• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2001년도 춘계학술대회 논문집
• /
• pp.119-126
• /
• 2001

The potential pollution problems resulting from tanker collision necessitate the requirement for an effective structural design and the development of relevant safety regulation. During a few decades, the great effort has been made by International Maritime Organization and the Administration, etc, to reduce oil spillage from collision accidents. However there is still a need for investigation in the light of structural evaluation method for the experiments and rational analysis, and design development for an operational purpose of ships. This study is aimed at investigating a complicated structural response of bow structures of oil carriers for assessing the energy dissipation and crushing mechanics of striking vessel through a methodology of the numerical analysts for the various models and its design changes. Through this study an optimal bow construction absorbing great portion of kinetic energy in the least penetration depth prior to reach to the cargo area and an effective location of collision bulkhead are investigated. In order to obtain a rational results in this study, three stages of response analysis procedures are performed as follows; 1). 16 simplified ship models are used to investigate the structural response against bow collision with variation of primary and secondary members. Mass and speed are also varied in two conditions. 2). 21 models conisted of 5 size of full scaled oil carriers are used to perform the collision simulation with the various sizes and deadweight delivered in a recent which are complied with SOLAS and MARPOL. 3). 36 models of 100k oil carrier are used to investigate the structural response and its influence to the collision bulkhead against bow collision in variation with location of collision bulkhead, primary mombers, framing system and colliding conditions, etc.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제10권3호
• /
• pp.367-375
• /
• 2018

The present paper considers the contact between energy-saving device of ice-class vessel and ice block. The main objective of this study is to clarify the tendency of the ice impact force and the structural response as well as interaction effects of them. The contact analysis is performed by using LS-DYNA finite element code. The main collision scenario is based on Finnish-Swedish ice class rules and a stern duct model is used as an energy-saving device. For the contact force, two modelling approaches are adopted. One is dynamic indentation model of ice block based on the pressure-area curve. The other is numerical material modelling by LS-DYNA. The authors investigated the sensitivity of the structural response against the ice contact pressure, the interaction effect between structure and ice block, and the influence of eccentric collision. The results of these simulations are presented and discussed with respect to structural safety.

• 한국통신학회논문지
• /
• 제28권1B호
• /
• pp.11-17
• /
• 2003

본 논문에서는 ETSI(European Telecommunication Standards Institute)에서 표준화 작업중인 HIPERLAN/2(HIgh PErformance Radio Local Area Network/2)의 성능 향상을 위하여, 우선순위기반 스케쥴링 방식 하에서의 동적 랜덤접속채널 할당방법을 제안하였다 제안한 방식은 AP(Access Point)에서 자원을 할당 할시 충돌단말에게 우선적으로 자원을 할당함으로써, 결과적으로 충돌단말의 전체전송지연을 줄여준다. 동적 랜덤접속채널 할당 방법은 트래픽 부하가 적을 때는 랜덤접속채널 수를 증가시킴으로 충돌확률을 줄여서 많은 단말들이 자원을 할당받도록 하며, 부하가 많을 때는 랜덤접속채널 수를 적게 설정하여 데이터 전송채널을 증가시킴으로써 처리율을 증가시키고 스케줄링 지연을 감소시켜 성능을 향상시킨다 표준안을 근거로 제안된 방법을 성능평가 하였을 경우, 매체접근제어 프로토콜의 처리율 및 전송지연이 성능 향상됨을 확인하였다.

• 한국생산제조학회지
• /
• 제7권4호
• /
• pp.28-34
• /
• 1998

This paper presents a new method for local obstacle avoidance of indoor mobile robots. The method combines a directional approach called the lane method and a velocity space approach. The lane method divides working area into lanes and then chooses the best lane to follow for efficient and collision-free movement. Then, the heading direction to enter and follow the best lane is decided, and translational and rotational velocity considering physical limitations of a mobile robot are determined. Since this method combines both the directional and velocity space method, it shows collision-free motion as well as smooth motion taking the dynamic of the robot into account.

• 해양환경안전학회지
• /
• 제24권1호
• /
• pp.36-42
• /
• 2018

이 연구는 운항자가 항해 중 위험을 느끼는 고정 및 이동 물표에 대한 해상교통위험성평가에 대한 것이다. 이를 위해 선박 길이와 속력, 선박조종성능이 고려된 동적선박영역을 기초로 한 충돌위험평가식을 구하였다. 특히, 동적선박영역과 충돌위험평가식을 하이브리드 결합하여 자선의 크기, 속력 등의 영향을 정량적으로 지표화한 항해위험성평가모델을 검토 및 개선하고자 한 것이다. 기존 항해위험성평가 모델에 적용이 부족한 속장비(speed length ratio) 즉, 선박의 길이와 속력에 대한 비가 고려된 새로운 형태의 해상교통위험성평가 모델을 제안하고자 한다. 그 결과 무차원 속력 즉, 속장비가 클수록 CJ 값이 크며, CJ 값은 속장비에 의해 잘 표현되고 있다. 또한, 속장비가 크면 속장비가 작은 경우보다, 보다 먼 거리에서부터 [주의], [경계], [위험] 또는 [매우위험]상태에 도달한다. 이 연구의 결과는 위험항로 회피 또는 최적항로 구축, 방파제폭이나 교량경간 등을 포함한 항로나 항만개발, 연안항해용 안전해도 개발 및 향후 자율운항선박과 같은 스마트선박의 운항 중 충돌방지와 최적항로 선정에 자료로 사용될 수 있을 것이다.

• 한국통신학회논문지
• /
• 제27권7B호
• /
• pp.706-718
• /
• 2002

In bluetooth system, there are two kinds of interference. One is the frequency static interference, for example 802.11 direct sequence, the interferer uses fixed frequency band. Another is frequency dynamic interference, for example other piconets or 802.11 frequency hopping, the interferer uses dynamic frequency channel and cant be estimated. In this paper we introduce a novel solution of hybrid method of Listen-Before-Talk (LBT) and Adaptive Frequency Hopping (AFH) to address the coexistence of bluetooth and Direct Sequence of wireless local area network (WLAN). Before any bluetooth packet transmission, in the turn around time of the current slot, both the sender and receiver sense the channel whether there is any transmission going on or not. If the channel is busy, packet transmission is withdrawn until another chance. This is the LBT in Bluetooth. Because of asymmetry sense ability of WLAN and bluetooth, AFH is introduced to combat the left front-edge packet collisions. In monitor period of AFH, LBT is performed to label the channels with static interference. Then, all the labeled noisy channels are not used in the followed bluetooth frequency hopping. In this way, both the frequency dynamic and frequency static interference are effectively mitigated. We evaluate the solution through packet collision analysis and a detail realistic simulation with IP traffic. It turns out that the hybrid method can combat both the frequency dynamic and frequency static interference. The packet collision analysis shows it almost doubles the maximal system aggregate throughput. The realistic simulation shows it has the least packet loss.

• 수산해양교육연구
• /
• 제29권1호
• /
• pp.201-208
• /
• 2017

The major cause of the marine accidents is the collision with a moving object such as ship as well as the fixed object such as breakwater. Therefore, the most effective way to reduce the maritime ship accidents is the prevention of collision. In order to decrease the collision, it is principle that the navigation officer promptly judges the dangerous condition and makes the quick response. The ship does not allow any object or other ships approaching its surrounded area called ship area so that it prevents the collision. Generally, the ship which has high speed or poor maneuvering capability shall be managed from the distance so that the other ship does not invade its ship domains(watching distance, blocking distance). Accordingly, this study sets the navigational risk assessment model by applying ship dynamic domain and collision judgement method considered ship length, speed and navigational capability. It also reviewed the validity of the model and evaluated the perilous water way (Maenggol Channel) and a curved route near Maenggol Channel. As a result, in case of a ship with 100m in length passing Maenggol Channel, it represented "warning" level before 1.5nm to the entry, "dangerous"level 0.75nm before to it and "very dangerous" level 0.5nm before to it and then "dangerous"level again up to the entry. Applying to the curved route also showed the same results as the Narrow Channel or Maenggol Channel. This analysis highly matched with the actual navigation results. In the future, this model will be useful for coastal navigation safety chart development and safety evaluation for route or port development. It also allows to evaluate the dangerous route or the best route by applying the result into ECDIS so that it will finally help to reduce the marine accidents. Eventually the model will be effective for the marine traffic simulation evaluation forced by Maritime Traffic Safety Act.

• 전자공학회논문지S
• /
• 제34S권10호
• /
• pp.59-70
• /
• 1997

Until now, considerable progress has been made in the application of range finding techanique performing direct 3-D measurement from the object. However, ther are few use of the method in the area of the application of material handing. We present a range finding vision system consisting of static and dynamic range finders to automate a reclaimer used for material handling. A static range finder detects range data of the front part of the piles of material, and a height map is obtained from the proposed image processing algorithm. The height map is used to calculate the optimal job path as features for required information for material handling function. A dynamic range finder attached on the side of the arm of the reclaimer detects the change of the local properties of the material with the handling function, which is used for avoiding collision and detecting the ending point for changing direction. the developed vision systm was applied to a 1/20 simulator and the results of test show that it is appropriate to use for automating the material handling.

• 수산해양교육연구
• /
• 제28권6호
• /
• pp.1812-1821
• /
• 2016

The purpose of this study is to survey input data error of ship automatic identification system (AIS) and suggest its improvement. The effects of AIS were observed. Input data error of AIS was investigated by dividing it into dynamic data, static data by targeting actual ships and its improvement method was suggested. The findings are as follows. Looking into accidents before and after AIS is enforced to install on the ship, total collision were decreased after AIS installed. Static data error of AIS took place mainly in the case that ship name, call sign, MMSI, IMO number, ship type, location of antenna (ship length and width) were wrongly input or those data were not input initially. Dynamic data error of AIS was represented by input error of ship's heading. As errors of voyage related data take place as well, confusion is made in sailing or ship condition. Counter measures against the above are as follows. First, reliability of AIS data information should be improved. Second, incessant concern and management should be made on the navigation officers.

• 한국항공우주학회지
• /
• 제43권10호
• /
• pp.888-895
• /
• 2015

본 논문에서는 한국형 기동헬기의 안전영역 검증을 위해 블레이드 플래핑 각을 산출할 수 있는 근사식을 제시하였다. 블레이드의 플래핑 운동은 항공기 동체와의 충돌을 일으킬 수 있기 때문에 안전성 측면에서 검증되어야 하지만 비행 중의 플래핑 각을 정확하게 예측하거나 측정하는 것은 어려움이 있다. 이에 따라 공력이론을 활용한 코닝 각 예측 식과 개발해석결과를 활용한 동적 플래핑 각 예측 식을 도출하였다. 이 후 항공기 모사시험을 실시하여 식을 이용한 플래핑 각과 실측된 플래핑 각을 비교하여 산출식의 적절성을 확인하였다. 최종적으로 산출된 식을 이용하여 AC29 및 FAR29를 바탕으로 안전성 측면에서 검증이 요구되는 기동의 플래핑 각을 산출하여 개발에서 설정된 항공기 안전영역의 적절성을 확인하였다.