• 한국물환경학회지
• /
• 제25권5호
• /
• pp.704-712
• /
• 2009

Advanced Phase Isolation Ditch (APID) process was studied to develop economic retrofitting technology, for the plants where retrofitting of common activated sludge process is required. In this study, to evaluate and monitor the effluent water quality ($BOD_5$, SS, T-N, and T-P) and operating conditions (Influent, SVI, SRT, and HRT) as process capable and stable parameters for treating municipal wastewater, a demonstration plant was installed and operated in the existing sewage treatment plant of P city. During this study, the average effluent $BOD_5$, SS, T-N, and T-P concentrations were 7.7, 5.6, 10.8, and 1.6 mg/L. Trend analysis of influent $BOD_5$, SS, T-N, and T-P in APID process were illustrated that APID process need for more strong APID process management on the winter session, such as developing new intermediated aeration mode, operating methods, and managements strategy. At the application of control chart, the signal of uncommon effects at APID process was determined much higher existing control chart tntr conventional control chart in this study. These results indicate that conventional control chart has been collected and determined cleary signal at only stable situation. Therefore, newly developed APID process of dynamic control chart can be one of the useful tool for monitoring and management process.

• 산업경영시스템학회지
• /
• 제17권30호
• /
• pp.107-116
• /
• 1994

This paper formulates a dynamic monitoring and control model with a machine state by quality variations in a single lot production system. A monitoring model is based on estimate of machine state obtained using control theory. The model studied in this paper has a great advance from a point of view the combination between quality control (Sampling, Control Chart) and automatic control theory, and can be extended in a several ways.

• 대한기계학회논문집
• /
• 제18권2호
• /
• pp.502-511
• /
• 1994

A video deck mechanism is composed of various cams, links, and gears, and it requires precise movement. So kinematic motion between parts should be considered to get desired movement depending on the timing chart which defines movement of each part to get desired mode. Also dynamic effects should be considered to get right tape tension and to estimate motor force required to obtain accurate motion. The design process of the deck mechanism of VCR is explained briefly. The loading block of the deck mechanism is divided into a tape translational group and a brake control group. Each group is modeled for kinematic and dynamic analysis. Finally, two groups are combined together to analyze the loading block of the deck mechanism. Results are used to understand and modify an existing design.

• 드라이브 ㆍ 컨트롤
• /
• 제20권1호
• /
• pp.27-33
• /
• 2023

From the perspective of dental chair manufacturers, it is important to of localizing hydraulic system in order to secure market competitiveness. This study aims to develop the analysis model of a dental chair which overseas companies secure core technologies. The study follows the steps below. First, the component parts of the solenoid valve unit of a foreign leading company are analyzed and implemented in virtual environment. Second, dynamic behavior scenario is established based on solenoid valve signal chart provided by a foreign leading company. The analysis model is verified and its performance is analyzed using dynamic behavior according to each scenario. Third, a simulation is carried out to determine whether the cylinder velocity of designed hydraulic system surpasses 1cm/s as required by the design.

• 한국해양공학회지
• /
• 제13권3B호
• /
• pp.106-115
• /
• 1999

Modeling a discrete event system such as a sequential control system is difficult compared with a continuous system. Petri nets have been introduced as an analyzing and design tool for the discrete systems. One of the problems in its applications is that the model can not be analyzed easily in the case of large scale or complicated systems because of increase of the number of components of the system. To overcome this problem, some methods for dividing or reducing Petri nets have been suggested. In this paper, an approach for a hierarchical expression of Petri nets based on Sequential Function Chart(SFC) is proposed. A measuring tank system will be described as a typical kind of discrete systems. The system is modeled by sub Petri nets based on SFC in order to analyze and visualize efficiently about the dynamic behaviors of the system. Some numerical simulations using state equations are performed to prove the validity of the proposed method.

• 응용통계연구
• /
• 제22권6호
• /
• pp.1191-1201
• /
• 2009

공정관리에서 작은 평균변화를 탐지하기 위하여 누적합 관리도를 사용하는 것이 일반적이다. 자기상관이 존재하는 공정의 경우 시계열 모형에 적합하여 구한 잔차를 관리도에 적용하는 모형기반 관리방법이 활용되고 있다. 그러나 공정에 일정한 크기의 지속적인 수준 변화가 발생하면 잔차에는 동적 평균변화의 패턴이 나타나게 되어 누적합 관리도의 탐지능력은 저하될 수 있다. 본 논문에서는 잔차에 등락을 반복하는 진동(oscillation) 특성의 동적 평균변화가 발생하는 ARMA(1,1) 모형을 대상으로, 그러한 변화를 효율적으로 탐지할 수 있는 새로운 OCUSUM 관리도를 제안하고 모의실험을 통해 최근에 소개된 기존의 CUSUM 관리도와 탐지능력을 비교하였다.

• 대한산업공학회지
• /
• 제32권3호
• /
• pp.210-218
• /
• 2006

Traditional statistical process control (SPC) applied to discrete part industry in the form of control charts can look for and eliminate assignable causes by process monitoring. On the other hand, engineering process control (EPC) applied to the process industry in the form of feedback control can maintain the process output on the target by continual adjustment of input variable. This study presents controlling and monitoring rules adopted by variable sampling interval (VSI) to change sampling intervals in a predetermined fashion on the predicted process levels under integrated EPC and SPC systems. Twelve rules classified by EPC schemes(MMSE, constrained PI, bounded or deadband adjustment policy) and type of sampling interval combined with EWMA chart of SPC are proposed under IMA (1,1) disturbance model and zero-order (responsive) dynamic system. Properties of twelve control rules under three patterns of process change (sudden shift, drift and random shift) are evaluated and discussed through simulation and control rules for integrated VSI EPC and SPC systems are recommended.

• Structural Engineering and Mechanics
• /
• 제81권5호
• /
• pp.647-664
• /
• 2022

The powerful data mapping capability of computational deep learning methods has been recently explored in academic works to develop strategies for structural health monitoring through appropriate characterization of dynamic responses. In many cases, these studies concern laboratory prototypes and finite element models to validate the proposed methodologies. Therefore, the present work aims to investigate the capability of a deep learning algorithm called Sparse Autoencoder (SAE) specifically focused on detecting structural alterations in real-case studies. The idea is to characterize the dynamic responses via SAE models and, subsequently, to detect the onset of abnormal behavior through the Shewhart T control chart, calculated with SAE extracted features. The anomaly detection approach is exemplified using data from the Z24 bridge, a classical benchmark, and data from the continuous monitoring of the San Vittore bell-tower, Italy. In both cases, the influence of temperature is also evaluated. The proposed approach achieved good performance, detecting structural changes even under temperature variations.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회/대한산업공학회 2005년도 춘계공동학술대회 발표논문
• /
• pp.723-729
• /
• 2005

Traditional statistical process control(SPC) applied to discrete part industry in the form of control charts can look for and eliminate assignable causes by process monitoring. On the other hand, engineering process control(EPC) applied to the process industry in the form of feedback control can maintain the process output on the target by continual adjustment of input variable. This study presents controlling and monitoring rules adopted variable sampling interval(VSI) to change sampling intervals in a predetermined fashion on the predicted process levels for integrated EPC and SPC systems. Twelve rules classified by EPC schemes(MMSE, constrained PI, bounded or deadband adjustment policy) and type of sampling interval combined with EWMA chart of SPC are proposed under IMA(1,1) disturbance model and zero-order (responsive) dynamic system. The properties of twelve control rules under three patterns of process change(sudden shift, drift and random shift) are evaluated and discussed through simulation and control rules for integrated VSI EPC and SPC systems are recommended.

• 대한기계학회논문집
• /
• 제15권6호
• /
• pp.1861-1871
• /
• 1991

본 연구에서는 아직까지 연구가 미진한 내용 즉, 유속과 압력이 시간과 위치 의 함수인 유동특성과 파이프의 운동이 상호 연계되어 영향을 주는 일반적인 경우의 운동방정식을 유도하였고 단순지지된 직선 파이프를 모델로 설정하여 동적 안정성 (dynamic stability)과 진동응답을 수치적으로 고찰하였다.