• 한국CDE학회논문집
• /
• 제7권1호
• /
• pp.27-33
• /
• 2002

MDO(Multidisciplinary Design Optimization) methodology is a new technology to solve a complicate design problem with a large number of design variables and constraints. The design of a dental implant system is a typical complicate problem, and so it requires the MDO methodology. Actually, several analyses such as rigid body dynamic analysis and structural stress analysis etc. should be carried out in the MDO methodology application to the design of a dental implant system. In this paper, as a first step of MDO methodology application to the design of a dental implant system, the impact force which is applied on the tooth in masticating is calculated through the rigid body dynamic analysis of upper and lower jaw-bones. This analysis is done using ADAMS. The impact force calculated through the rigid body dynamic analysis can be used for the structural stress analysis of a dental implant system which is needed for the design of a dental implant system. In addition, the rigid body dynamic analysis results also show that the impact time decreases as the impact force increases, the largest impact force occurs on the front tooth, and the impact force is almost normal to the tooth surface with a slight tangential force.

• 방사성폐기물학회지
• /
• 제22권2호
• /
• pp.139-144
• /
• 2024

Concrete structures must maintain their shielding abilities and structural integrity over extended operational periods. Despite the widespread use of dry storage systems for spent nuclear fuel, research on the properties of deteriorated concrete and their impact on structural performance remains limited. To address this significant research gap, static and dynamic material testing was conducted on concrete specimens carefully extracted from the outer wall of the High-flux Advanced Neutron Application ReactOr (HANARO), constructed approximately 30 years ago. Despite its age, the results reveal that the concrete maintains its structural integrity impressively well, with static compression tests indicating an average compressive strength exceeding the original design standards. Further dynamic property testing using advanced high-speed material test equipment supported these findings, showing the consistency of dynamic increase factors with those reported in previous studies. These results highlight the importance of monitoring and assessing concrete structures in nuclear facilities for long-term safety and reliability.

• 소음진동
• /
• 제8권5호
• /
• pp.900-907
• /
• 1998

Rubber materials are extensively used in various machine design application, mainly for vibration/shock/noise control devices. Over the years an enormous effort has been put into developing procedures to provide properties of rubber material for design function. However, there are still a lot of difficulties in the understanding of dynamic characteristics of the rubber components in compression. In this paper, the dynamic characteristics of rubber materials for anti-vibration under compression were investigated. Dynamic and static tests for rubber material with 3 different hardness were performed. In dynamic tests, non-resonance method, impedance method, was used to obtain the complex modulus(storage modulus and loss factor) and the effects of static pre-strain on the dynamic characteristics were investigated. Also, a relation equation between linear dynamic and nonlinear static behavior of rubber material was discussed and its usefulness to predict their combined effects was investigated.

• Wind and Structures
• /
• 제20권1호
• /
• pp.95-115
• /
• 2015

Wind effects on roofs are usually considered by equivalent static wind loads based on the equivalence of displacement or internal force for structural design. However, for large-span spatial structures that are prone to dynamic instability under strong winds, such equivalent static wind loads may be inapplicable. The dynamic stability of spatial structures under unsteady wind forces is therefore studied in this paper. A new concept and its corresponding method for dynamic instability-aimed equivalent static wind loads are proposed for structural engineers. The method is applied in the dynamic stability design of an actual double-layer cylindrical reticulated shell under wind actions. An experimental-numerical method is adopted to study the dynamic stability of the shell and the dynamic instability originating from critical wind velocity. The dynamic instability-aimed equivalent static wind loads of the shell are obtained.

• 한국전문물리치료학회지
• /
• 제27권2호
• /
• pp.93-101
• /
• 2020

Background: For performing various movements well, cooperation between the muscles around the scapula and shoulder has been emphasized. Taping has been widely used clinically as a helpful adjunct to other physiotherapy methods for shoulder pathology and dysfunction treatment. Previous studies have evaluated the effect of taping techniques using dynamic tapes on shoulder function and pain. However, no study investigated the electromyographic (EMG) changes in the shoulder muscles. Objects: This study aimed to investigate the effect of the upper limb offload taping technique using a dynamic tape on EMG activities of the upper trapezius (UT), lower trapezius, serratus anterior (SA), and middle deltoid (MD) muscles during scaption plane elevation. Methods: A total of 26 healthy subjects (19.85 ± 6.40 years, male = 20) volunteered to participate in this study. The subjects were instructed to perform scaption elevation with and without dynamic taping on the shoulder. Shoulder elevation strength tests were performed at 100%, 75%, 50%, and 25%, for the maximal isometric contraction force. Results: There were statistically significant interaction effects between the taping application and shoulder scaption elevation force in EMG activities in the UT (p < 0.05) and MD (p < 0.05). EMG activities in the UT showed significant increases in 50%RVC (reference voluntary contraction, p < 0.05) and 25%RVC (p < 0.01). Furthermore, the EMG activity of the SA significantly increased in 50%RVC (p < 0.01) and 25%RVC (p < 0.01) after dynamic taping. For the MD, the EMG activity level significantly decreased in 100%RVC (p < 0.05). Conclusion: These results indicated that upper limb offload dynamic taping application affects the muscle activities of some shoulder muscles depending on different scaption elevation strength levels. Therefore, we suggest that the upper limb offload dynamic taping can be applied to the shoulders when patients need middle deltoid inhibition or upper trapezius facilitation, such as patients with shoulder impingement syndrome.

• 대한방사선기술학회지:방사선기술과학
• /
• 제42권1호
• /
• pp.53-59
• /
• 2019

In the field of nuclear medicine, the various static phantoms of international standards are used to assess the performance of the nuclear medicine equipment. However, we only reproduced a fixed situation in spite of the movement of the cardiac, and the demands for dynamic situations have been continuously raised. More research is necessary to address these challenges. This study used flexible materials to design the dynamic cardiac phantom, taking into account the various clinical situations. It also intended to reproduce the images through dynamic cardiac flow to confirm the usefulness of the proposed technique. The frame of dynamic cardiac phantom was produced based on the international standard phantom. A nuclear medicine dynamic cardiac phantom was produced rubber material and silicone implemented by 3D printing technique to reproduce endocardium and epicardium movement. Therefore we compared and evaluated the image of a cardiac phantom made of rubber material and a cardiac phantom made of silicone material by 3D printing technique. According to the results of this study, the analysis of the Summed Rest Score(SRS) showed abnormalities in the image of a cardiac phantom made of rubber material at 10, 20, and 30 stroke rates, but the image of a cardiac phantom made of silicone material by 3D printing technique showed normal levels. And the analysis of the Total Perfusion Deficit(TPD) showed that TPD in the image of a cardiac phantom made of rubber material was higher than that of the image of a cardiac phantom made of silicone material by 3D printing technique at 10, 20, and 30 stroke rates. The potential for clinical application of the proposed method was confirmed in the dynamic cardiac phantom implemented with 3D printing technique. It is believed that the objective information secures the reliability of inspection equipment and it contributes to improve the diagnostic value of nuclear medicine.

• 한국전산구조공학회논문집
• /
• 제15권1호
• /
• pp.21-32
• /
• 2002

일반적으로 응답스펙트럼 해석법은 건물의 지진해석에 널리 사용되고 있지만 기계하중이나 이동하중 등에 의하여 발생하는 진동에 대한 해석에는 시간이력해석이 주로 사용되고 있다. 그런데, 시간이력해석법은 정확한 반면 매우 복잡하고 어려우며 많은 시간을 필요로 한다. 따라서, 본 논문에서는 동적하중을 받는 구조물의 최대응답을 응답스펙트럼해석법을 이용하여 간편하게 계산하는 방법을 제시하고자 한다. 우선, 이 해석법의 해석과정에 대하여 알아보았으며, 복수절점에 동적 하중을 받는 경우에 대해서 해석시간 및 메모리를 줄이는 방법을 제시하였다. 다음으로는 이동하중을 받는 경우에 대하여 구조물의 최대응답을 구하는 방법에 대하여 알아보았다. 마지막으로 예제를 통하여 시간이력해석을 수행하여 얻은 최대응답과 응답스펙트럼해석에 의한 최대응답을 비교하여 제시한 해석법의 정확성을 확인하였다.

• Physical Therapy Rehabilitation Science
• /
• 제3권2호
• /
• pp.125-133
• /
• 2014

Objective: The aim of this study is to investigate the effect of patellar taping on balance and gait abilities in chronic stroke patients. Design: Randomized placebo-controlled trial. Methods: Thirty chronic stroke patients who have been diagnosed at least six months or before were recruited from R hospital. These study subjects were randomized to the experimental group (n=15) or placebo group (n=15). In the experimental group, patellar taping was applied while for the placebo group, placebo taping was applied. The Balance System SD was used for measuring dynamic standing balance in these two groups. In addition, the GAITRite (CIR System Inc.) system was utilized for calculating gait performance in these patients. Results: After application of taping, the patellar taping group showed a significant decrease in dynamic standing balance in their sway area (p<0.05). However, in the placebo group, there was no significant difference in dynamic standing balance ability and gait ability before and after application of taping. Comparison of the patellar taping group and placebo group showed significant differences in dynamic standing balance ability and gait performance (p<0.05). Conclusions: From the results of this study, it appears that application of patellar taping in chronic stroke patients significantly improved dynamic standing balance ability and gait ability in these patients. Based on these results, patellar taping is thought to be useful in real clinical settings where there are many chronic patients who are in need of improvement in their balance and gait ability.

• 대한통합의학회지
• /
• 제10권1호
• /
• pp.73-79
• /
• 2022

Purpose : Kinesio taping applied to the ankle varies, and if the overall ankle is taped as much as possible, several effects, including balance, can be expected, but clinically the cost reduction for intervention is very important. Therefore, this study attempted to find out the optimal way to the effect and cost of kinesio taping on ankle dynamic balance. Methods : The subject of this study was 24 university students in their 20s (male: 13, female: 11), who received sufficient explanation of the purpose and method of the study. The Cumberland ankle instability tool (CAIT) questionnaire was used for the degree of ankle instability of the study subjects. If the subject's CAIT score was 28 points or more, it was classified as a stable ankle, and if the score was 24 points or less, it was classified as functional ankle instability (FAI). In this study, Biodex Balance System^® measurement equipment was used to calculate the dynamic balance of study participants. The application of kinesio taping was performed by one physical therapist to attach in the same way, and a method of wrapping the ankle joint was applied in the eight-shaped bandage. Results : The results are as follows in before and after taping of the stable ankle and FAI group. There was no significant difference in the overall, anterior-posterior, and medial-lateral stability index. The comparison is as follows between groups for the differences (post-pre value) in before and after the application of kinesio taping. There were no significant differences between groups in all the overall, anterior-posterior, and medial-lateral stability index. Conclusion : In this study, no significant difference in kinesio taping was found in the dynamic balance of stable ankle and FAI (overall, anterior-posterior, and medial-lateral). It is necessary to continue to study ways to find the maximum effect while minimally attaching them to the application method of ankle kinesio taping.

• ETRI Journal
• /
• 제42권3호
• /
• pp.433-445
• /
• 2020

A denial-of-service (DoS) attack is a serious attack that targets web applications. According to Imperva, DoS attacks in the application layer comprise 60% of all the DoS attacks. Nowadays, attacks have grown into application- and business-layer attacks, and vulnerability-analysis tools are unable to detect business-layer vulnerabilities (logic-related vulnerabilities). This paper presents the business-layer dynamic application security tester (BLDAST) as a dynamic, black-box vulnerability-analysis approach to identify the business-logic vulnerabilities of a web application against DoS attacks. BLDAST evaluates the resiliency of web applications by detecting vulnerable business processes. The evaluation of six widely used web applications shows that BLDAST can detect the vulnerabilities with 100% accuracy. BLDAST detected 30 vulnerabilities in the selected web applications; more than half of the detected vulnerabilities were new and unknown. Furthermore, the precision of BLDAST for detecting the business processes is shown to be 94%, while the generated user navigation graph is improved by 62.8% because of the detection of similar web pages.