control ability of volleyball players with functional ankle instability. The subjects were 26 male volleyball players were divided into 2 groups (13 subjects with functional ankle instability and 13 subjects with ankle stability) who could evaluate Questionnaire. All the male participants were tested by a Balance Master System. This study were to measure of static balance ability, dynamic balance ability, motor function the difference between functional ankle instability group and control group. Ankle instability group and stable group in postural sway ($^{\circ}/sec$) on film surface with eye closed in modified clinical test sensory interaction on balance, and left unilateral stance with eye opened and closed were significantly different (p<.05). The ankle instability group and stable group in limit of stability were significantly different (p<.05). The ankle instability group and stable group in left/right rhythmic weight shirt were significantly different (p<.05). The ankle instability group and stable group in turn time (sec) & turn sway ($^{\circ}$) during step/quick turn and end sway ($^{\circ}/sec$) in tandem walk were significantly different (p<.05). This study showed that volleyball players with functional ankle in stability were effected postural control ability by static balance & dynamic balance ability. Further study is needed to measure various athletic with functional ankle instability for clinical application.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -1
• /
• pp.176-179
• /
• 2002

In recent years, an increasing amount of computer network research has focused on the problem of cluster system in order to achieve higher performance and lower cost. The load unbalance is the major defect that reduces performance of a cluster system that uses parallel program in a form of SPMD (Single Program Multiple Data). Also, the load unbalance is a problem of MPP (Massive Parallel Processors), and distributed system. The cluster system is a loosely-coupled distributed system, therefore, it has higher communication overhead than MPP. Dynamic load balancing can solve the load unbalance problem of cluster system and reduce its communication cost. The cluster systems considered in this paper consist of P heterogeneous nodes connected by a switch-based network. The master node can predict the average execution time of tasks for each slave node based on the information from the corresponding slave node. Then, the master node redistributes remaining tasks to each node considering the predicted execution time and the communication overhead for task migration. The proposed dynamic load balancing uses execution time prediction to optimize the task redistribution. The various performance factors such as node number, task number, and communication cost are considered to improve the performance of cluster system. From the simulation results, we verified the effectiveness of the proposed dynamic load balancing algorithm.

• The Journal of Korean Physical Therapy
• /
• 제16권3호
• /
• pp.112-124
• /
• 2004

Purpose : The purpose of this study is to research the effects of the differences in shoe heel height on balanced performances with a balance master. Method : 40 healthy female adults were divided into 2 groups at random. All the female participants were tested by a balance master system. Differences were analyzed according to high heel shoes and low heel shoes. The ability of static postural balance control was measured by modified CTSIB and unilateral stance test, while that of dynamic postural balance control was measured by LOS (limit of stability) and rhythmic weight shift, among the programs of a balance master. Result : 1. There is no significant correlation between the ability of static and dynamic postural balance control before main test without the shoes. 2. Movement velocity and directional control ability were significant correlation compared result of in high heel shoes and low heel shoes group. Conclusion : In conclusion, the test results of the high heeled shoe group and the low heeled shoe group through a balance master system showed that the former one is inferior to the latter one.

• 대한기계학회논문집A
• /
• 제25권8호
• /
• pp.1308-1316
• /
• 2001

A hybrid type master system is proposed to take the advantage of the link mechanism and magnetic levitation mechanism without using a force sensor. Two different types of electromagnetic actuators, moving coil type and moving magnet types are used to drive the master system which is capable of 4-DOF actuation. It is designed that the rotation motions about x-y axis are decoupled and the whole system is represented by simple dynamic equations. The force reflection is achieved by using the simple relation between the force and applied current and position. The simulation and experimental results are presented to show its performance.