• 수산해양기술연구
• /
• 제44권3호
• /
• pp.218-228
• /
• 2008

This paper describes on the real-time tracking of ship's dynamic behavior by AIS information in the coastal waters. The AIS data was received at a land station by using the antenna of AIS receiver mounted on the rooftop of the laboratory, Pukyong National University (PKNU), Busan, Korea, and stored as a NMEA format of serial output sentence of VDM(VHF Data-Link Message) and displayed on the ENC(Electronic Navigational Chart) of a PC-based ECDIS. In this study, the AIS receiver was mainly used to obtain the dynamic information that is necessary to evaluate and track the movement situation of training ship "KAYA" of PKNU in the coastal waters. The change of position with time for the ship turning under the rudder angle of port $30^{\circ}$ was correctly tracked with the turning circle of 940 m in diameter on the ENC of a PC-based ECDIS. Then, the dynamic information of the AIS system was updated every 6.29 seconds under the turning situation for the speed of 10.9 knots and every 21.65 seconds under the situation running at the speed of 11.05 knots on the straight line route of $155^{\circ}$, respectively. In case of AIS target tracking in the inshore zone behind large topographical obstructions, such as mountain and apartment buildings, the update rate of dynamic information was irregularly changed by the existence of land obstacles. However, the position tracking by AIS information under the situation existing no sea obstructions was achieved in real or near real-time and the instant presentation of course alternations for the ship was correctly monitored by using a PC-based ECDIS. From these results, we concluded that the PC-based ECDIS technology and methodology combined with the AIS information can be easily extended and applied to the surveillance and management for the fishing operation of fishing vessels in the coastal zone and in the EEZ fishing grounds.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2010년도 추계학술대회
• /
• pp.31-33
• /
• 2010

ECDIS(Electronic Chart Display and Information System 전자해도정보시스템)와 같이 진보된 IT 기술을 적용한 항해장비는 단순히 항해의 목적으로 사용하는 것 이상으로, 해양환경의 보호와 감시에 응용하는 등의 방법으로 그 활용범위를 직접적이고 적극적으로 확대할 수 있다. 종이해도와 달리, ECDIS는 '시간'이라는 4차원적 요소를 도입함으로써 동적시스템(Dynamic System)으로 전환이 용이하다. 이것은 조석, 조류, 바람과 파도와 같은 시간변수(Time Variables) 데이터를 적용함으로써 가능하다. 이 시간변수들을 어군이동위치, 계절변화에 따른 해저지형, ballast water의 취수를 위한 청수지역 등과 함께 활용을 한다면, green ECDIS를 활용한 green navigation은 현실화가 가능하다. 이에 따라 해상종사자의 환경인식은 뚜렷하게 그리고 유용하게 증가할 것이다. 본 논문에서는 green ECDIS의 개념과 모형의 설계 그리고 프로토타입의 개발을 제안하고자 한다.

• 수산해양기술연구
• /
• 제43권3호
• /
• pp.212-221
• /
• 2007

This paper describes on the evaluation and management of work process in suction hopper dredger and grab bucket dredger as an application of a PC-based ECDIS system. The dynamic tracking of dredging bucket and the data logging of grab dredging information were performed by using the grab dredging vessel "Kunwoong G-18". The position and route tracking of the dredger moving toward the ocean dumping site of dredged material was performed by using the hopper dredging vessel "Samyang-7". The evaluation of wok process in the dredging field, for grab dredger, was continuously carried out on January to May, 2006, in Incheon Hang and for hopper dredger, on July to December, 2003, in Busan Hang, Korea. The dredging information, such as dredger's position, heading, dredging depth and route track which was individually time stamped during the dredging operation, was automatically processed in real-time on the ECDIS and displayed simultaneously on the S-57 ENC chart. From these results, we conclude that the ECDIS system can be applied as a tool in order to manage the work process during the dredging operation, and also in order to generate the factual record of the dredging activities that is sufficient for dredging inspector to accurately evaluate the contract performance even in the absence of a full-time onboard inspector.

• 한국해양환경ㆍ에너지학회지
• /
• 제12권4호
• /
• pp.296-301
• /
• 2009

전자해도(ENC)는 해양에서의 항해를 위한 장비인 전자해도시스템(ECDIS)에 사용되는 공인된 해도 데이터이며, 종이해도의 내용을 디지털화한 자료로서 최근 들어 활발하게 활용되고 있다. 기존의 전자해도는 국제수로기구(IHO)에서 간행한 S-57 및 S-52 등의 표준에 따라 제작되고 있지만 고정수심 등 종이해도의 정적인 특성을 반영하고 있으므로 급속히 발전하는 정보통신기술과 고 정밀 측량기술의 성과를 충분히 활용하지 못하고 있다. 본 논문에서는 이러한 기존의 전자해도의 활용분야를 확장하면서 고정밀의 측량자료와 동적인 해양의 특성을 지원할 수 있는 다이나믹 전자해도에 대한 개발방안을 제시하고 시범적인 다이나믹 전자해도의 연구결과에 대한 활용가능성을 살펴본다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2009년도 추계학술대회
• /
• pp.84-86
• /
• 2009

IMO NAV54차의 권고에 의거하여 전자해도와 ECDIS는 2012년부터 단계적으로 선박에 탑재할 것을 의무화하고 있다. 우리나라는 상대적으로 빠른 시기인 1997년부터 전자혜도를 제작하기 시작하여 현재는 전해안을 디지털화함으로써 It강국으로서의 위상을 높혔다. 2008년부터 GRID based전자해도를 공급하기 시작하였고, Dynamic ENC, MIO, S-100, AML 등의 차세대전자해도를 추진하고 있다. 국내공급대행업체뿐만 아니라 PRIMAR와 IC-ENC등의 글로벌전자해도유통센타(RENC)를 통해 전세계에 공급하고 있다. 전자해도는 ECDIS드의 기본 항해장비에 적용될 뿐 아니라, VTS,AIS,VMS, 기상정보, 항로표지모니터링 등 다양한 분야의 기본맵으로 채택되고 있다. 또한 다양한 인터페이스, 3D Display, 해저지형도, 육해상 지도통합 등 기술적인 발전이 거듭되고 있어 명실공히 수로, 향해, 관제, 감시, 환경 등을 포괄하는 e-Navigation의 중심으로 서고 있다.

• 수산해양기술연구
• /
• 제50권1호
• /
• pp.21-29
• /
• 2014

The dynamic information of radar and automatic identification system (AIS) for targets obtained from the traffic vessels operating in the north outer harbor and surrounding waters of Busan port, Korea. The target information was analyzed to investigate the potential collision risk resulting from the invalid true heading (HDT) information of AIS and the integration ambiguity in the graphic presentation of both tracked data sets for two systems. An integrated display system (IDS) for supporting the navigator of offshore fishing vessels was also developed to find possible maneuvering solutions for collision avoidance by comparing radar data with AIS data in real-time at sea. Consequently, the multiple functions of IDS can provide additional information that is potentially valuable for taking action to avoid the collision in offshore fishing vessels. However, the integration criteria of radar and AIS targets in the IDS must be carefully established to eliminate the fusion ambiguity in the graphic presentation of both AIS and radar symbols such as the one or two physical targets which are very close to each other.

• 수산해양기술연구
• /
• 제45권3호
• /
• pp.165-176
• /
• 2009

The process of berthing/deberthing operations for entering/leaving vessels in Busan northern harbor was analyzed and evaluated by using an integrated VTS(vessel traffic service) system installed in the ship training center of Pukyong National University, Busan, Korea. The integrated VTS system used in this study was consisted of ARPA radar, ECDIS(electronic chart display and information system), backup(recording) system, CCTV(closed-circuit television) camera system, gyro-compass, differential GPS receiver, anemometer, AIS(automatic identification system), VHF(very high frequency) communication system, etc. The network of these systems was designed to communicate with each other automatically and to exchange the critical information about the course, speed, position and intended routes of other traffic vessels in the navigational channel and Busan northern harbor. To evaluate quantitatively the overall dynamic situation such as maneuvering motions for target vessel and its tugboats while in transit to and from the berth structure inside a harbor, all traffic information in Busan northern harbor was automatically acquired, displayed, evaluated and recorded. The results obtained in this study suggest that the real-time tracking information of traffic vessels acquired by using an integrated VTS system can be used as a useful reference data in evaluating and analyzing exactly the dynamic situation such as the collision between ship and berth structure, in the process of berthing/deberthing operations for entering/leaving vessels in the confined waters and harbor.

• 수산해양교육연구
• /
• 제29권1호
• /
• pp.201-208
• /
• 2017

The major cause of the marine accidents is the collision with a moving object such as ship as well as the fixed object such as breakwater. Therefore, the most effective way to reduce the maritime ship accidents is the prevention of collision. In order to decrease the collision, it is principle that the navigation officer promptly judges the dangerous condition and makes the quick response. The ship does not allow any object or other ships approaching its surrounded area called ship area so that it prevents the collision. Generally, the ship which has high speed or poor maneuvering capability shall be managed from the distance so that the other ship does not invade its ship domains(watching distance, blocking distance). Accordingly, this study sets the navigational risk assessment model by applying ship dynamic domain and collision judgement method considered ship length, speed and navigational capability. It also reviewed the validity of the model and evaluated the perilous water way (Maenggol Channel) and a curved route near Maenggol Channel. As a result, in case of a ship with 100m in length passing Maenggol Channel, it represented "warning" level before 1.5nm to the entry, "dangerous"level 0.75nm before to it and "very dangerous" level 0.5nm before to it and then "dangerous"level again up to the entry. Applying to the curved route also showed the same results as the Narrow Channel or Maenggol Channel. This analysis highly matched with the actual navigation results. In the future, this model will be useful for coastal navigation safety chart development and safety evaluation for route or port development. It also allows to evaluate the dangerous route or the best route by applying the result into ECDIS so that it will finally help to reduce the marine accidents. Eventually the model will be effective for the marine traffic simulation evaluation forced by Maritime Traffic Safety Act.