• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 1999년도 춘계학술대회 논문집
• /
• pp.37-41
• /
• 1999

When an escalator is developed or modified for improved performance, estimation of dynamic characteristics of the escalator is required. But modeling of the escalator for a design purpose is very difficult and time consuming process. Especially, it is very difficult for the designer to use the simulation model during design process because it takes time and also the designer needs to know how to use the simulation program. In order to solve these problems, a graphic user interface program that can predict dynamic characteristics of an escalator is developed for the designer. Since this program has the necessary complicated escalator model inside, the designer does not have to know how to use the simulation program and design parameters can be obtained while design is in progress. The developed designer oriented interface program is explained and an example is shown.

• Journal of Mechanical Science and Technology
• /
• 제19권spc1호
• /
• pp.444-451
• /
• 2005

The analysis of human arm motion during steering maneuver is carried out for investigation of man-machine interface of driver and steering system Each arm is modeled as interconnection of upper arm, lower arm, and hand by rotational joints that can properly represents permissible joint motion, and both arms are connected to a steering wheel through spring and damper at the contact points. The joint motion law during steering motion is determined through the measurement of each arm movement, and subsequent inverse kinematic analysis. Combining the joint motion law and inverse dynamic analysis, joint stiffness of arm is estimated. Arm dynamic analysis model for steering maneuver is setup, and is validated through the comparison with experimentally measured data, which shows relatively good agreement. To demonstrate the usefulness of the arm model, it is applied to study the effect of steering column angle on the steering motion.

• 한국IT서비스학회지
• /
• 제5권3호
• /
• pp.165-172
• /
• 2006

In this paper, we designed a new type of X-internet framework by using Flash component and server service API and analyzed its performance. Proposed X-internet framework uses Flash MX Professional 2004, Java, and software which opened middleware and database. Since proposed framework use the server service API that we developed in this paper and Flash player, this framework does not need server module. Proposed framework enables to obtain design with dynamic user interface compare to Web application and enables to reduce development time. In analytical results, it has been shown that proposed x-internet framework have efficient characteristics such as network traffic, low development cost and dynamic user interface implementation. Since proposed X-internet framework can operate in environment of current developer friendly, it is useful for development of various new application programs and we confirm it through Flash web mail implementation by using proposed x-internet framework.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 하계학술대회 논문집 B
• /
• pp.1200-1202
• /
• 1993

There are many methods to investigate the physical properties of monolayers formed at the air-water interface. Among them, the displacement current method is appropriate for the investigation of the dynamic behavior of monolayers. The measuring system of displacement current method was constructed at home-made Kuhn type LB deposition apparatus using aluminium plate electrode. The currents induced by the dynamic motion of molecules were measured when the molecules were pressed by barrier. To verify the measuring system, we used 4-octyl -4'-(5-carboxy-pentamethyleneoxy)-azobenzene molecules which has two remarkable variations of surface pressure of monolayer at the air-water interface. We can detect the two peaks of displacement currents which shows that the orientations of molecules are changed greatly at the state of these two remarkable changes of surface pressure.

• 한국시뮬레이션학회논문지
• /
• 제8권3호
• /
• pp.29-37
• /
• 1999

When an escalator is developed or modified to improve its performance, estimation of dynamic characteristics of the escalator is required. But modeling of the escalator for a design purpose is very difficult and time consuming. Especially, it is very difficult for a designer to use the simulation model during design process because preparing a proper model takes time and also the designer needs to know how to use the simulation program. In order to solver these problems, a graphic user interface program that can predict dynamic characteristics of an escalator is developed for the designer. Since this program makes the necessary escalator model for simulation for itself, the designer does not need to know how to use the simulation program while design is in progress. In this paper, a designer oriented interface program is developed and an example is presented to show the effectiveness of the developed program.

• Ocean Systems Engineering
• /
• 제12권4호
• /
• pp.385-402
• /
• 2022

This paper deals with the study of hydrodynamic pressure in reservoir adjacent to the concrete gravity dam subjected to dynamic excitation. Widely famous finite element method is used to discretize the reservoir domain for modelling purpose. Pressure is considered as nodal variable following Eulerian approach. A suitable nonreflecting boundary condition is applied at truncated face of reservoir to make the infinite reservoir to finite one for saving the computational cost. Thorough studies have been done on generation of hydrodynamic pressure in reservoir with variation of different geometrical properties. Velocity profile and hydrodynamic pressure are observed due to harmonic excitation for variation of inclination angle of dam reservoir interface. Effect of bottom slope angle and inclined length of reservoir bottom on hydrodynamic pressure coefficient of reservoir are also observed. There is significant increase in hydrodynamic pressure and distinct changes in velocity profile of reservoir are noticeable for change in inclination angle of dam reservoir interface. Change of bottom slope and inclined length of reservoir bottom are also governing factor for variation of hydrodynamic pressure in reservoir subjected to dynamic excitation.

• 한국정밀공학회지
• /
• 제14권8호
• /
• pp.40-48
• /
• 1997

In this study, an analysis and design for hydraulic control system was developed. By using this system, the operator is able to simulate dynamic performance of the system without possessing special knowledge of software or control engineering. A graphical user interface was adopted in the system and all speration for simulation can be done by using window facilities on the display. The electro-hydraulic servo system is simulated to present the performances of the program and compared with the result of Matlab and experiment.

• 대한기계학회논문집A
• /
• 제24권6호
• /
• pp.1427-1437
• /
• 2000

In the authors＇ preceeding paper, an improved component mode synthesis (CMS) technique in which experimental data as well as finite-element data are available in sub-systems has been proposed. Thi s technique, called an improved experimental free-interface method (IEFIM), has been proved to be more accurate and more efficient than the conventional experimental CMS method based on McNeal's formulation. It is due to the facts that dynamic residual terms as well as static ones are compensated from experimentally obtained FRFs and that FRFs measured on any frequencies can be used for the compensation. In this paper, the technique is applied to the component mode synthesis of a car body structure. As a result, the applicability of the technique to a large structure is demonstrated.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1994년도 추계학술대회
• /
• pp.81-84
• /
• 1994

A clinically oriented EEG and EP mapping system was developed with user-friendly interface and easy interactive operations. The system was based on the graphical user interface developed with C/C++ and Software Development Kit (SDK) operated under Microsoft Windows 3.1. Continuous acquisition for the EEG signal and burst mode acquisition for EEG signal syncronized to the external stimuli arc implemented with real time display. A neural network based automatic artifact discrimation is developed and implemented with which examination time can be reduced by a factor of 3 or more. Several bands of spectral maps and spectrums arc displayed for EEG diagnosis. Amplitude maps of EP signal at specified times by operator are displayed together with cine mode of EP maps for dynamic study. Source localization and other statistical signal processing are also included.

• 대한기계학회논문집A
• /
• 제24권5호
• /
• pp.1133-1145
• /
• 2000

It is necessary to develop an efficient analysis method to identify the dynamic characteristics of a large mechanical structure and update its finite element model. That is because these processes need the huge computation of a large structure and iterative estimation due to the use of the first- order sensitivity. To efficiently carry out these processes, a new method, called the generalized free-interface mode sensitivity method, has been proposed in the authors' preceeding paper. This method is based on substructuring approach such as a free-interface method and a generalized synthesis algorithm. In this paper, the proposed method is applied to the model updating of a car body structure to verify its accuracy and reliability for a large mechanical structure.