• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년 추계학술대회논문집
• /
• pp.334-336
• /
• 2008

A novel adaptive mesh refinement (AMR) strategy based on the Moment-of-Fluid (MOF) method for volume-tracking dynamic interface computation is presented. The Moment-of-Fluid method is a new interface reconstruction and volume advection method using volume fraction as well as material centroid. The mesh refinement is performed based on the error indicator, the deviation of the actual centroid obtained by interface reconstruction from the reference centroid given by moment advection process. Using the AMR-MOF method, the accuracy of volume-tracking computation with evolving interfaces is improved significantly compared to other published results.

• 한국응용과학기술학회지
• /
• 제32권4호
• /
• pp.661-668
• /
• 2015

The surface rheological properties of polymer monolayer show complicated non-linear viscoelastic flow phenomena when they are subjected to spreading flow. These spreading flow properties are controlled by the characteristics of flow units. The kinetics of the formation of an interfacial film obtained after spreading poly(diisobutylene maleic acid) at air-water interface were studied by measuring of the surface pressure with time. The experimental data were analyzed theoretically according to a nonlinear surface viscoelastic model. The values of dynamic modulus, static modulus, surface viscosities and rheological parameters in various area/ monomer were obtained by appling experimental data to the equation of nonlinear surface viscoelastic model.

• 한국전산유체공학회지
• /
• 제14권1호
• /
• pp.18-23
• /
• 2009

A novel adaptive mesh refinement(AMR) strategy based on the Moment-of-Fluid(MOF) method for volume-tracking dynamic interface computation is presented. The Moment-of-Fluid method is a new interface reconstruction and volume advection method using volume fraction as well as material centroid. The adaptive mesh refinement is performed based on the error indicator, the deviation of the actual centroid obtained by interface reconstruction from the reference centroids given by moment advection process. Using the AMR-MOF method, the accuracy of volume-tracking computation with evolving interfaces is improved significantly compared to other published results.

• 공업화학
• /
• 제5권4호
• /
• pp.630-636
• /
• 1994

열화처리 후 고무와 황동이 피복된 강선코드의 접박계면 변화를 오제 광전자 분광기와 주사 전자현미경으로 조사하였다. 열열화 후에는 접착층의 부분 산화와 추가 성장이, 습윤열화 후에는 접착층과 황동의 부분 소실이, 동적열화 후에는 접착층의 파괴와 철심의 부식이 관찰되었다. 이러한 접착계면의 변화를 인장시험에서 측정된 접착 성질과 관련지어 고찰하였다.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1998년도 춘계학술발표회논문집(1)
• /
• pp.291-296
• /
• 1998

The DAta management and Communication NETworks (DACONET), Which it is designed as a subsystem for Man-Machine Interface System of Korea Advanced LIquid MEtal Reactor(KALIMER MMIS) and advanced design concept is approached, is described. The DACONET has its roles of providing the real-time data transmission and communication paths between MMIS systems, providing the quality data for protection, monitoring and control of KALIMER and logging the static and dynamic behavioral data during KALIMER operation. The DACONET is characterised as the distributed real-time system architecture with high performance, Future direction, in which advanced technology is being continually applied to Man-Machine interface System Development of Nuclear Power Plants, will be considered for designing data management and communication networks of KALIMER MMIS

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2390-2395
• /
• 2008

The water droplet motion in an air flow microchannel with pores through which water emerges is studied numerically by solving the equations governing the conservation of mass and momentum. The gas-liquid interface is tracked by a level set method which is based on a sharp-interface representation for accurately imposing the matching conditions at the interface and is modified to implement the contact angle conditions on the wall and pores. The numerical results show that the droplet growth and detachment pattern depend significantly on the contact angle and inlet air velocity. Also, the dynamic interaction between the droplets growing on multiple pores is investigated. The pore arrangement subject to droplet merging is found to be not effective for water removal.

• Smart Structures and Systems
• /
• 제14권6호
• /
• pp.1173-1196
• /
• 2014

Real-time dynamic substructuring tests have been conducted on a cable-deck system. The cable is representative of a full scale cable for a cable-stayed bridge and it interacts with a deck, numerically modelled as a single-degree-of-freedom system. The purpose of exciting the inclined cable at the bottom is to identify its nonlinear dynamics and to mark the stability boundary of the semi-trivial solution. The latter physically corresponds to the point at which the cable starts to have an out-of-plane response when both input and previous response were in-plane. The numerical and the physical parts of the system interact through a transfer system, which is an actuator, and the input signal generated by the numerical model is assumed to interact instantaneously with the system. However, only an ideal system manifests a perfect correspondence between the desired signal and the applied signal. In fact, the transfer system introduces into the desired input signal a delay, which considerably affects the feedback force that, in turn, is processed to generate a new input. The effectiveness of the control algorithm is measured by using the synchronization technique, while the online adaptive forward prediction algorithm is used to compensate for the delay error, which is present in the performed tests. The response of the cable interacting with the deck has been experimentally observed, both in the presence of delay and when delay is compensated for, and it has been compared with the analytical model. The effects of the interface delay in real-time dynamic substructuring tests conducted on the cable-deck system are extensively discussed.

• 한국지반공학회논문집
• /
• 제19권1호
• /
• pp.173-180
• /
• 2003

토목섬유 경계 접촉면들의 동적거동을 이해하는데 매우 중요할 수도 있음에도 불구하고 접촉면들의 동적마찰저항과 변위속도 관계에 관한 연구가 아직까지는 미비한 실정이다. 이에 따라 토목섬유에 대한 실험적 인 연구를 진동대를 이용하여 수행하였다. 반복적, 변위속도 조절장치를 개발하여 사용하였으며 토목섬유 경계 접촉면들의 동적마찰저항과 변위속도사이의 관계를 조사하였다. 실험으로부터 지오텍스타일이 포함된 경계 접촉면에서는 변위속도 증가에 따라 전단강도도 증가한다는 중요한 결과를 얻었다. 이와는 달리 수침상태에서는 접촉면 사이에 갇힌 물에 의한 윤활 효과 등으로 인해 접촉 전단강도가 변위속도에 민감하지 않다는 결과를 얻었다. 본 시험결과는 토목섬유에 비교적 낮은 수직응력이 작용하는 매립장 덮개 및 사면의 동적안정 해석등에 적용할 수 있다.

• 한국공간정보시스템학회:학술대회논문집
• /
• 한국공간정보시스템학회 2000년도 학술회의 논문집 3권2호
• /
• pp.93-105
• /
• 2000

GIS는 속성자료와 관련하여 공간자료를 다루는데 강력한 수단이다. 그러나 GIS는 동적인 계획문제(dynamic planning problems)를 다루는데 있어서 분석기능과 인터페이스기능이 부족하다. 의사결정지원 체계(Decision Support Systems: DSS)는 그래픽사용자인터페이스(Graphic User Interface: GUI)기능, 모델링기능과 데이터베이스기능을 제공하여 GIS의 부족한 면을 보완한다. DSS의 새로운 분류인 공간의사 결정지원체계(Spatial Decision Support Systems: SDSS)는 공간차원의 문제를 취급할 시 표현기능, 기본적인 분석기능, 그리고 공간, 비공간자료 취급기능과 같은 GIS의 기능과 그래픽사용자인터페이스기능, 모델링기능, 그리고 데이터베이스기능과 같은 DSS의 기능을 통합한다. 계획지원체계(Planning Support Systems: PSS)는 SDSS의 기능에 더 진보된 공간분석기능과 시간기능을 추가한다. 이 연구에서는 GIS, 가치공학(value engineering: VE), 그리고 생애주기비용(life cycle costing: LCC)에 의한 토지이용계획에 따른 상수도관망의 용량확장을 위한 PSS의 구축에 초점을 맞추고자 한다. 이러한 PSS는 토지이용계획에 따른 상수도 필요량을 공급하고 도시성장 규제를 위한 일련의 용량확장대안을 작성하고 도시성장에 연관되는 상수도관망의 투자에 관한 문제를 다룬다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.2600-2608
• /
• 2011

The dynamic stability of railway vehicle has been one of the important issues in railway safety. The dynamic simulator has been used in the study about the dynamic stability of railway vehicle and wheel/rail interface. Especially, a small scale simulator has been widely used in the fundamental study in the laboratory instead of full scale roller rig which is not cost effective and inconvenient to achieve diverse design parameters. But the technique for the design of the small scale simulator for the fundamental study about the dynamic characteristics of the wheel-rail system and the bogie system has not been well developed in Korea. Therefore, the research about the development of the small scale simulator and the bogie has been conducted. As this paper, To predict the dynamic behavior of railway vehicle, we studied running stability test of 1/5 scaled bogie that similarity laws is applied using small scale derailment simulator. For the operation of the small scale derailment simulator, it is required to investigate the performance and characteristics of the system. This could be achieved by a comparative study between an analysis and an experiment. This paper presented the analytical model which could be used for verifying of the test results and understanding of the physical behavior of the dynamic system comprising the small scale bogie and the simulator.