• Journal of KIISE
• /
• v.44 no.10
• /
• pp.1062-1070
• /
• 2017

Real-time transmission studies in wireless sensor networks propose a mechanism that exploits a node that has a higher delivery speed than the desired delivery speed in order to satisfy real-time requirement. The desired delivery speed cannot guarantee real-time transmission in a congested area in which none of the nodes satisfy the requirement in one hop because the desired delivery speed is fixed until the packet reaches the sink. The feature of this mechanism means that the packet delivery speed increases more than the desired delivery speed as the packet approaches closer to the sink node. That is, the packet can reach the sink node earlier than the desired time. This paper proposes an improved real-time transmission by controlling the delivery speed using the temporal gain which occurs on the packet delivery process. Using the received data from a previous node, a sending node calculates the speed to select the next delivery node. The node then sends a packet to a node that has a higher delivery speed than the recalculated speed. Simulation results show that the proposed mechanism in terms of the real-time transmission success ratio is superior to the existing mechanisms.

• Journal of the Korea Computer Industry Society
• /
• v.5 no.3
• /
• pp.393-404
• /
• 2004

Recently, public home have used a more than two computer connected with network, and several home appliances using independently with internet or network are developing to be related closely with the network. Therefore, the home utilized for a simple terminal of the global network in the past is being expanded to another part of the sub network. For a variety of connecting home-area protocols with the existing existing network, we require a new Residential Gateway(RG) that does not only make the home-area network operating in the sub network but also connects to the external network. In this paper, RG has intrinsic limits against flexible service due to IP address assignment and hardware capacity. In order to solve this problem in the RG, we propose a Management Server(MS). The MS that offers the integrated managements and control services for a variety of devices connected the RG in the home-area. It can not only solve the dynamic IP address assigning problem but also assigns private IP addresses to the home network devices through the Network Address Translation(NAT). It also provides somewhat useful functions for the home network and the RG for other additional services. <중략> The MS is using a SNMP protocol for managing the RG in the domain, a polling method of the MS and the RG compose a sequence polling method, a polling method using a multi-process and a multi-thread. In this paper, we introduce a problem with polling method separately, show a polling method between the MS and the RG using a multi-thread.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.8
• /
• pp.1119-1127
• /
• 2010

In this paper, the design and nonlinear simulation of a multistable electromagnetic microactuator, which provides four stable equilibrium positions within its operating range, have been discussed. Quadstable actuator motion has been made possible by using both X- and Y-directional bistable structures with snapping curved beams. Two pairs of the curved beams are attached to an inner frame in both X- and Y-directions to realize independent bistable behavior in each direction. For the actuation of the actuator at the micrometer scale, an electromagnetic actuation method in which Lorentz force is taken into consideration was used. By using this method, micrometer-stroke quadstability in a plane parallel to a substrate was possible. The feasibility of designing an actuator that can realize quadstable motion by using the electromagnetic actuation method has been thoroughly clarified by performing nonlinear static and dynamic analyses and electrothermal coupled-field analysis of the multistable microactuator.

• Korean Journal of Agricultural Science
• /
• v.13 no.1
• /
• pp.113-122
• /
• 1986

In order to promote mechanization of corn harvesting in Korea, this study was conducted to find out the effect of moisture content on compressive properties such as force, deformation, energy and modulus of stiffness to the bioyield and the rupture point for Korean corn kernel. In this study, the loading positions of corn were flat, edge, longitude and the moisture contents were about 13, 17, 21, 25% in wet basis. The compression test was carreied out with flat plate by use of dynamic straingage for three varieties of Korean corn under quasi-static force when the loading rate was 1.125mm/min. The results of this study are summarized as follows; 1. When the moisture content of corn ranged from 12.5 to 24.5 percent, at flat position, the bioyied force was in the range of 13.63-26.73 kg and the maximum compressive strength was in the range of 21.55-47.65kg. Their values were reached minimum at about 17% and maximum at about 21% moisture content. The bioyield force was in the range of 13.58-6.70kg at edge position and the maximum compressive strength which was 16.42 to 7.82kg at edge position was lower than that which was 18.55-9.05kg at longitudinal position. 2. Deformation of corn varied from 0.43 to 1.37 mm at bioyield point and from 0.70 to 2.66mm at rupture point between 12.5 to 24.5% moisture content. As the moisture content increased, deformation was increased. 3. The moduli of resilience and toughness of corn ranged from 2.60 to 8.57kg. mm and from 6.41 to 34.36kg. mm when the moisture content ranged from 12.5 to 24.5 percent, respectively. As the moisture content increased, the modulus of toughness was increased at edge position and decreased at longitudinal position. And their values were equal each other at 22-23% moisture content. 4. The modulus of stiffness was decreased with increase in the moisture content. Its values ranged from 32.07 to 5.86 kg/mm at edge position and from 42.12 to 18.68kg/mm at flat position, respectively. Also, the values of Suweon 19 were higher than those of Buyeo. 5. It was considered that the compressive properties of corn at flat position were more important on the design data for corn harvesting and processing machinery than those of edge or longitudinal position. Also, grinding energy would be minimized when a corn was processed between about 12.5 to 17% moisture content and corn damage would be reduced when a corn was handled between about 19 to 24% moisture content in wet basis.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.55 no.4
• /
• pp.275-283
• /
• 2010

This experiment was conducted to construct process models to estimate grain weight (GW) and grain nitrogen content (GN) in rice. A model was developed to describe the dynamic pattern of GW and GN during grain-filling period considering their relationships with temperature, solar radiation and growth traits such as LAI, shoot dry-weight, shoot nitrogen content, grain number during grain filling. Firstly, maximum grain weight (GWmax) and maximum grain nitrogen content (GNmax) equation was formulated in relation to Accumulated effective temperature (AET) ${\times}$ Accumulated radiation (AR) using boundary line analysis. Secondly, GW and GN equation were created by relating the difference between GW and GWmax and the difference between GN and GNmax, respectively, with growth traits. Considering the statistics such as coefficient of determination and relative root mean square of error and number of predictor variables, appropriate models for GW and GN were selected. Model for GW includes GWmax determined by AET ${\times}$ AR, shoot dry weight and grain number per unit land area as predictor variables while model for GN includes GNmax determined by AET ${\times}$ AR, shoot N content and grain number per unit land area. These models could explain the variations of GW and GN caused not only by variations of temperature and solar radiation but also by variations of growth traits due to different sowing date, nitrogen fertilization amount and row spacing with relatively high accuracy.