• The Korean Journal of Food And Nutrition
• /
• v.20 no.1
• /
• pp.34-39
• /
• 2007

Microbiological and sensory evaluations were performed on bio-soybean paste treated with citron and immobilized microorganisms from Bifidobacterium animalis DY 64. Aerobic microorganisms in bio-soybean paste stored at room temperature, initially, significantly increased(p<0.05) during 15 days of storage. However, a subsequent, slight decrease(p<0.05) was observed after 30 days. Food pathogens such as Salmonella spp., Staphylococcus aureus and Escherichia coli were not detected in the bio-soybean paste throughout the storage days. Bio-soybean paste treated with 3.0${\sim}$7.0% citron combined with 10% immobilized microorganisms increased consumer acceptance relating odor and flavor. In conclusion, soybean paste treated with citron and immobilized microorganisms from Bifidobacterium animalis could be used as a viable health food with respect to enhancing consumer acceptance.

• 한국지형공간정보학회:학술대회논문집
• /
• 2002.11a
• /
• pp.73-80
• /
• 2002

RFM is believed to be universally applicable to any type of the sensor. Most of researches carried out lately are concentrated on terrain-independent method, but the researches about approvement of accuracy by way of terrain-dependent method are required to increase a practical use of satellite imagery in nonprofessional groups. This research focused on a means to improve RFM solution, a matching technique, and a generation of DEM through a correlation analysis, with terrain-dependent solution. The result shows that accuracy problem which is caused by over-parameterization on RFCs was removed through correlation analysis, and it was possible to generate a accurate DEM with terrain-dependent solution. And also, the application of RFM with different satellite images show sensor independent characteristics of RFM

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.20 no.1
• /
• pp.257-261
• /
• 2006

The symptoms of malaria are periodic alternting of fever and chills on every one, two or three days. The patient has a fever at the first time of malaria, feels a chill, and has muscle pain at the next time. The long cycle of malarial fever such as every 2 or 3 days means that it takes a turn for the worse. In this study, oriental medicine was taken based on the oriental medicine principle such as Gagamcheongbi-tanggami(加減淸脾湯加味方), and the patient takes a turn for the better. The purpose of this paper is to report the patient with malarial fever, a chill and muscle pain who was improved dy oriental medical treatment.

• Journal of the Korean Ceramic Society
• /
• v.41 no.8
• /
• pp.618-622
• /
• 2004

Excitation spectra of the 1.6 rm emission originating from $Ho^{3＋}$：$^{5}$ I$_{5}$ \longrightarrow$^{5}$ I$_{7}$ transition in fluoride, sulfide, and selenide glasses were measured at wavelengths around 900nm where the fluorescing $^{5}$ I$_{5}$ level is located. In specific energy range where the frequency upconversion populating $^{5}$ F$_{1}$ state happens, the excitation efficiency of the 1.6 fm emission was deteriorated in fluoride and sulfide hosts. In selenide however spectral line shapes of the excitation spectrum and the '$^{5}$ I$_{8}$ \longrightarrow$^{5}$ I$_{5}$ absorption spectrum looked seemingly identical to each other. Differences in optical nonlinearity as well as electronic band gap energy of the host glasses used are responsible for the experimental observations. On the other hand, codoping of rare earths such as Tb$^{3+}$, Dy$^{3+}$, Eu$^{3+}$, and Nd$^{3+}$ was effective in decreasint the terminating $^{5}$ I$_{7}$ level lifetime. However, at the same time, some of the codopants increased unnecessary absorption at the 1.6 $\mu$m wavelengths via their ground state absorption. Though the lifetime quenching effect of Eu$^{3+}$ was moderate, it exhibited no additional extrinsic absorption at the 1.6 $\mu$m band.EX>m band.

• Textile Coloration and Finishing
• /
• v.33 no.3
• /
• pp.97-104
• /
• 2021

In this study, the dyeability of m-aramid fabric with various cationic dyes using two bath two step dyeing method were investigated. The exhaustion properties of Doracryl series recommend for aramid(Doracryl^® Red GL 100%(DR), Doracryl^® Blue GL 300%(DB), Doracryl^® Yellow XGRL 200%(DY)) and commercial cationic Synocryl series(Synocryl^® Red GRL ED(SR), Synocryl^® Blue GSL ED(SB), Synocryl^® Yellow 3RL ED(SY)) for acrylic were measured by using Dye-O-meter. In the presence of carrier, the exhaustions of Doracryl series were higher to those of Synocryl series and the opposite phenomenon was observed in the absence of carrier. And the severe migrations of cationic dyes to acetate, nylon and wool fabrics were observed without carrier.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.185-185
• /
• 2003

백색 LED를 실현하는 방법의 하나로 UV LED와 적, 녹, 청의 3색 형광체를 이용하는 방법이 주목받고 있다. 이것은 연색성과 색온도 제어 특성이 뛰어나다. 그러나 기존의 형광체는 단파장, 약 250nm 전후, 에서 여기되는 특성을 갖고 있기 때문에 near UV(nUV), 약 380-410nm, 의 LED에 응용하기에는 발광특성에 문제점을 갖고 있다. 본 연구에서는 nUV 여기가 가능한 strontium aluminate를 flux를 이용한 고상반응법으로 합성하고 발광 특성을 분석하였다. SrO와 A1$_2$ $O_3$의 조합비와 반응조건에 따라서 SrA1$_2$ $O_4$ 흑은 Sr$_4$Al$_{14}$ $O_{25}$ 가 합성되었고, 이들은 도핑과 함께 각각 약 520nm에서의 녹색발광과 약 480nm에서의 청녹색 발광 특성을 보이고 있었다. 도펀트로는 Eu, Dy, Ce, Pr 등이 단독 혹은 혼합되어 첨가되었고, 종류와 양에 따라서 발광 파장의 이동이 관찰 되었고, 강도도 이것에 크게 의존하고 있었다. 또한 발광강도는 여기 파장에도 의존하고 있었으며, 약 350-390nm의 nUV에서 가장 높은 발광강도가 관찰되었다.다.

• Wind and Structures
• /
• v.8 no.3
• /
• pp.147-161
• /
• 2005

Two identical tall building models with square cross-sections are experimentally studied in a wind tunnel with high-frequency-force-balance (HFFB) technique to investigate the interference effects on wind loads and dynamic responses of the interfered building. Another wind tunnel test, in which the interfered model is an aeroelastic one, is also carried out to further study the interference effects. The results from the two kinds of tests are compared with each other. Then the influences of turbulence in oncoming wind on dynamic interference factors are analyzed. At last the artificial neural networks method is used to deal with the experimental data and the along-wind and across-wind dynamic interference factor $IF_{dx}$ & $IF_{dy}$ contour maps are obtained, which could be used as references for wind load codes of buildings.

• Journal of Information Display
• /
• v.11 no.1
• /
• pp.33-38
• /
• 2010

The propagation of cracks was quantitatively analyzed in $Al_2O_3$ ceramic using the mechanoluminescence (ML) of $SrAl_2O_4$:Eu,Dy. The bridging zones behind the crack tip were clearly detected in the crack path of $Al_2O_3$ within a realistic time frame. The magnitudes and shapes of the bridging stress distributions changed with the advancing cracks. They continued to change with the change in the applied load even after the cessation of crack propagation. Effective toughening then commenced, and the applied stress intensity factors dramatically increased up to ~50 MPa $\sqrt{m}$. The expected $K_{Tip}$ values based on the instantaneous bridging stress distributions obtained from the ML observations deviated greatly from those obtained from the measurement using the conventional crack tip lengths; rather, they support the results obtained when bridging tips were used in the quasidynamic crack propagations.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• v.12B no.1
• /
• pp.13-18
• /
• 2002

Novel method to calculate flux linkage for 3-D finite element analysis is proposed. It does not require any integral path if the current direction in a coil is known. The flux linkage can be calculated very easily using simple volume based integration. The current direction is calculated based on the recently developed technique by the authors. The novel method for flux linkage calculation is verified by applying to a very complicated deflection yoke coil. The simulation result is compared to the experimental one. From the simulation, it is shown that the proposed method is very accurate and effective to calculate the flux linkage of a coil.

• Journal of Microbiology and Biotechnology
• /
• v.15 no.3
• /
• pp.477-483
• /
• 2005

Corynebacterium ammoniagenes ATCC 6872, which does not accumulate pyrimidine nucleoside or nucleotide, was metabolically engineered to secrete a large amount of thymidine. Characteristics of 5-fluorouracil resistance ($FU^r$), hydroxyurea resistance ($HU^r$), trimethoprim resistance ($TM^r$), thymidylate phosphorylase deficiency ($deoA^-$), inosine auxotrophy ($ino^-$), 5-fluorocytosine resistance ($FC^r$), thymidine kinase deficiency, and thymidine resistance ($thym^r$) were successively introduced into mutant strains KR3 and DY5T9-5, and shake-flask cultures were able to accumulate 408.1 mg/l and 428.2 mg/l of thymidine, respectively, as a major product. The mutant strains did not accumulate thymine at all and accumulated less than 10 mg/l of other pyrimidine nucleosides, such as cytosine, cytidine, and deoxycytidine, as byproducts.