• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1998년도 춘계학술대회논문집; 용평리조트 타워콘도, 21-22 May 1998
• /
• pp.602-607
• /
• 1998

Rubber materials are extensively used in various machine design application, mainly for vibration/shock/noise control devices. Over the years an enormous effort has been put into developing procedures to provide properties of rubber material for design function. However, there are still a lot of difficulties in the understanding of dynamic characteristics of the rubber components in compression. In this paper, the dynamic characteristics of rubber materials for anti-vibration under compression were investigated. Dynamic and static tests for rubber material with 3 different hardness were performed. In dynamic tests, non-resonance method, impedance method, was used to obtain the complex modulus (storage modulus and loss factor) and the effects of static pre-strain on the dynamic characteristics were investigated. Also, a relation equation between linear dynamic and nonlinear static behavior of rubber material was discussed and its usefulness to predict their combined effects was investigated.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2015년도 추계학술대회
• /
• pp.288-290
• /
• 2015

삼성전자나 현대차와 같은 기업뿐만 아니라, UN에서 정상회의를 주제하는 국제 컨퍼런스 담당자들은 이해관계자들과의 커뮤니티에서 현재 조직의 목표와 미래의 비전을 강하게 어필하는 Moving Identity를 중시한다. 이러한 Moving Identity를 홍보와 광고에 어떻게 Dynamic Branding을 내포하여야 할 것인가가, 연구해야 할 중요한 부분이다. 본 논문에서는 ACM SIG CHI 2015 Conference opening에서 상영된 애니메이션에, Moving Identity를 설계 적용한 홍보영상을 Dynamic Branding 관점에서 설계하고 연구하여 제작하였다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제2권4호
• /
• pp.217-222
• /
• 2010

Since 1980's, optimum design techniques for ship structural design have been developed to the preliminary design which aims at minimum weight or minimum cost design of mid-ship section based on analytic structural analysis. But the optimum structural design researches about the application for the detail design of local structure based on FEA have been still insufficient. This paper presents optimization technique for the detail design of a racing motor boat. To improve the performance and reduce the damage of a real existing racing boat, direct structural analyses; static and non-linear transient dynamic analyses, were carried out to check the constraints of minimum weight design. As a result, it is shown that the optimum structural design of a racing boat has to be focused on reducing impulse response from pitching motion than static response because the dynamic effect is more dominant. Optimum design algorithm based on nonlinear finite element analysis for a racing motor boat was developed and coded to ANSYS, and its applicability for actual structural design was verifed.

• 대한기계학회논문집A
• /
• 제24권8호
• /
• pp.1949-1957
• /
• 2000

All the loads in the real world act dynamically on structures. Since dynamic loads are extremely difficult to handle in analysis and design, static loads are utilized with dynamic factors. The dyna mic factors are generally determined based on experiences. Therefore, the static loads can cause problems in precise analysis and design. An analytical method based on modal analysis has been proposed for the transformation of dynamic loads into equivalent static load sets. Equivalent static load sets are calculated to generate an identical displacement field in a structure with that from dynamic loads at a certain time. The process is derived and evaluated mathematically. The method is verified through numerical tests. Various characteristics are identified to match the dynamic and the static behaviors. For example, the opposite direction of a dynamic load should be considered due to the vibration response. A dynamic bad is transformed to multiple equivalent static loads according to the number of the critical times. The places of the equivalent static load can be different from those of the dynamic load. An optimization method is defined to use the equivalent static loads. The developed optimization process has the same effect as the dynamic optimization which uses the dynamic loads directly. Standard examples are solved and the results are discussed

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.687-690
• /
• 1995

The configuration of design technology in 21st century must require collaborative design system, in which distributed design organizations and their related enterprises can mutually cooperate by overcoming time and regional restictions, and by exactily exchanging and sharing desing data. To achieve these objectives, it is necessary that the design system can propery deal with the dynamic change between regionally distributed modules. In this paper, we will discuss developing the dynamic virtual collaborative design system based on WWW by implementing recent web technologies such as Java and VRML.

• Wind and Structures
• /
• 제30권2호
• /
• pp.155-163
• /
• 2020

Previous research has shown that wind acceleration components produce a signal that can vibrate single-degree of-freedom oscillators, whose dynamic responses enable to configure design spectra for structures subject to wind. These wind design spectra present an alternative method for evaluating the dynamic response of structures and are a suitable tool for running modal analyses. Here, a generalised method for producing wind design spectra is proposed. The method consists of scaling existing spectra to adjust to a wider range of building properties and terrain conditions. The modelling technique is tested on a benchmark building to prove that its results are consistent with experimental evidence reported in the past.

• 한국터널지하공간학회 논문집
• /
• 제19권5호
• /
• pp.717-732
• /
• 2017

최근 급증하는 도로 교통량을 원활히 처리할 수 있는 대안으로 복층터널과 같은 지하구조물의 건설이 증가하고 있다. 복층터널은 내부에 상부와 하부를 분리하는 중간슬래브가 존재한다. 중간슬래브는 차량이 주행할 때 발생하는 차량의 동적하중으로 인하여 동적거동을 하게 되며, 그 동적거동을 정확히 파악하여 설계 및 해석에 이용하는 것이 중요하다. 본 연구에서는 복층터널 중간슬래브의 구조형식, 설계속도, 주행차량 및 노면조도 등을 고려한 해석모델을 작성하고 노면에 차량이 일정속도로 주행하는 경우에 대해 3차원 동적해석을 수행하여 복층터널 중간슬래브의 동적거동을 분석하였다. 그 결과, 중간슬래브의 동적영향을 대표하는 동적확대계수는 탄성받침 지지조건 및 보통의 노면조도 조건에서 가장 크게 증폭되는 경향을 보였고, 양호한 노면조도와 강결연결 조건에 의해 동적영향을 작게 할 수 있음을 확인하였다.

• International Journal of Automotive Technology
• /
• 제6권4호
• /
• pp.403-411
• /
• 2005

The bus is regarded as one of the most frequently used public transportation systems, the research and development on driving stability, safety, and convenience for drivers and passengers has tremendously increased in recent days. This paper investigated the design of the bus door mechanism composed of an actuator (or motor) and linkages. The bus door mechanism is divided into many types according to the coupling of the linkages and the driving system. The mathematical models of all types of door mechanism have been constructed for computer simulation. To design the bus door mechanism, we developed a simulation program, which automates the kinematic and dynamic analysis according to the input parameters of each linkage and the driving system. Using this program, we investigated the design parameters that affect the kinematic and dynamic characteristics of the bus door mechanism under various simulation conditions. In addition, simple examples are examined to validate the developed program.

• Journal of Biosystems Engineering
• /
• 제24권3호
• /
• pp.183-194
• /
• 1999

Using the dynamic model and simulation program TDA developed in the previous paper, effects of design parameters of an agricultural tractor-trailer system on its vertical seat vibrations were investigated. The tractor-trailer system was excited by traversing over a half-sine bump. The excitation frequencies were determined by traveling velocity of the tractor and a half-sine bump selected appropriately. TDA predicted the autospectra of the vertical seat accelerations with different values of design parameters and compared them to analyze their effects. The design parameters included positions of engine, cab, and seat mountings as well as their dynamic properties. The results of this study suggested guidelines with which an improved structure of tractor may be developed in the early stage of design for a better ride quality.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.1877-1882
• /
• 2000

In this paper, an integrated system for dynamic analysis and optimal design of engine mount systems is presented. The system can simulate static and dynamic behaviors of engine mount systems and optimize design parameters such as mount stiffness, mounting locations with desired design targets of frequency or displacement. A FF-engine with an automatic transmission is used to demonstrate the analysis and optimal design capabilities of the proposed design system.