• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.10a
• /
• pp.121-124
• /
• 2001

Dynamic Source Route(DSR) protocol is a simple and efficient routing protocol designed specially for use of the multi-hop Ad Hoc Network. DSR allows the network to be completely self-organized and self-configured without the need for any existing infrastructure or administration. DSR protocol consists of the two mechanisms of Router discovery and Router Maintenance, works entirely On-demand in all aspects. In this paper, we will present the performance of DSR protocol on the multi-hop wireless Ad Hoc Networks, illustrate it with simulation, and then analysis the algorism of DSR.

• Journal of Information Technology Services
• /
• v.6 no.1
• /
• pp.141-149
• /
• 2007

Sensor node's mobility brings new challenges to data dissemination in large sensor networks. Frequent location updates of sensor nodes can lead to both excessive drain of sensor's limited battery supply and increased collisions in wireless transmissions. Conventional studies for routing protocols in wireless sensor networks are not enough to cover energy consumption and migration of sensor nodes. This study proposes a dynamic routing protocol based on the SPIN considering energy consumption and the migration, and also shows the effectiveness of the proposed routing protocol.

• International Journal of Computer Science & Network Security
• /
• v.21 no.12
• /
• pp.1-8
• /
• 2021

In Mobile Ad-Hoc Network (MANET) Application, routing protocol is essential to ensure successful data transmission to all nodes. Ad-hoc On-demand Distance Vector (AODV) Protocol is a reactive routing protocol that is mostly used in MANET applications. However, the protocol causes Route Request (RREQ) message flooding issue due to the broadcasting method at the route request stage to find a path to a particular destination, where the RREQ will be rebroadcast if no Request Response (RREP) message is received. A scalable neighbor-based routing (SNBR) protocol was then proposed to overcome the issue. In the SNBR protocol, the RREQ message is only rebroadcast if the number of neighbor nodes less than a certain fix number, known as drop factor. However, since a network always have a dynamic characteristic with a dynamic number of neighbor nodes, the fix drop factor in SNBR protocol could not provide an optimal flooding problem solution in a low dense network environment, where the RREQ message is continuously rebroadcast RREQ message until reach the fix drop factor. To overcome this problem, a new broadcasting method as Dynamic SNBR (DSNBR) is proposed, where the drop factor is determined based on current number of neighbor nodes. This method rebroadcast the extra RREQ messages based on the determined dynamic drop factor. The performance of the proposed DSNBR is evaluated using NS2 and compared with the performance of the existing protocol; AODV and SNBR. Simulation results show that the new routing protocol reduces the routing request overhead, energy consumption, MAC Collision and enhances end-to-end delay, network coverage ratio as a result of reducing the extra route request messages.

• Journal of the Korea Society of Computer and Information
• /
• v.11 no.1 s.39
• /
• pp.195-201
• /
• 2006

This thesis proposes hybrid routing protocol that mix proactive routing protocol and reactive routing protocol used in Ad hoc network. Proposed method is that establish special node offering network service of nods which construct Ad hoc network and do routing different from existing hybrid routing protocol, ZRP. Special node doing these parts is called C-node. Routing using C-node can accompany efficient routing by decreasing path institution time and flooding time than existing routing protocol.

• The KIPS Transactions:PartC
• /
• v.12C no.1 s.97
• /
• pp.111-120
• /
• 2005

A mobile ad-hoc network is an autonomous system of mobile nodes which are free to move around randomly and organize themselves arbitrarily, hence a routing protocol that handles the dynamic network topology changes is required for the network. In this paper we present a multi -Path on-demand routing protocol called R-DSR (Robust Dynamic Source Routing), an extension to the existing IETF protocol DSR. The proposed protocol has it that every pair of 2-hop away nodes on the single route is additionally connected via an alternative node. Throughout mathematical analysis we show the proposed protocol reveals higher message delivery rate than that of the Das's multi-path protocol, currently known as one of the most typical approaches related to DSR.

• Journal of the Korea Computer Industry Society
• /
• v.2 no.9
• /
• pp.1209-1218
• /
• 2001

In this dissertation, we propose a dynamic source routing protocol supporting asymmetric path for mobile ad hoc networks. At present, the existing dynamic source routing protocol supports only symmetric path for routing. However, in fact, there can exist unidirectional links due to asymmetric property of mobile termenals or current wireless environment. Thus, we implement a mobile ad hoc routing protocol supporting asymmetric routing path, which is fit for more general wireless environment. Especially, the proposed protocol uses an improved multipath maintenance method in order to perform rapid route reconfiguration when route error due to mobility is detected.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.1 no.1
• /
• pp.8-13
• /
• 2006

In mobile ad hoc networks, most of on demand routing protocols such as DSR and AODV do not deal with traffic load during the route discovery procedure. To achieve load balancing in networks, many protocols have been proposed. However, existing load balancing schemes do not consider the remaining available buffer size of the interface queue, which still results in buffer overflows by congestion in a certain node which has the least available buffer size in the route. To solve this problem, we propose a load balancing protocol called Dynamic Congestion Aware Routing Protocol (DCAR) which monitors the remaining buffer length of all nodes in routes and excludes a certain congested node during the route discovery procedure. We also propose two buffer threshold values to select an optimal route selection metric between the traffic load and the minimum hop count. Through simulation study, we compare DCAR with other on demand routing protocols and show that the proposed protocol is more efficient when a network is heavily loaded.

• Journal of Communications and Networks
• /
• v.15 no.4
• /
• pp.422-429
• /
• 2013

Advances in wireless sensor network (WSN) technology have enabled small and low-cost sensors with the capability of sensing various types of physical and environmental conditions, data processing, and wireless communication. In the WSN, the sensor nodes have a limited transmission range and their processing and storage capabilities as well as their energy resources are limited. A triple umpiring system has already been proved for its better performance in WSNs. The clustering technique is effective in prolonging the lifetime of the WSN. In this study, we have modified the ad-hoc on demand distance vector routing by incorporating signal-to-noise ratio (SNR) based dynamic clustering. The proposed scheme, which is an efficient and secure routing protocol for wireless sensor networks through SNR-based dynamic clustering (ESRPSDC) mechanisms, can partition the nodes into clusters and select the cluster head (CH) among the nodes based on the energy, and non CH nodes join with a specific CH based on the SNR values. Error recovery has been implemented during the inter-cluster routing in order to avoid end-to-end error recovery. Security has been achieved by isolating the malicious nodes using sink-based routing pattern analysis. Extensive investigation studies using a global mobile simulator have shown that this hybrid ESRP significantly improves the energy efficiency and packet reception rate as compared with the SNR unaware routing algorithms such as the low energy aware adaptive clustering hierarchy and power efficient gathering in sensor information systems.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2004.05a
• /
• pp.1609-1612
• /
• 2004

Ad hoc network is a kind of new wireless network paradigm for mobile hosts. Ad Hoc wireless networks consist of wireless mobile hosts forming a temporary network without the aid of any established infrastructure or centralized administration. Mobile hosts rely on each other to keep the network connected. Each host is not only mobile hosts but also router. So how to design a routing protocol is the most important problem. Dynamic source routing is a kind of routing protocol. In this paper we suggest a new automatic route shortening method and an energy-aware routing mechanism based on DSR.

• Journal of information and communication convergence engineering
• /
• v.5 no.3
• /
• pp.209-214
• /
• 2007

In this paper, we proposed a new MANET (Mobile Ad hoc Networks) technology of routing protocol. The MANET has a mobility formation of mobile nodes in the wireless networks. Wireless network have two types architecture: the Tree based multicast and shared tree based. The two kind's architecture of general wireless networks have difficult to solve the problems existing in the network, such as connectivity, safety, and reliability. For this purpose, as using that ADDMRP (Ad hoc network Doppler effect-based for Dynamic Multicast Routing Protocol), this study gives the following suggestion for new topology through network durability and Omni-directional information. The proposed architectures have considered the mobility location, mobility time, density, velocity and simultaneous using node by Doppler effects and improved the performance.