• 한국통신학회논문지
• /
• 제28권7B호
• /
• pp.628-637
• /
• 2003

본 논문에서는 VBR로 부호화된 복수 개의 지면 민감 서비스를 고속 망으로 제공하기 위한 새로운 다중화 방식을 제안한다. 본 논문의 주된 목표는 다중화 되는 각 비트 스트림에 부여되는 지연 제한 조건을 유지하고 또한 다중화되어 전송될 때 망 자원의 이용률을 개선하는데 있다. 이와 같은 목표를 위해, 각 비트 스트림에 부여된 지연 조건을 만족시키는 동적인 알고리즘을 제안한다. 제안된 알고리즘은 각 비트 스트림의 상관 관계가 매우 높다고 가정을 하고, 이 가정을 바탕으로 스트림 단위의 시간적 평균화와 동시에 다중화되는 복수 개의 스트림 간에 공간적인 다중화 효과를 이용한다. 본 논문에서 제안된 방식은 모의 실험을 통하여 첨두율과 시변화 계수에 있어서 뛰어난 성능을 보임을 확인할 수 있다.

• 스마트미디어저널
• /
• 제4권3호
• /
• pp.9-15
• /
• 2015

퍼브/서브 시스템(Pub/Sub System)은 시스템에서 발행되는 정보 중 사용자가 등록한 관심 정보만을 사용자에게 전달해주는 시스템이다. 기존의 퍼브/서브 시스템은 컨텐트의 저장 및 전달을 담당하는 브로커들을 네트워크화 하여 구현되었다. 모바일 사용자가 급증함에 따라 사용자의 관심위치 정보와 같은 지속적으로 변하게 되는 관심정보를 다루기 위한 퍼브/서브 시스템에 대한 수요가 부각 되고 있다. 이 논문에서는 기존의 퍼브/서브 시스템에서 깊이 고려하지 않았던, 관심 위치 정보의 빈번한 변화를 효과적으로 처리하기 위한 브로커 네트워크 기반의 퍼브/서브 시스템을 제안한다. 사용자의 행동 패턴이나 지리적 특성을 고려해 퍼브/서브 시스템에서 관리하는 공간 데이터 영역을 Slow Moving Region과 Normal Moving Region의 두가지 타입으로 구분하고, 각 영역에 대한 사용자의 요청을 효과적으로 지원하기 위해 Q+R트리를 사용하여 브로커를 관리한다. 시뮬레이션을 사용한 실험 결과를 통해 제안하는 Q+R트리 기반의 브로커 네트워크가 불필요한 브로커의 로드와 네트워크 트래픽을 감소시킴으로써 보다 효과적으로 지속적인 사용자의 관심 위치 정보 변화를 지원할 수 있음을 확인하였다.

• 한국농공학회논문집
• /
• 제59권6호
• /
• pp.89-100
• /
• 2017

The Agricultural Policy/Environmental eXtender (APEX) model was developed to extend EPIC's capabilities of simulating land management impacts for small-medium watershed and heterogeneous farms. APEX is a flexible and dynamic tool that is capable of simulating a wide array of management practices, cropping systems, and other land uses across a broad range of agricultural landscapes. APEX have its own agricultural environmental database including operation schedule, soil property, and weather data etc., by crops. However, agriculture environmental informations the APEX model has is all based on U.S. As this can cause malfunction or improper simulation while simulating highland field. In this study, database for APEX model to be utilized for South Korea established with 44,814 agriculture fields in Pyeongchang-gun, Korea from 2007 to 2016. And assessed domestic applicability by comparing T-P unit load criteria presented by National Institution of Environmental Research and result of APEX model. As a result of APEX model simulation, average T-P value for decade was 6.18. Average T-P of every year except 2011 was in range of 5.37~10.43 and this is being involved into criteria presented by National Institution of Environmental Research. It is analyzed that adjusting slope factor can make the model applicable for domestic agricultural environment.

• 한국도로학회논문집
• /
• 제15권5호
• /
• pp.47-55
• /
• 2013

PURPOSES : The purpose of this study is to investigate the optimal joint positions which can minimize distresses of concrete pavement containing box culvert with horizontally skewed angles. METHODS : The concrete pavement containing the box culvert with different skewed angles and soil cover depths was modeled by 3 dimensional finite element method. The contact boundary condition was used between concrete and soil structures in addition to the nonlinear material property of soil in the finite element model. A dynamic analysis was performed by applying the self weight of pavement, negative temperature gradient of slab, and moving vehicle load simultaneously. RESULTS : In case of zero skewed angle ($0^{\circ}$), the maximum tensile stress of slab was the lowest when the joint was positioned directly over side of box culvert. In case there was a skewed angle, the maximum tensile stress of slab was the lowest when the joint passed the intersection between side of the box culvert and longitudinal centerline of slab. The magnitude of the maximum tensile stress converged to a constant value regardless the joint position from 3m of soil cover depth at all of the horizontally skewed angles. CONCLUSIONS : More reasonable and accurate design of the concrete pavement containing the box culvert can be possible based on the research results.

• 한국재료학회지
• /
• 제27권6호
• /
• pp.331-338
• /
• 2017

This study was carried out to investigate the optimum condition of a friction stir welding process for a joint of AA2219-T87 and AA2195-T8 dissimilar aluminum alloys. These alloys are known to have good cryogenic properties, and as such to be suitable for use in fuel tanks of space vehicles. The welding parameters include the travelling speed, rotation speed and rotation direction of the tool. The experiment was conducted under conditions in which the travelling speed of the tool was 120-300 mm/min and the rotation speed of the tool was 400-800 rpm. To investigate the effect of the rotation direction of the tool, the joining was performed by switching the positions of the two dissimilar alloys. After welding, the microstructure was observed and the micro-hardness were measured; non-destructive evaluation was carried out to perform tensile tests on defect-free specimens. The result was that the microstructure of the weld joint underwent dynamic recrystallization due to sufficient deformation and frictional heat. The travelling speed of the tool had little effect on the properties of the joint, but the properties of the joint varied with the rotation speed of the tool. The conditions for the best joining properties were 600 rpm and 180-240 mm/min when the AA2219-T8 alloy was on the retreating side(RS).

• 한국정밀공학회지
• /
• 제26권9호
• /
• pp.72-80
• /
• 2009

When the magnet wheel rotates over a conducting plate, it generates the traction torque as well as the repulsive force on the conducting plate. Partially-cut traction torque results in the linear force into the tangential direction. To cut the traction torque, the concept of magnetic shield is introduced. The direction change of the linear force is realized varying the shielded area of magnetic field. That is, the tangential direction of non-shielded open area becomes the direction of the linear thrust force. Specially a shape of permanent magnets composing the magnet wheel leads to various pattern of magnetic forces. So, to enlarge the resulting force density and compensate its servo property a few simulations are performed under various conditions such as repeated pattern, pole number, radial width of permanent magnets, including shape of open area. The theoretical model of the magnet wheel is derived using air-gap field analysis of linear induction motor, compared with test result and the sensitivity analysis for its parameter change is performed using common tool; MAXWELL. Using two-axial wheel set-up, the tracking motion is tested for a copper plate with its normal motion constrained and its result is given. In conclusion, it is estimated that the magnet wheel using partial shield can be applied to a noncontact conveyance of the conducting plate.

• 한국도로학회논문집
• /
• 제1권2호
• /
• pp.121-133
• /
• 1999

본 논문은 국내 정유사에서 생산되는 도로 포장용 아스팔트에 대하여 노화에 따른 거동 특성을 파악하였다. 이를 위해 국내의 5개 정유회사에 생산되는 두가지 등급의 아스팔트 제품(침입도 85-100, 침입도 60-70)을 포함한 총 9종에 대하여 노화 단계별(노화 이전, 단기노화, 장기노화)로 국내 스트레이트 아스팔트의 침입도$(25^{\circ}C)$, 점도$(50^{\circ}C\;135^{\circ}C)$, 연화점, 및 DSR 시험$(-20^{\circ}C\sim30^{\circ}C)$을 수행하여, 아스팔트의 물성 변화 특성을 고찰하였다. 연구 결과, 국내 스트레이트 아스팔트의 거동은 고온($60^{\circ}C$근방) 및 상온$(10-30^{\circ}C)$범위에서 정유사 제품에 따라 상당한 차이를 나타내었으며, 저온의 경우에는 정유사 제품이나 등급에 관계없이 거의 유사한 거동을 나타내었다. 따라서 어느 정유사의 아스팔트를 사용하는가에 따라, 저온에서의 온도 균열에 대한 저항성은 다소 비슷한 수준일 것으로 판단되지만, 소성변형 및 피로 균열에 대한 저항성이 상이하게 나타날 것으로 판단된다.

• 한국재료학회지
• /
• 제21권12호
• /
• pp.644-649
• /
• 2011

[ $A_{3-2x/3}Al_{1-z}In_{z}O_4F:Eu_x^{3+}$ ](A = Ca, Sr, Ba, x = -0.15, z = 0, 0.1) oxyfluoride phosphors were simply prepared by the solid-state method at $1050^{\circ}C$ in air. The phosphors had the bright red photoluminescence (PL) spectra of an $A_{3-2x/3}Al_{1-z}In_{z}O_4F$ for $Eu^{3+}$ activator. X-ray diffraction (XRD) patterns of the obtained red phosphors were exhibited for indexing peak positions and calculating unit-cell parameters. Dynamic excitation and emission spectra of $Eu^{3+}$ activated red oxyfluoride phosphors were clearly monitored. Red and blue shifts gradually occurred in the emission spectra of $Eu^{3+}$ activated $A_3AlO_4F$ oxyfluoride phosphors when $Sr^{2+}$ by $Ca^{2+}$ and $Ba^{2+}$ ions were substituted, respectively. The concentration quenching as a function of $Eu^{3+}$ contents in $A_{3-2x/3}AlO_4F:Eu^{3+}$ (A = Ca, Sr, Ba) was measured. The interesting behaviors of defect-induced $A_{3-2x/3}Al_{1-z}In_{z}O_{4-{\alpha}}F_{1-{\delta}}$ phosphors with $Eu^{3+}$ activator are discussed based on PL spectra and CIE coordinates. Substituting $In^{3+}$ into the $Al^{3+}$ position in the $A_{3-2x/3}AlO_4F:Eu^{3+}$ oxyfluorides resulted in the relative intensity of the red emitted phosphors noticeably increasing by seven times.

• 대한기계학회논문집A
• /
• 제37권12호
• /
• pp.1529-1534
• /
• 2013

전자기력을 이용한 소형 회전 무빙 자석 타입 보이스 코일 구동기를 소형 이동 로봇을 위해 개발하였다. 1개의 자석과 1개의 코일 그리고 1개의 요크로 이루어진 간단한 구조이다. DC 모터와 같이 선형으로 근사화한 이론적인 모델링으로 성능을 예측하였고, 유한 요소 해석 프로그램으로 모터 상수와 복원력 상수를 계산하여 자석과 코일 사이의 공극에 따른 성능을 예측하였다. 시작품을 제작하여 실험을 통하여 60Hz 에서 공진 주파수를 가지고 주파수 대역폭이 80Hz를 가짐을 확인하여 모델링을 검증하였다. 그리고 정적으로 1.5V 입력 전압으로 약 20 deg의 회전을 확인하였다. 제안된 구동기는 개루프 제어가 가능하여 회로 구성을 간단히 할 수 있다.

• 한국소음진동공학회논문집
• /
• 제20권7호
• /
• pp.651-657
• /
• 2010

Previous experimental results performed by many researchers for a couple of decades in South Korea have shown that an absorbing sheet inserted in a conventional floating slab system for thermal insulation or vibration absorption may amplify the vibration of the slab system at specific frequency ranges depending on the material properties of the sheet. The amplified vibration, consequently, results in the heavy weight floor impact noise exceeding the sound level limit for an apartment house, 50 dB. In this study, the amplification mechanism is examined through numerical analysis and a new slab system is proposed to reduce the amplification and control the noise. The new slab system consists of studs connecting the base slab and upper concrete finishing yielding the dramatically increased stiffness of the slab. The numerical simulation is performed to investigate the effect of the slab system with studs on the vibration and noise control. The results show that the performance of the slab is sensitive to the number and location of studs, and the heavy weight floor impact noise can be reduced up to 6~7 dB compared to the conventional slab system at the optimal stud location.