• 화약ㆍ발파
• /
• 제36권3호
• /
• pp.10-18
• /
• 2018

동적 하중을 받는 암반의 역학적 거동은, 같은 크기의 최대 하중이라도 정적으로 가해지는 경우와는 다른 특성을 보인다. 동적 하중 하에서의 거동 특성을 규명하기 위한 실험적 접근 방법은 동적 하중의 제어와 계측 및 해석에 있어서 정적 조건에서의 실험 방법보다 더 많은 어려움이 있다. 수치해석적 방법은 물리적 실험이 아니라 수치해석적으로 실험을 실시함으로써 물리적 제약을 덜 받으므로 설계 단계에서 매우 유력한 해석 도구가 될 수 있다. 그러나 수치해석방법은 해석방법의 알고리즘이 적정하더라도, 입력 자료와 경계조건의 설정에 따라 계산 결과가 많이 달라질 수 있으므로 해석 시 세심한 주의가 필요하다. 본 논문에서는 동적 하중을 받는 암반 구조물의 거동을 수치해석적으로 검토할 때, 경계 조건, 동적 하중과 계산 시간 간격, 동적 하중 특성이 계산 결과에 미치는 영향을 검토하여, 동적 해석 시 경계조건과 계산 시간 간격의 설정 지침을 제공하고자 하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.1631-1635
• /
• 2011

To consider dynamic magnification effect at the static design stage, impact load factor is applied to design load. Current impact load factor adopted EUROCODE without verification while Japan suggested impact load factor including velocity of high-speed train throughout theoretical and experimental studies. On the purpose of evaluate current impact load factor, this study investigated the calculation of impact load factor from dynamic response of running train.

• 한국정밀공학회지
• /
• 제12권12호
• /
• pp.157-164
• /
• 1995

Straight belvel gear is used mainly for steering system, final reduction and differential gear in the automobile. The more high load, high velocity driving bevel gear, the more unsafe and unpleasant. In thid study, we get a kinematic equation by modelling straight bevel gear pair with simple elastic system, the dynamic characteristic analysis about this system, we got the dynamic load factor of tooth surface. Comparing the value of dynamic load factor by calculation with the measured value of Terauchi's experimental results is similar. We think it useful to analysis the vibration and the noise of straight bevel gear in operation with the analytic method of dynamic load of straight bevel gear using in this study.

• 전기학회논문지
• /
• 제57권4호
• /
• pp.596-602
• /
• 2008

This paper presents the dynamic characteristic analysis of Permanent Magnet Linear Synchronous Motor(PMLSM) according to variable load. In order to analyze dynamic characteristics, finite element method(FEM) was used for calculation of the parameter and the Matlab simulink was used for dynamic characteristic simulation. The measuring system of the dynamic characteristics was manufactured and the experiment results were compared with the simulation results.

• 한국주거학회논문집
• /
• 제11권2호
• /
• pp.129-137
• /
• 2000

This study is about the difference of South and East facing Cooling load of Apartment s Houses using Dynamic Heat-flow Calculation. Therefore, the purpose of this study is come in to use Material for the Thermal Environments of Apartment Houses. The results of the analysis are below. (1) For the peak load of degree hour; The highest is "I" unit and the next high load is H, F, E, C, B, G, D and A unit for the south facing Apartment houses. The higher load is "H" unit and the next high load is I, E, F, B, C, G, D, A Unit for the east facing Apartment houses. (2) For the total load of degree day; The highest load is "I" unit and the next high load is H, G, F, E, C, B, D and A Unit for the south facing Apartment houses. The highest load is "H" unit and the next high load is I, G, E, F, B, C, D, A Unit for the east facing Apartment houses. (3) For the total load of degree day; The highest load is "H" Unit for the east facing Apartment houses and the Lowest load is "A" Unit for the south facing Apartment houses.is "A" Unit for the south facing Apartment houses.nt houses.

• 한국철도학회논문집
• /
• 제9권5호
• /
• pp.588-593
• /
• 2006

The catenary system of a high speed train is designed to have a flexibility to ensure the contact with a pantograph during high speed running. The flexibility inevitably entails a vibration. The vibration is transferred to a utility pole through brackets. Therefore, the examination of the dynamic load at the bracket due to the train running is necessary for the design of the bracket. In this research, an equation of motion is derived to calculate the dynamic load at the bracket during high speed running and a computer program is developed. Also, the analyzed results are compared to characterize the dynamic load at the bracket.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.2203-2206
• /
• 2005

A load flow and short circuit fault simulation of AC electrified railway distribution systems is presented with DIgSILENT PowerFactory software. Load flow of electrified railways distribution system with concerning multi train lines and dynamic characteristics of train load is studied for different time laps. The dynamic characteristics of train load in starting and braking conditions with different starting and stopping times and its moving positions makes the load flow complicated so there is a great need in studying the effects of electrified railways on load flow. Short circuit fault transients is also studied and simulated for both power system or traction distribution system and their effects on the operation of the train sets is investigated.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 하계학술발표대회 논문집
• /
• pp.1386-1391
• /
• 2008

As the time goes by, the energy use in buildings are increasing threateningly. So, it is important to have an accurate energy load calculation for buildings. The accurate energy simulation program carries numerous input data. So, our purpose of this study is to verify the application of simplify modeling method which eliminates coordinates of building components instead of using full coordinates by using DOE2. After comparing original modeling method with simplify modeling method, we applied PAF for daylighting control in the building to verify the application of daylighting control in simplify modeling method. The results shows that there are little difference between original modeling and simplify modeling. Also it showed that application of daylighting control has little difference between original modeling so it is feasible to adapt simplify modeling. These results reveals that the application of simplify modeling is possible to predict energy load and use of the building.

• 한국농공학회지
• /
• 제39권2호
• /
• pp.124-133
• /
• 1997

Pile load test is good for estimating pile bearing capacity, but using this method is limited by time and cost required. Dynamic and static method is more convenient and economical, but confidence of estimated value by dynamic and static method are lower than that of pile load test. After being compared pile bearing capacity data obtained from pile load test with those of other two methods, the results from this study were summarised as follows. For allowable bearing capacity values greater than 175t per pile, bearing capacity acquired from static method was higher than that acquired from pile load test, whereas bearing capacity acquired from pile load test was higher than that acquired from static method for values under 175 per pile. It was that variance of bearing capacity was large when bearing capacity obtained by dynamic method was higher than 250t. Also bearing capacity based on dynamic method was higher than that based on pile load test. Allowable bearing capacity get from dynamic method suggested that carefull precautions are necessary in application for allowable bearing capacity values higher than 2S0ton per pile.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2006년도 하계학술발표대회 논문집
• /
• pp.531-535
• /
• 2006

Lots of programs and methods for calculating the maximum and dynamic thermal load of building have been developed and used practically. In this paper we calculated heat load in RTS method and compared them with result using TRNSYS in the same test space.