• KIEAE Journal
• /
• v.9 no.2
• /
• pp.73-80
• /
• 2009

In the early twentieth century, many architects still practised eclectic design elements. Emergence of new building materials such as steel, concrete and glass were not yet found fresh roles in architectural design. It was Brussels that the use of modern materials gave rise to their new forms and gave influence to not only building skins but also spatial organization. Art Nouveau architecture is often seen as revolutionary and pioneering modern architecture against eclectic classicism prevalent in the 18th and 19th centuries. Despite the fact that some scholars point out that Art Nouveau is more a transient phenomenon than modern architecture proper, no one would deny that Art Nouveau carries a good deal of modern characteristics. This paper intends to show rather ambivalent perspectives upon Art Nouveau architecture. Although it insinuates overly dynamic nature in architectural languages, it does not hamper us from reading Art Nouveau as a vital component of modern architecture. Through a careful analysis of the early domestic designs of Victor Horta, it becomes evident that his work can provide modern architecture a meaningful alibi for its growth. Victor Horta's house design is well known to the public, both for his classical tastes and for its changing implementation. Horta's modern quality is never adequately recognized, partly due to his eye catching modern iron properties and sinuous ornamentation. This paper tries to offer an insight into the complicated stage set of the fin-de-$si{\grave{e}}cle$ through the work of Victor Horta whose influence has been immense in the making of modern architecture.

• Journal of Electrical Engineering and Technology
• /
• v.1 no.1
• /
• pp.120-126
• /
• 2006

Ferroelectric materials have been widely investigated for high density dynamic random access memories, opto-electrics, and tunable microwave devices due to their properties. In this study, we have investigated the dielectric properties of Ti doped $K(Ta,\;Nb)O_3$ thin films. By doping Ti Into the $K(Ta,Nb)O_3$ system, Ti with a valence value of +4 will substitute Ta or Nb ions with a valence value of +5. This substitution will introduce an acceptor state. Therefore, this introduced acceptor state will reduce dielectric loss by trapping electrons. Using 3% Ti-doped $K(Ta,Nb)O_3\;targets,\;K(Ta,Nb)O_3$:Ti films were grown in MgO(001) crystals using pulsed laser deposition. First, growth conditions were optimized. A reduction in the loss tangent was observed for Ti-doped $K(Ta,Nb)O_3$ relative to undoped films, although a reduction in tunability is also seen. The crystallinity, morphology, and tunability of $K(Ta,Nb)O_3$:Ti films are reported.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2000.04a
• /
• pp.51-56
• /
• 2000

Demand for new nondestructive evaluations is growing to detect tensile crack growth behavior to predict long term performance of materials and structure in aggressive environments, especially when they are in non-visible area. Acoustic emission technique is well suited to these problems and has drawn a keen interests because of its dynamic detection ability, extreme sensitivity and location of growing defects. In this study, we analysed acoustic emission signals obtained in tensile test of high strength fire resistance steel for frame structure with time frequency analysis methods. The results obtained are summaries as follows ; In the T and TN specimen consisting of ferrite and pearlite grains, most of acoustic emission events were produced near yield point, mainly due to the dislocation activities during the deformation. However, B specimen under $600^{\circ}C$ - 10min had a two peak which was attribute to the presence of martensite phase. The first peak is before yield point the second is after yield point. The sources of second acoustic emission peak were the debonding of martensite-martensite interface and the micro-cracking of brittle martensite phase. In $600^{\circ}C$-30min to $700^{\circ}C$-60min specimens, many signals were observed from area before yield point and counts were decreased after yield point.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.10
• /
• pp.4640-4661
• /
• 2018

To cope with the explosive growth of Internet services, Service Function Chaining (SFC) based on Software-defined Networking (SDN) is an emerging and promising technology that has been suggested to meet this challenge. Determining the placement of Virtual Network Functions (VNFs) and routing paths that optimize the network utilization and resource consumption is a challenging problem, particularly without violating service level agreements (SLAs). This problem is called the optimal SFC placement problem and an Integer Linear Programming (ILP) formulation is provided. A greedy heuristic solution is also provided based on an improved two-step mapping algorithm. The obtained experimental results show that the proposed algorithm can automatically place VNFs at the optimal locations and find the optimal routing paths for each online request. This algorithm can increase the average request acceptance rate by about 17.6% and provide more than 20-fold reduction of the computational complexity compared to the Greedy algorithm. The feasibility of this approach is demonstrated via NetFPGA-10G prototype implementation.

• Advances in Computational Design
• /
• v.3 no.1
• /
• pp.35-47
• /
• 2018

Design of settlement space is a complicated process while reasonable spatial layout bears great significance on the development and resource allocation of a settlement. The study proposes a weighted L-system generation algorithm based on CA (Cellular Automation) model which tags the spatial attributes of cells through changes in their state during the evolution of CA and thus identifies the spatial growth mode of a settlement. The entrance area of the Caidian Botanical and Animal Garden is used a case study for the model. A design method is proposed which starts from the internal logics of spatial generation, explores possibility of spatial rules and realizes the quantitative analysis and dynamic control of the design process. Taking a top-down approach, the design method takes into account the site information, studies the spatial generation mechanism of settlements and further presents a engine for the generation of multiple layout proposals based on different rules. A optimal solution is acquired using GA (Genetic Algorithm) which generates a settlement spatial layout carrying site information and dynamically linked to the surround environment. The study aims to propose a design method to optimize the spatial layout of the complex settlement system based on parametric generation.

• Architectural research
• /
• v.14 no.4
• /
• pp.117-124
• /
• 2012

High rise office buildings represent one of the most energy-intensive architectural typologies. The growth of urban population necessitates sustainable high rise towers that lessen environmental impacts and energy consumption. Among various sustainable strategies, the integrated design is long known to be an important process that has great impact on building's sustainability. The framework for this paper is based on the case study of integrated towers that are located in different climate zones. The paper specifically addresses to what extent climate conditions influence the design of a high rise building and what kinds of the climate integrated design has been implemented. Qualitative case studies were carried out using published data and architectural drawing set. The technical work presented in the paper is based on computer simulation that examines the insolation analysis using hourly recorded weather data. The analysis results revealed that the site and building envelope integration and the site and building service systems have shown the most frequently employed in the integrated towers through the implementation of renewable resource integration, high performance envelopes and sustainable building service systems. Internal comfort and further energy saving in the integrated towers are offered through an automatic building management system. Due to the dynamic climate conditions, integration of building systems requires a sophisticated approach to building sustainability.

• Korean Journal of Adult Nursing
• /
• v.15 no.4
• /
• pp.551-562
• /
• 2003

Purpose: All nurses should provide spiritual care for their clients. It is especially important to care spiritually for cancer patients facing the crisis of life. Therefore, the purpose of this study is to analyze the concept of spirituality which is one of the basic concepts for spiritual care in cancer patients. Method: The subjects of this study were 8 cancer patients; 2 Christians,3 Buddhists, and 3 persons who did not have any religion. The data was collected and analyzed by Hybrid Model. Result: The results of this study were as follows: Dimensions of spirituality(vertical dimension connected with the absolute being, horizontal dimension related to others, existential dimension related to seeking of meaning), attributes of spirituality(dynamic process strengthened in suffering due to struggle with cancer, connectedness with the absolute being or will and belief in oneself, transcendence of reality, meaning and purpose of life, future oriented), outcomes of spirituality(intrinsic, behavioral). Conclusion: The spirituality of cancer patients is manifested differently by his(her) religion, age, past experiences and burden of family, and is able to be strengthened with cancer. Therefore, nurses should recognize that diagnosis and deterioration of cancer is not only a spiritual crisis but can be a good chance for spiritual growth, as well.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.9
• /
• pp.4451-4456
• /
• 2016

Background: In this study, we examined epidemiological aspects of dynamic changes in incidences of laryngeal cancer in male and female populations in Kazakhstan. Materials and Methods: Primary data were for registered patients with malignant laryngeal tumors in the whole country during the period of 1999-2014. Evaluation of changes in laryngeal cancer incidence in the population of Kazakhstan was performed using component analysis. Results: It was determined that the number of patients with laryngeal cancer in the whole country is decreasing although with conflicting impacts of different factors. Despite population growth (all - ${\Delta}_P=+66.1%$, men - ${\Delta}_P=+70.9%$ and women - ${\Delta}_P=+46.4%$), and aging (all - ${\Delta}_A=+45.1%$, men - ${\Delta}_A=+54.3$ and women - ${\Delta}_A=+22.2$), the reduction in risk of developing the disease (all - ${\Delta}_R=-165.6%$, men - ${\Delta}_R=-170.9%$ and women - ${\Delta}_R=-141.0%$) was overwhelming. Conclusions: This investigation was the first epidemiological study of dynamics of laryngeal cancer by component analysis in population of Kazakhstan. Implementation of the results of the study is recommended in management of anti-cancer activities for laryngeal cancer.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.494-499
• /
• 2007

The ballast, one of a track components, plays an essential role as intermedium in transmitting train traffic-load to subgrade safely, and deterioration of ballast caused by cumulative load effects growth of track irregularity. Especially in the case of Gyeongbu high-speed railway, the deteriorating speed of ballast by dynamic vibration is faster than conventional line because KTX is longer than normal trains in length and it's velocity is very fast with high speed of 300km/h as well. In addition, ballast is a nonlinear material contrary to ordinary metal which has homogeneous property and this property of ballast may cause transformation of ballast. Therefore the theoretical modeling of ballast is quite complicated and it is hard to ensure the reliability of the result. The objective of this paper is to examine the availability of GPR(Ground Penetrating Radar) in estimating the thickness and the degree of deterioration of ballast. First, We figured out the principle of GPR which is the technique of evaluating the condition of ballast and then analyzed data which were measured at Gyeongbu high-speed railway where KTX is running now.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05b
• /
• pp.336-343
• /
• 1998

An iteration method has been developed for determining crack growth and fracture resistance cure (J-R curve) from the load versus load-line displacement record only. In this method, the hardening curve, the load versus displacement curve at a given crack length, is assumed to be a power-law function, where the exponent varies with the crack length. The exponent is determined by an iterative calculation method with the assumption that the exponent varies linearly with the load-line displacement. The proposed method was applied to the static J-R tests using compact tension(CT) specimens, a three-point bend (TPB) specimen, and a cracked round bar (CRB) specimen as well as it was applied to the quasi-dynamic J-R tests using CT specimens. The J-R curves determined by the proposed method were compared with those obtained by the conventional testing methodologies. The results showed that the J-R curves could be determined directly by the proposed iteration method with sufficient accuracy in the specimens from SA508, SA533, and SA516 pressure vessel steels and SA312 Type 347 stainless steel.