• 한국신재생에너지학회:학술대회논문집
• /
• 2008.05a
• /
• pp.422-424
• /
• 2008

A serious problem of the 21st century is the supply of energy resources. Reserves of fossil fuels are facing depletion: renewable energy resources must be developed in this era. Dye sensitizedsolar cells(DSC) have been very economical and easy method to convert solar energy to electricity. DSC can reach low costs in future outdoor power applications. However, to commercialize the DSC, there are still many shortages to overcome. When the DSC is commercialized in the near future, the productivity is an important factor. In the process of soaking in a dye, it usually takes $12\sim24$ hours. In this study, we varied the dye coloring temperature from $0^{\circ}C$ to $60^{\circ}C$. At the temperature of $40^{\circ}C$, DSC cell showed the best performance. We also expect the reduction of the time soaking in a dye. Counter electrode surface of DSC is deposited by RF magnetron sputtering under the conditions of Ar $2.8{\times}10^{-3}$ torr, RF power of 120W and substrate temperature of $100^{\circ}C$.

• Textile Coloration and Finishing
• /
• v.31 no.3
• /
• pp.155-164
• /
• 2019

This study comparatively analyzed hair bleaching and degree of damage by the temperature of a heating tool after coloring hair with a permanent, semi-permanent or plant hair dye. According to analysis by spectrophotometer, 'semi-permanent hair dye' was the highest, followed by 'permanent hair dye' and 'plant hair dye' in terms of changes in $L^*$ values. In terms of changes in hair shape when analyzed using FE-SEM, 'semi-permanent hair dye($150^{\circ}C$ or lower)' was the greatest, followed by 'plant hair dye($180^{\circ}C$ or lower)' and 'permanent hair dye($200^{\circ}C$ or lower)'. Therefore, it is reasonable to flat iron hair at low temperature. According to the test, amino acid values gradually decreased in both bleached and colored hair. The results obtained through TGA-based thermal analysis confirmed that as brightness increases, hair moisture contents decrease. This study aimed to protect hair by suggesting a correct use of a flat iron by the hair dye type during hair coloring. It appears that the study results would help hairdressers minimize hair damage by using a hair dye at proper temperature.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1279-1280
• /
• 2008

A serious problem of the 21st century is the supply of energy resources. Reserves of fossil fuels are facing depletion: renewable energy resources must be developed in this era. Dye sensitized solar cells(DSC) have been very economical and easy method to convert solar energy to electricity. DSC can reach low costs in future outdoor power applications. However, to commercialize the DSC, there are still many shortages to overcome. When the DSC is commercialized in the near future, the productivity is an important factor. In the process of soaking in a dye, it usually takes 12${\sim}$24 hours. In this study, we varied the dye coloring temperature from 0$^{\circ}C$ to 60$^{\circ}C$. At the temperature of 40$^{\circ}C$, DSC cell showed the best performance. We also conducted the time variant experiment to reduce the manufacturing time. Counter electrode surface of DSC is deposited by RF magnetron sputtering under the conditions of Ar $2.8{\times}10^{-3}torr$, RF power of 120W and substrate temperature of 100$^{\circ}C$.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.39 no.4
• /
• pp.601-612
• /
• 2015

This research investigated the dyeing behavior of palmatine (a major coloring compound of Phellodendron bark in addition to berberine) using mercerization (M), tannic acid (T), mercerization-tannic acid (MT), and tannic acid -mercerization (TM) pretreatments. Mercerization was conducted using $20^{\circ}C$ of 20% NaOH for 5 minutes. Tannic acid treatment was conducted using 15% o.w.f. solution of tannic acid at $60^{\circ}C$ for 30 minutes and fixed with potassium antimonyl tartrate trihydrate. Dyeing was conducted using 1% o.w.f. palmatine chloride hydrate with 1:100 liquor ratio at $10-95^{\circ}C$ for 10-60 minutes in a dyebath of pH 3-9. MT method resulted in the highest dye uptake and was two times higher than the average dye uptake of T method. MT method provided the best result when the dyeing temperature was $80^{\circ}C$ or $95^{\circ}C$ and the dyeing time was 60 minutes. The pH of the dyebath had less effect on the dye uptake but a pH higher than 5 provided better results. The study confirmed that palmatine is a major coloring compound of Phellodendron bark and that the MT method can be used as a successful cotton dyeing method.

• Fashion & Textile Research Journal
• /
• v.7 no.5
• /
• pp.547-552
• /
• 2005

The study has objective in raising value of the gray color as a meaningful color suiting sentiments of modern people by expressing the gray color in various perspective utilizing natural dyes that is natural at the same time having aesthetic color tones. For example, the main ingredient used for coloring black and gray color is the pyrogallol tannin and the gray tone dye can be acquired by combining the tannin with iron. In order to find the suitable condition for processing tannin, UV-Vis part absorption spectrum of Gallapple pyrogallol tannin, dye ability based on temperature and time, reflection rate based on concentration, color changes based on acid treatment and alkali treatment, changes on surface based on concentration or metal mordant condition, and lightfastness were measured. Maximum absorption wavelength (${\lambda}_{max}$) of Gallapple tannin was at around 273 nm, while strong absorption was also observed at below 350 nm. Dye ability of Gallapple tannin is done more easily on silk rather than cellulose fibers such as cotton, while the optimum condition for dyeing was observed to be at $60^{\circ}C$, for 20 minutes. As a result of acid treatment, the color of dye material consist highly of gray tones and showed red tone after the alkali treatment. While it was observed that as dye concentration and metal mordant concentration increased the color changed at counter-clockwise direction on the Y-scale of Munsell's scale of colors. Lightfastness was more on a normal fading. I hope this study opens up possibilities towards presenting gray color expressed from tannin as color with diversity and aesthetic value. In future, comparative study between dye expressed from catechol tannin dye materials will be helpful.

• Textile Coloration and Finishing
• /
• v.19 no.6
• /
• pp.1-6
• /
• 2007

Opuntia Ficus has been an epiphyte plant since it was introduced in Cheju island as an ornamental plant two hundred years ago. And now it is grown as many as it is designated to local souvenir No.35. The fruit of this plant contains red-purple sap, which is due to be used in coloring clothes. This study aims at confirmation of use possibility as eco-friendly dyeing stuffs on extract from opuntia ficus fruits and contributing to the practical use of natural dyeing. Thus this study was investigated the dyeability of extract from opuntia ficus fruits on the silk fabric. Antioxidants were used ascorbic acid, L-cysteine, prophyl gallete. After dyeing, K/S and dye fastness were measured. The results were as follows; Maximum absorption band of extract from opuntia ficus fruits was 534.5nm. The appropriate dyeing condition was bath ratio 50:1, dyeing temperature $30^{\circ}C$, dyeing concentration 50%, dyeing time 50min, pH 3,concentration of all antioxidants 3%. Addition of antioxidants brought increase of K/S value. And K/S value and dye fastness had the greatest value when ascorbic acid was added

• Journal of Digital Convergence
• /
• v.16 no.12
• /
• pp.593-602
• /
• 2018

The purpose of this study was to investigate the coloring properties of non-mordant dyes by examining local literature on silk fabric dyeing using red-colored natural dyes. Natural dyes can be prepared from the following 8 materials: purple-fleshed sweet potato, Impatiens balsamina, mulberry, fruits of Ligustrum japonicum Thunb, guava leaves, dansam, hibiscus flowers, and pruned branches of Prunus persica. To examine the surface color calculated $L^*$, $a^*$, $b^*$, ${\Delta}E^*$, and K/S value and H V/C. The variables considered in the dyeing experiment were dye concentration, dyeing temperature, dyeing time, and number of dyeing iterations, which were varied to evaluate the dyeing properties and color characteristics. As a result, the abovementioned variables, dye affinity, and red color expression were directly proportional to one another. In this study, it was found that red coloring can be obtained with natural dyes; moreover, excellent dyeing was achieved without the need for repeated dyeing or mordanting processes, which cause environmental pollution.

• Journal of the Korea Convergence Society
• /
• v.12 no.11
• /
• pp.427-434
• /
• 2021

Modern people express their beauty through hair coloring, but hair can be damaged by repeated chemical treatments. In order to increase the durability of dyeing and minimize the hair damage, in this study, the acidic amino acids including aspartic acid (Asp) and glutamic acid (Glu) were used to post-treat hair during hair coloring. The post-treatment with 0.75% Asp and Glu solution was carried out at room temperature for 20 minutes after dyeing bleached hair with cherry red and blue silver colors. After repeated shampooing of 1, 5, 10, 15, 20, and 25 times, L^*a^*b^* value of dyed hair was measured to confirm the dyeing durability, and the changes in tensile strength, porosity, and surface properties of the hair were also analyzed to determine the condition of the hair. In the case of cherry red and blue silver staining, the Asp and Glu experimental group showed higher color persistence than the control group, and the Asp and Glu experimental group showed higher tensile strength, lower porosity and smooth surface properties than the control group. In particular, the Asp test group showed superior color persistence and lower hair damage than the Glu test group. This study, therefore, if damaged in dyeing and bleaching in the field of hair after treatment with asp glu a combination of hair cosmetics in the development of basic data look forward to be.

• Journal of the Korea Convergence Society
• /
• v.12 no.7
• /
• pp.61-67
• /
• 2021

The purpose of this study was to investigate the colors of spectacle lenses that would be effective in blocking blue light among various colors so that the damage caused by blue light could be conveniently reduced even in daily life and when filling with dental light-curing resin. Each color dye of orange, brown, gray, yellow, red, and rosa was dissolved in an individual container of a spectacle lens tinting machine, and 6 uncolored spectacle lenses were immersed in a temperature of 90℃ for 1 hour to color. As a result of comparing the blue light transmittance of the colored spectacle lens and the tip for the photopolymerizer, the blue light transmittance of the orange colored lens was 0.82%, and the blue light blocking effssect was the best. Brown and gray tinted lenses had excellent blue light blocking rate, but it was difficult to recognize objects through the lens due to the high tinted concentration, and yellow tinted lenses were found to be effective when the tint was similar to the tip. The blue tinted lens had a blue light transmittance of 15.10%, which was lower than other tinted lenses. The results of the experimental study are expected to be helpful in recognizing the blue light transmittance by spectacle tinted lenses of various colors and making efforts to select the appropriate blue light blocking lens color and block harmful blue light stimuli.

• Current Research on Agriculture and Life Sciences
• /
• v.31 no.1
• /
• pp.56-60
• /
• 2013

This research was carried out to produce rainbow-colored roses from white cut rose, Rosa hybrida 'Denice', to meet customers' desire of having various colors of roses. The higher temperature of dyeing solution used, the faster coloring time surveyed. In high temperature, the flowering speed of cut flower accelerated and after treating more than 4 hours, the edges of flowers became too dark or dry. In the condition of concentration of dyeing solution, $11g{\cdot}L^{-1}$ dyed faster than $7.5g{\cdot}L^{-1}$, however, no differences between $15g{\cdot}L^{-1}$ and $11g{\cdot}L^{-1}$ have observed. It looked fast coloration at the stage of early blooming, but all three different petal opening stages need similar time to get even coloration from outer to inner petals. For the consideration of commercial value, flowers with 3-4 petals opened are better quality than flowers with less petals opened. It was possible to make rainbow-colored rose by dipping 'Denice' with 3 primary color combination, Hot Pink, True Blue, and Yellow dyes, at the best result conditions of $20^{\circ}C$ solution temperature, 3-4 petals opening stage, 11g/L concentration of dye solution and 3 hours dipping, respectively.