• International Journal of Naval Architecture and Ocean Engineering
• /
• v.7 no.3
• /
• pp.540-558
• /
• 2015

Maneuvering oblique towing test is simulated in a Computational Fluid Dynamic (CFD) environment to obtain the linear and nonlinear velocity dependent damping coefficients for a DTMB 5512 model ship. The simulations are carried out in freely accessible OpenFOAM library with three different solvers, rasInterFoam, LTSInterFoam and interDyMFoam, and two turbulence models, $k-{\varepsilon}$ and SST $k-{\omega}$ in presence of free surface. Turning and zig-zag maneuvers are simulated for the DTMB 5512 model ship using the calculated damping coefficients with CFD. The comparison of simulated results with the available experimental shows a very good agreement among them.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.32 no.3
• /
• pp.181-189
• /
• 2008

GaAs film growth process from trimethylgallium(TMGa) and tertiary-butylarsine(TBAs) using a horizontal MOCVD reactor was numerically studied to explain the experimental result that the decreasing surface reaction rate as the increasing partial pressure of group III species. Using the non-linear model based on the Langmuir isotherm which considers the adsorption and desorption of molecules, film deposition over the entire reactor scale was predicted by computational fluid dynamics (CFD) with the aid of the parameters obtained from the selective area growth (SAG) technique. CFD Results using the non-linear surface reaction model with the parameters determined from the SAG experiments predicted too high film growth rate compared to the measured values at the downstream region where the temperature was decreased abruptly. The pairs of ($k_s^n$, K) from the numerical simulations was $(2.52{\times}10K^{-6}mol/m^2/s,\;1.6{\times}10^5m^3/mol)$, whereas the experimentally determined was $(3.58{\times}10^{-5}mol/m^2/s,\;6.9{\times}10^5m^3/mol)$.

• Journal of the Korean Magnetics Society
• /
• v.24 no.6
• /
• pp.197-201
• /
• 2014

As the importance of rare metal is increasing globally, Japan introduced the concept of Strategic Elements in 2004, and started Strategic Elements Project in 2007. The Goal of this project run by MEXT (Ministry of Education, Culture, Sports, Science and Technology) is to develop high-function materials and components that do not use rare or harmful elements by studying the role and characteristics of the elements that compose materials and components and decide their functions and characteristics. In September 2010, Japanese coast guard arrested a Chinese fishing boat near Senkaku Islands (Diaoyudao Islands by China), which escalated to the territory issue and eventually a big diplomatic and economic conflict. In order to put pressure on Japanese Government, China used an economic option, which is the ban of rare earth export to Japan. This incident doubled Japan's motivation to develop Strategic Elements and put more efforts into this Project. MEXT set the following three research areas in February 2012: Study of alternative materials using sufficient and harmless elements, Study of applications for the high-functions of Strategic Elements, Study of practical design for components using Strategic Elements. Through a course of gathering the opinion of professionals, MEXT settled down with the following 4 research and study areas for the Strategic Elements Project in June 2012. 1. Magnetic materials to replace Dy, Nd. 2. Catalyst/Battery materials to replace Pt, Rh/Li, Co. 3. Electronic materials to replace In, Ta. 4. Structural materials to replace Nb, Mo. This paper deals with the first area and reviews the results of the research and study as of now.

• Journal of the Korean Mathematical Society
• /
• v.58 no.6
• /
• pp.1327-1345
• /
• 2021

In this paper, we are concerned with a Liouville-type result of the nonlinear integral equation of Chern-Simons-Higgs type $$u(x)=\vec{\;l\;}+C_{\ast}{{\displaystyle\smashmargin{2}{\int\nolimits_{\mathbb{R}^n}}}\;{\frac{(1-{\mid}u(y){\mid}^2){\mid}u(y){\mid}^2u(y)-\frac{1}{2}(1-{\mid}u(y){\mid}^2)^2u(y)}{{\mid}x-y{\mid}^{n-{\alpha}}}}dy.$$ Here u : ℝⁿ → ℝ^k is a bounded, uniformly continuous function with k ⩾ 1 and 0 < α < n, $\vec{\;l\;}{\in}\mathbb{R}^k$ is a constant vector, and C_* is a real constant. We prove that ${\mid}\vec{\;l\;}{\mid}{\in}\{0,\frac{\sqrt{3}}{3},1\}$ if u is the finite energy solution. Further, if u is also a differentiable solution, then we give a Liouville type theorem, that is either $u{\rightarrow}\vec{\;l\;}$ with ${\mid}\vec{\;l\;}{\mid}=\frac{\sqrt{3}}{3}$, when |x| → ∞, or $u{\equiv}\vec{\;l\;}$, where ${\mid}\vec{\;l\;}{\mid}{\in}\{0,1\}$.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.6
• /
• pp.1679-1683
• /
• 2013

Intergrowth perovskite type complex oxides $La_{0.8}Ln_{0.2}Sr_2MnCrO_{7-{\delta}}$ (Ln=La, Nd, Gd, and Dy) have been synthesized by sol-gel method. Rietveld profile analysis shows that the phases crystallize with tetragonal unit cell in the space group I4/mmm. The unit cell parameters a and c decrease with decreasing effective ionic radius of the lanthanide ion. The magnetic studies suggest that the ferromagnetic interactions are dominant due to $Mn^{3+}$-O-$Mn^{4+}$ and $Mn^{3+}$-O-$Cr^{3+}$ double exchange interactions. Both Weiss constant (${\theta}$) and Curie temperature ($T_C$) increase with decreasing ionic radius of lanthanide ion. It was found that the transport mechanism is dominated by Mott's variable range hopping (VRH) model with an increase of Mott localization energy.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.419-422
• /
• 2001

The electrical properties of Pr$_{6}$O$_{11}$-based ZnO varistors composed of ZnO-Pr$_{6}$O$_{11}$-CoO-Cr$_2$O$_3$-Dy$_2$O$_3$- based ceramics were investigated with CoO content in the range of 0.5~5.0 mol%. As CoO content is increased, the average grain size and the density were increased in the range of 9.86~27.22 $\mu$m and in the range of 5.25-5.55 g/cm$^3$, respectively. The varistor voltage was decreased in the range of 235.32~86.01 V/mm due to the increase of average grain size with CoO content. The varistors doped with CoO in the rage of 1.0~2.0 mol% exhibited a high nonlinearity, in which is above 55 in the nonlinear exponent and below 1.5 $\mu$A in the leakage current. Increasing CoO content further greatly decreased the nonlinearity.ity.ity.

• Journal of the Korean Ceramic Society
• /
• v.46 no.2
• /
• pp.146-154
• /
• 2009

It is necessary to minimize the thickness of Ni inner electrode layer and to improve the coverage of inner electrode, for the purpose of developing the ultra high-capacity multi layered ceramic capacitor (MLCC). Thus, low temperature sintering of dielectric $BaTiO_3$ ceramic should be precedently investigated. In this work, the relationship between dielectric properties of MLCC and batch condition such as mixing and milling methods was investigated in the $BaTiO_3$(BT)-Dy-Mg-Ba system with borosilicate glass as a sintering agent. In addition, several chip properties of MLCC manufactured by low temperature sintering were compared with conventionally manufactured MLCC. It was found that low temperature sintered MLCC showed better DC-bias property and lower aging rate. It was also confirmed that the thickness of Ni inner electrode layer became thinner and the coverage of inner electrode was improved through low temperature sintering.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.20 no.1
• /
• pp.156-162
• /
• 2006

In the present study, the author intended to investigate whether two oriental medical prescriptions named GSGT and GCPT significantly affect mucin release from cultured hamster tracheal surface epithelial (HTSE) cells. Confluent HTSE cells were metabolically radiolabeled with 3H-glucosamine for 24 hrs and chased for 30 min in the presen+ce of GSGT or GCPT to assess the effect of each agent on 3H-mucin release. Possible cytotoxicities of each agent were assessed dy measuring lactate dehydrogenase(LDH) release. Also, the effects of GSGT and GCPT on contractility of isolated tracheal smooth muscle were investigated. (1) GSGT did not affect mucin release without cytotoxicity ; (2) GCPT significantly stimulated mucin release from cultured HTSE cells, with significant cytotoxicity ; (3) GSGT and GCPT did not affect contractility of isolated tracheal smooth muscle. We suggest that the effects of GCPT and its components should be further investigated and it is of great value to find, from oriental medical prescriptions, novel agents which have potent expectorant effects on mucin secretion from airway goblet cells.

• Korean Journal of Plant Tissue Culture
• /
• v.24 no.1
• /
• pp.37-41
• /
• 1997

The in vitro regeneration and genetic transformation systems in hot pepper(Capsicum annuum L.) have not been routinely available, which has been a major limiting factor in the application of new genetic manipulations. An efficient procedure to regenerate whole pepper plants and to generate transgenic plants expressing a foreign gene was established. A relatively high frequency of plant regeneration was observed when hypocotyl and cotyledon explants were cultured on MS medium supplemented with NAA 0.1 mg/L plus zeatin 2.0 mg/L or IBA 10.0 mg/L plus BAP 1.0 mg/L. Addition of AgNO$_3$5 $\mu$M to these media improved the regeneration frequency up to 8%. For plant transformation, hypocotyl and cotyledon explants of hot pepper were precultured on shoot induction media without kanamycin added for 2 days, and then cocultured with Agrobacterium tumefaciens pDY183 for 2 days. Putative transformants were obtained from selection media containing 100 mg/L kanamycin sulfate and 500 mg/L carbenicillin. Putatively selected transformants were confirmed by amplification of selectable marker genes (ADA and NPT II) by polymerase chain reacion. Successful transcripts of ADA gene were detected by Northern blot analysis. Enzyme activity of ADA was also examined by spectrophotometric analysis, and expression of ADA gene in hot pepper suggests the potential application of ADA gene as a selectable marker in plants.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.4
• /
• pp.483-491
• /
• 2021

The purpose of this study is to analyze the economic effect of the use of recycled aggregate on the construction industry and the effect of increasing the value of the recycled aggregate production industry on the premise of supporting quality assurance technology to promote the high-quality use of recycled aggregate. Accordingly, the production cost of ready-mixed concrete that can be obtained through the use of high-quality recycled aggregate is analyzed according to the recycled aggregate application rate recommended in the recycled aggregate quality standard, The economic effect of general ready-mixed concrete and recycled aggregate-applied rea dy-mixed concrete industry wa s a na lyzed by identifying the domestic rea dy-mixed concrete industry sca le a nd the ra te of satisfaction of recycled aggregate volume, and a cost-benefit analysis method was used to examine the benefits of high-quality recycled aggregate production and sales. As a result, the production cost of ready-mixed concrete is reduced by 2.3~16.2% depending on the application rate, the economic effect of the use of recycled aggregate on the construction industry is about 106.8~142.6 billion KRW, and the effect of increasing the value of the recycled aggregate production industry generated about 1.22 times the benefit.