• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.10a
• /
• pp.247-252
• /
• 2000

In this paper, we discuss frequency allocation and sharing for high speed radio access network in domestic 5㎓ the band. In order to evaluate the possibility of frequency sharing between meterological radar and high speed radio access network we analyses radio interference of meterological radar by means of minimum coupling loss method and Monte Carlo simulation And simulations show that it is necessary to use DFS(Dynamic Frequency Selection) scheme for frequency sharing between meterological radar and high speed radio access network.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.4
• /
• pp.751-758
• /
• 2000

In this paper, we discuss frequency allocation and sharing for high speed radio access network in domestic 5GHz the band. In order to evaluate the possibility of frequency sharing between meteorological radar and high speed radio access network, we analyses radio interference of meteorological radar by means of minimum coupling loss method and Monte Carlo simulation. And simulations show that it is necessary to use DFS(Dynamic Frequency Selection) scheme for frequency sharing between meteorological radar and high speed radio access network.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.7B
• /
• pp.632-641
• /
• 2006

Recently FCC has considered about the unlicensed device operation in licensed bands. However, this operation can give the harmful interference to the existent licensed system while unlicensed devices operate. Therefore, there should be strict requirements to protect licensed system. So in this paper we propose dynamic frequency selection method in the MAC layer, which is based on the cognitive radio technology. The proposed dynamic frequency selection method creates channel lists after sensing the licensed channels. And it helps the CR base station immediately to moves the current channels that are used by the unlicensed system to other available bands dynamically when a licensed system's signal is detected. This method can reduce interference that is caused by unlicensed devices. In addition, it can maximize channel utilization with enabling coexistence of unlicensed system and licensed system.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 2008.10b
• /
• pp.634-642
• /
• 2008

Radio wave is the valuable resources in $21^{st}$ century. It will be widely used in various applications such as DMB, USN, telematics, and home network as well as mobile and wireless communications. Cognitive Radio technology is devised to maximize the utilization of radio resources by sensing near-by spectrum and dynamic and allocating free resources dynamically and adaptively. Wireless links for the secondary user need to be frequently switched to idle frequencies during the transmission of multimedia data in the cognitive radio based system. This may cause delay and information loss, and QoS degradations occur inevitably. The efficient frequency allocation scheme is necessary to support the seamless multimedia service to the secondary user while maintaining QoS of the primary user. This paper suggests a frequency selection scheme which considers other parameters such as cell load, data rate, and available bandwidth than just received signal strength during the frequency selection process. The performance of our proposed scheme is analyzed by simulation.

• The Korean Journal of Applied Statistics
• /
• v.27 no.3
• /
• pp.373-386
• /
• 2014

A word cloud is a visualization of word frequency in a given text. The importance of each word is shown in font size or color. This plot is useful for quickly perceiving the most prominent words and for locating a word alphabetically to determine its relative prominence. With dynamic graphics, we can find the changing pattern of prominent words and their frequencies according to the changing selection of chapters in a given text. We can define the word frequency matrix. In this matrix, rows are chapters in text and columns are ranks corresponding to word frequency about the words in the text. We can draw the word frequency matrix plot with this matrix. Dynamic graphic can indicate the changing pattern of the word frequency matrix according to the changing selection of the range of ranks of words. We execute an English Bible text visualization using word clouds and dynamic graphics technology.

• Journal of Mechanical Science and Technology
• /
• v.19 no.10
• /
• pp.1846-1855
• /
• 2005

This paper presents a new stochastic controller applied on the vibration control system under irregular disturbances based on the mode selection scheme. Measured displacement and frequency characteristics are simultaneously used in designing a mode selecting controller. This technique is validated by applying to the suppression problem of a flexible beam with randomly vibrated circumstances. The presented method, called Mode Selecting Stochastic Controller, uses the frequency measurement of the flexible system based on a Fast-Fourier transformation algorithm. This controller is constructed by combining mode selection method with previous known Stochastic Controller in real time: Numerical simulations and several experiments are conducted to validate the proposed method. The performance of the proposed method is compared with a stochastic controller developed recently. This method was improved compared with previous one.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.4 no.1
• /
• pp.9-16
• /
• 2008

This paper presents a frequency selection algorithm for minimization power consumption of processor in Mobile System. The proposed algorithm has processor designed low power processor using clock gating method. Clock gating method has improved the power dissipation by control main clock through the bus which is embedded clock block applying the method of clock gating. Proposed method has compared power consumption considered the dynamic power for processor, selected frequency has considered energy gain and energy consumption for designed processor. Or reduced power consumption with decreased processor speed using slack time. This technique has improved the life time of the mobile systems by clock gating method, considered energy and using slack time. As an results, the proposed algorithm reduce average power saving up to 4% comparing to not apply processor in mobile system.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.3
• /
• pp.100-111
• /
• 2009

Cognitive radio is an advanced technology for efficient utilization of under-utilized spectrum via spectrum sensing. CR users should move from current allocating channel to empty channel to avoid the interference to the primary user if the primary user is allocating that channel. Thus, CR system cannot support the CR user's QoS(Quaiity of Service). In this paper, we propose dynamic frequency selection method based on Genetic Algorithm with power control. It is to find the optimization channel for satisfying various CR user's needs with the power control method to minimize the CR user's interference to the primary user. And, we propose the Genetic Algorithm(GA) which determines the best configuration for CR communication systems. The computer simulation results show that the proposed method guaranteed the primary user's decodability and the optimized solution for various channel status.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.854-857
• /
• 2015

As the number of devices integrated on system-on-chip(SoC) increases exponentially, energy reduction technology is essential. Dynamic Voltage and Frequency Scaling (DVFS) is a very effective technique for reducing power consumption. Since it requires complex voltage regulators and PLL circuits, DVFS tends to have significant overheads. In this paper, we propose a new voltage selection algorithm to minimize transition overhead for multiprocessor SoC (MPSoC). Simulation results show that proposed algorithm appears less energy consumption with transition overhead even though maintains performance.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.8 no.1
• /
• pp.10-17
• /
• 2009

Spindle design is very important for the improvement of the competitive power in production cost of high quality machine tools. The important factor in spindle design is not only to improve the natural frequency of spindle but also to reduce displacement of spindle end. In this paper, parameters those influence on static and dynamic stiffness of high-speed spindle have selected form preceding studies. And those selected parameters are applied to Taguchi Method. To perform FEM analysis, bearing conditions are selected with optimized condition. To know how to improve static and dynamic stiffness of machine tool spindle, natural frequency and displacement of spindle end are obtained by FEM analysis. The Taguchi Method was used to draw optimized condition of bearing position and it's stiffness. From these results, amplitude of vibration is enough good less than $3{\mu}m$ pk-pk of the spindle of 40,000rpm manufactured in this work by the optimal design.