• Journal of Environmental Health Sciences
• /
• v.30 no.3
• /
• pp.185-190
• /
• 2004

Acute aquatic toxicity of effluents discharged from five dyeing plants in Gyeong-gi province were evaluated to assess whether the current Korean water quality standards(KWQS) could protect aquatic life. Chemical analyses of all parameters regulated under KWQS, except for E-coli, were also carried out to determine regulation compliance of the samples. All the effluent samples were satisfied with KWQS except for the color in only one sample. In acute Daphnia magna toxicity tests, significant mortality was observed in one of five samples and EC50 was 12.1%(95% confidence interval 9.1-16.2), which was in compliance with KWQS. The result of the Microtox assay indicated that acute microbial toxicity existed in effluents from three out of five plants, two of which were in compliance with KWQS. The agreement between regulation compliance of chemical concentrations of effluent and observed toxicity from various biological toxicity tests was very poor to fair (kappa = 0.194~0.250). The data presented suggest that exposure to dyeing wastewater which were in compliance with Korean water quality standards may not be safe to aquatic biota, and multiple tropical levels should be considered in aquatic toxicity monitoring of dyeing industry.

• Fashion & Textile Research Journal
• /
• v.25 no.6
• /
• pp.673-689
• /
• 2023

To realize the traceability of sustainable textile products, this study presents a low-carbon process through energy savings in the textile material manufacturing process. Traceability is becoming an important element of Life Cycle Assessment (LCA), which confirms the eco-friendliness of textile products as well as supply chain information. Textile products with complex manufacturing processes require traceability of each step of the process to calculate carbon emissions and power usage. Additionally, an understanding of the characteristics of the product planning-manufacturing-distribution process and an overall understanding of carbon emissions sources are required. Energy use in the textile material manufacturing stage produces the largest amount of carbon dioxide, and the amount of carbon emitted from processes such as dyeing, weaving and knitting can be calculated. Energy saving methods include efficiency improvement and energy recycling, and carbon dioxide emissions can be reduced through waste heat recovery, sensor-based smart systems, and replacement of old facilities. In the dyeing process, which uses a considerable amount of heat energy, LNG, steam can be saved by using "heat exchangers," "condensate management traps," and "tenter exhaust fan controllers." In weaving and knitting processes, which use a considerable amount of electrical energy, about 10- 20% of energy can be saved by using old compressors and motors.

• Science of Emotion and Sensibility
• /
• v.11 no.1
• /
• pp.123-129
• /
• 2008

The purpose of this study is to analyse the effect of weaving preparatory process characteristics on the PET fabric sensibility through assessment of handle, garment formability and sewability for the enhancement of the physical property of the PET fabrics. For this purpose, eleven fabric specimens processed on the interlacing, pirn winder, 2-for-1 twister, weaving and dyeing and finishing processes were prepared and processing tension and interlacing intensity after each process were measured with various processing conditions.

• Journal of Conservation Science
• /
• v.35 no.1
• /
• pp.1-10
• /
• 2019

This study provides a comprehensive evaluation of general characteristics of sized silk fabrics for the painting purpose. Two particular types of silk fabrics used for painting background were compared: a recreation of historical material and a mass produced material of present day. The sizing process made the surface characteristics of the silk fabrics more suitable for painting. The dyeing properties of the fabrics were related to the surface area of the fabrics, and had no significant effect on their mechanical properties. The antibacterial activity of the tannin-based natural dyestuffs were maintained after the sizing. The performance assessment by the KES-FB system showed that the fabrics are more prone to deteriorate after the sizing because the glue layer receives the most of the physical stresses.

• Ocean Science Journal
• /
• v.40 no.2
• /
• pp.91-100
• /
• 2005

Bioassay using the marine bacteria, Vibrio fischeri and rotifer, Brachionus plicatilis, and chemical analyses were conducted to assess the toxicity of the various sewage sludges, one of the major ocean dumped materials in the Yellow Sea of Korea. Sludge elutriates extracted by filtered seawater were used to estimate the ecotoxicity of the sludge. Chemical characterization included the analyses of organic contents, heavy metals, and persistent organic pollutants in sludge. Bacterial bioluminescent inhibition (15 min), rotifer mortality (24 hr) and rotifer population growth inhibition (48 hr) assay were conducted to estimate the sludge toxicity. EC50 15 min (inhibition concentration of bioluminescence after 15 minutes exposed) values by Microtox(R) bioassay clearly revealed different toxicity levels depending on the sludge sources. Highest toxicity for the bacteria was found with the sludge extract from dyeing waste and followed by industrial waste, livestock waste, and leather processing waste. Clear toxic effects on the bacteria were not found in the sludge extract from filtration bed sludge and rural sewage sludge. Consistent with Microtox(R) results, rotifer neonate mortality and population growth inhibition test also showed highest toxicity in dyeing waste and low in filtration bed and rural sewage sludge. High concentrations of persistent organic pollutants (POPs) and heavy metals were measured in the samples from the industrial wastes, leather processing plant waste sludge, and urban sewage sludge. However, there was no significant correlation between pollutant concentration levels and the toxicity values of the sludge. This suggests that the ecotoxicity in addition to the chemical analyses of various sludge samples must be estimated before release of potential harmful waste in the natural environment as part of an ecological risk assessment.

• Korean Journal of Human Ecology
• /
• v.16 no.5
• /
• pp.979-986
• /
• 2007

The purpose of this study is to investigate the dyeability, and the hand of soybean/cotton blended fabric after dyeing with natural and synthetic dyes. Soybean/cotton blended fabrics dyed with extracted solution from turmeric, sappan wood, gardenia and synthetic dyes(weak-acid dyes, reactive dyes, direct dyes). The hand value of soybean/cotton blended fabrics dyed with 6 different dyes was measured using Kawabata Evaluation System. The results are as follows; 1. The K/S value of the soybean/cotton blended fabric dyed with sappan wood extracts was the highest. 2. The color fastness of the soybean/cotton blended fabric dyed with reactive dyes was excellent. The fastness to the light of the same fabric was much better than the other fabrics. 3. Linearity of load-extension and tensile energy of the soybean/cotton blended fabric dyed with sappan wood extracts showed very high. Shear stiffness of the soybean/cotton blended fabric dyed with weak-acid dyes was much higher than that of fabric of dyed with reactive dyes. Bending property of the fabrics dyed with natural colorants(sappan wood, gardenia) showed very high, but that the fabric dyed with reactive dyes was very poor. 4. In the primary hand value, stiffness and anti-drape stiffness of the fabric dyed with weak-acid dyes showed the highest. Fullness and softness of the fabric dyed with weak-acid dyes showed very low.

• Journal of Environmental Impact Assessment
• /
• v.24 no.6
• /
• pp.549-560
• /
• 2015

The priorities of siting restriction was derived from quantification of environmental hazard according to industrial classification based on 'Chemical Ranking and Scoring System(CRS)' which is handling the discharge characteristics of 31 industrial classifications regulated from locating at 'Industrial Complex in Rural Area(ICRA)'. CRS that is utilizing the data of 'Pollutant Release and Transfer Registers(PRTR)' is applied to determine human health risk and ecological risk which are calculated by discharged amount and materials $LC_{50}$ according to water, soil and air media based on industrial classification. From this process, exposure assessment and toxicity assessment for integrating the adverse environmental impact and the mitigation effect of environmental risk according to the development of environmental technologies into establishing the rational landuse management method for the 31 industrial classifications regulated from locating at ICRA was analyzed. From the assessment result of the siting restriction removal at ICRA for 31 industrial classifications, based on 2012 year reference 6 industries that includes Manufacture of Guilt Coloration Surface Processing Steel Materials, Manufacture of Biological Product, Manufacture of Smelting Refining and Alloys of Copper, Dyeing and Finishing of Fibers and Yarns, Manufacture of Other Basic Iron and Steel n.e.c., Rolling Drawing and Extruding of Non-ferrous Metals n.e.c. are calculated as having relatively lower environmental hazards, thus it is judged that the siting restriction mitigation at ICRA is possible for the 6 industrial classifications that are not discharging the specific hazardous water contaminants during manufacturing process.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.38 no.1
• /
• pp.73-86
• /
• 2014

Persimmon juice dye-printed fabrics with printing were used for a Galot one-piece dress. The Galot dress was assessed in comparison to a white undyed one-piece dress of the same design through a wearing test conducted in a climatic chamber with an air temperature of $30{\pm}1^{\circ}C$, $50{\pm}5%$ R.H, and 0.2m/sec air movement on 4 healthy female subjects in their 20s. The subjects went through a 30-min stable period, a 30-min exercise of walking on a $5^{\circ}$ slope treadmill at 70m/min period, and a 20-min recovery period. In addition, a physiological reaction and subjective sensation were estimated. The results showed that significant differences were mostly observed from a sweating period that occurred during the latter half of the exercise. More specific results are as follows. First, skin temperature on the chest and mean skin temperature were significantly higher (p<.01) in rayon dyed sample dresses. Second, micro-humidity on the back showed a significant difference (p<.01). Both cotton and rayon persimmon juice dyed sample dresses produced lower microhumidity than their counterparts and as for cotton the difference occurred over the entire experimental period; however, it occurred after the middle of the exercise period for rayon. Third, the sweating rate on the back decreased in both cotton and rayon with persimmon juice dye but no significant difference was observed. Fourth, subjective three sensations revealed significant differences between cotton and rayon (p<.01), indicating that the subjects felt more cool, dryer and more comfortable in a cotton Galot. As described above, the analysis of physiological responses and the subjective sensation of undyed and dyed clothing shows the effect of persimmon juice dyeing. Persimmon juice dyeing also seemly increased air permeability, moisture regain and permeability facilitating body heat ventilation, as micro-humidity and sweat rate were lowered. However, this was not shown consistently in subjective responses on comfort especially when wearing rayon dresses.

• The Korean Journal of Community Living Science
• /
• v.19 no.1
• /
• pp.3-10
• /
• 2008

This study was conducted to gather basic data on the physiological activities of flower extracts from 4 cultivars of white lotus to promote the increase of public consumption. Four cultivars of white lotus: c.v. 'Garam', 'Choeue', 'Baekhwageonryeon', and 'Seungdal' were harvested on 14, August, 2007, and the physiological activities of flower extracts obtained by hot water extraction and ethanol extraction were examined. Total phenol content was highest in the 'Garam' flower hot water extracts, $144.2{\mu}g{\cdot}mL^{-1}$, and lowest in the 'Seungdal' flower ethanol extracts, $63.4{\mu}g{\cdot}mL^{-1}$. DPPH radical scavenging activity was highest at 2,000ppm flower extract of 'Garam' obtained by hot water extraction and ethanol extraction of 90.9% and 83.0%, respectively. Total flavonoid content in the flower extracts of 'Garam' obtained by hot water extraction and ethanol extraction showed the highest levels at $34.1{\mu}g{\cdot}mL^{-1}\;and\;33.9^{\mu}g{\cdot}mL^{-1}$, respectively. Nitrite scavenging activity at 1,000ppm flower extract was highest in 'Garam'. Extracts obtain by hot water and ethanol showed 91.3% and 80.4% activity, respectively. No significant difference in tyrosinase inhibition activity was observed among the cultivars or as a result of extraction method. Overall anti-microbial activity of the flower extracts was slightly higher in 'Garam' than in the other cultivars.

• Journal of Fashion Business
• /
• v.16 no.4
• /
• pp.29-45
• /
• 2012

The purpose of this study is for providing not only the latest design technique trend for zero waste fashion, but information about creative fashion design education through eco-fashion industry trend in globally and domestic which is focusing on eco-fashion labelling. The research were processed with literature related eco, sustainable, green fashion books, former articles, newspapers, and web sites. The results as follows; The certification about eco-fashion product is moving to 'Life Cycle Assessment' from focused on primary process like material, finishing, dyeing. Especially simplicity of process means reducing the wastes. And fabric wastage for adult outwear was estimated 15% percent of total fabric used in general design studios. Three cases for Zero waste fashion were as follows; First, Jigsaw puzzle by Timo Rissane and Mark Liu were different zero waste methods, but the result was same. Rissene's method was based on traditional cutting like 'cut and sew' but traditional cutting can lead to design that have an abundance of fabric and drape. Jigsaw of Rissene was approached with description a pattern-cutting technique in which all piece interlock with each other generating no waste from design production. Another Jigsaw by Liu was related with innovative textile design. DTP makes the possibilities for zero waste garment production almost endless. The dress intricately cut from 10 pieces, wastes none of the fabric required to make it. Second, Subtraction Cutting by Julian Roberts provides unexpected fluid, organic forms and zero waste fabric. Utilizing Roberts plug(tunnel) technique enables any part of the garment that is removed for fit or aesthetics to be reincorporated into the design of garment. Third was 'Bio Couture' by Suzanne Lee. She has created garments from cellulose bacteria which grow in a bathtub using only green methods addressing in such as way ecological issues and exploring the future of fashion design in conjunction with technology.