• Nuclear Engineering and Technology
• /
• 제53권8호
• /
• pp.2582-2590
• /
• 2021

The high-energy milling is one of the most extended techniques to produce Oxide dispersion strengthened (ODS) powder steels for nuclear applications. The consequences of the high energy mill process on the final powders can be measured by means of deformation level, size, morphology and alloying degree. In this work, an ODS ferritic steel, Fe-14Cr-5Al-3W-0.4Ti-0.25Y₂O₃-0.6Zr, was fabricated using two different mechanical alloying (MA) conditions (M_std and M_act) and subsequently consolidated by Spark Plasma Sintering (SPS). Milling conditions were set to evidence the effectivity of milling by changing the revolutions per minute (rpm) and dwell milling time. Differences on the particle size distribution as well as on the stored plastic deformation were observed, determining the consolidation ability of the material and the achieved microstructure. Since recrystallization depends on the plastic deformation degree, the composition of each particle and the promoted oxide dispersion, a dual grain size distribution was attained after SPS consolidation. M_act showed the highest areas of ultrafine regions when the material is consolidated at 1100 ℃. Microhardness and small punch tests were used to evaluate the material under room temperature and up to 500 ℃. The produced materials have attained remarkable mechanical properties under high temperature conditions.

• 대한방사선기술학회지:방사선기술과학
• /
• 제45권6호
• /
• pp.553-560
• /
• 2022

The purpose of this study is to evaluate the clinical risk according to the applicator heterogeneity, mislocation, and tissue heterogeneity correction through a dose verification program during brachytherapy of cervical cancer. We performed image processing with MATLAB on images acquired with CT simulator. The source was modeled and stochiometric calibration and Monte-Carlo algorithm were applied based on dwell time and location to calculate the dose, and the secondary cancer risk was evaluated in the dose verification program. The result calculated by correcting for applicator and tissue heterogeneity showed a maximum dose of about 25% higher. In the bladder, the difference in excess absolute risk according to the heterogeneity correction was not significant. In the rectum, the difference in excess absolute risk was lower than that calculated by correcting applicator and tissue heterogeneity compared to the water-based calculation. In the femur, the water-based calculation result was the lowest, and the result calculated by correcting the applicator and tissue heterogeneity was 10% higher. A maximum of 14% dose difference occurred when the applicator mislocation was 20 mm in the Z-axis. In a future study, it is expected that a system that can independently verify the treatment plan can be developed by automating the interface between the treatment planning system and the dose verification program.

• 한국컴퓨터정보학회논문지
• /
• 제14권2호
• /
• pp.129-138
• /
• 2009

고령화 사회를 넘어 고령사회를 눈앞에 두고 있는 우리나라에서 노인 문제는 더욱 심각할 것으로 예상되고 있다. 본 연구에서는 집 또는 복지/요양 시설에서 생활하고 있는 거주자들의 일상생활 행동 모형을 정립하는 연구를 수행하였다. 이를 위해 본 연구에서는 사건 발생을 중심으로 하는 일상 행동 모형 $W_{ip}(n)$을 제안하였다. 본 연구에서는 제안된 행동 모형을 기반으로 조도/온도 센서로 구성된 무선 센서 네트워크 시스템을 구축하였다. 본 연구에서 구축한 시스템에서 거주자들의 일상 행동 양상에 대하여 실험을 수행하였다. 실험을 통해서 거주자의 일상생활이 정규적인 범위에 있는지 벗어나 있는지 구분하고자 시도하였다. 제안된 일상 행동 모형이 미래에 집이나 사회복지 시설의 거주자들을 효과적으로 보살피는데 매우 잘 적용될 것임을 실험 결과들이 알려주고 있다.

• Radiation Oncology Journal
• /
• 제21권3호
• /
• pp.238-244
• /
• 2003

목적: 개별화되어 가는 고선량률 근접치료계획의 추세에 따라, 고성량률 근접치료계획의 절대적 선량과 상대적인 선량분포를 독립적으로 계산하여 환자의 해부영상 위에 겹쳐 표시할 수 있는 품질보증용 컴퓨터 프로그램을 개발한다. 대상 및 방법: 컴퓨터 프로그램은 먼저, 환자의 치료계획에서 계산된 선원의 위치, 각 위치에서의 조사시간, reference point에서의 선량, 치료계획이 실시된 날짜 등의 자료 입력을 필요로 한다. ICWG 권고 수식과 선원의 비등방성 표를 이용하여 $10\times12\times10\;(Cm^3)$의 공간에서 선량분포가 계산된 후 reference point에서의 선량이 자동적으로 치료계획의 결과와 비교된다. 모의치료의 영상이나 자기공명(Magnetic Resonance) 영상을 입력하고 사용자가 선택한 점을 수직으로 교차하는 3개의 평면에서 등선량곡선을 겹쳐서 보여준다. Gamma Med사의 Gam-madot (MDS Nordion, Germany)에서 표준 치료계획을 실행하여 정확성을 확인하였으며, Plato (Nucletron Cor-poration, The Netherlands)에서 실행된 9명의 환자치료계획과 비교하였다. 결과: 3개의 표준 치료계획에서 절대선량은 $2.8\%$ 내에서 일치하였으며 등 선량분포도 좋은 일치를 보였다. 9명의 환자에 대하여 시행된 치료계획과의 비교에서는 평균 $3.4\%$의 오차를 보였다. 결론: 개발된 컴퓨터 프로그램은 정확하고 신속하게 고선량률 치료환자의 치료계획의 정확성을 확인할 수 있게 해주며, 등선량 곡선을 환자의 해부적 영상에 결합할 수 있는 기능은 치료계획의 질을 높이는데 기여할 수 있을 것으로 기대된다.$39\%$), 복회음부 절제수술시 32건($97\%$), 측연의 경우 32건($97\%$), 후연의 경우 32건($97\%$), 그리고 전연의 경우 16건($45\%$)에서 부합되는 것으로 나타났다. 결론: 직장암의 수술 후 방사선치료 시 적절한 방사선치료 조사영역의 결정을 위하여 표준적인 조사영역을 제시 하였으나 개별 환자의 병변 위치와 진행상태, 수술 소견 등에 따라 적절한 변형은 필수적이라 하겠다. 이 권고안의 임상적 타당성은 향후 시행될 Patterns of Care 연구를 통하여 증명하는 것이 필요하겠다.정가능하고, 폐에 조사되는 방사선 양도 줄일 수 있었다.저부까지 거리 차이는 종양 크기가 4 cm 미만인 경우는 5.3 mm였으나 4 cm 이상일 때는 19.4 mm로 현저한 변화를 보였다. 자궁경관 굴곡각은 60세 미만인 경우 60세 이상보다 8$^{\circ}$ 정도 더 변화가 있었고, 종양 크기가 4 cm 이상일 때 미만일 때보다 2배 이상 굴곡 변화가 있었다. 결론: 자궁경부암 환자에서 근치적 방사선치료 시 치료에 따른 자궁 크기 및 위치 변화가 다양하고 개별적으로 예측하기 쉽지 않으므로, 특히, 60세 미만이거나 종양 크기가 4 cm 이상인 경우, 삼차원입체조형치료나 강도변조 방사선치료를 이용한 근치적 방사선치료 시 치료 중 개별환자의 계획용표적체적의 변화를 반드시 고려해야 한다고 생각한다.량체적히스토그램, Lymankutcher 모델에 의한 정상조직합병증발생률 및 기타 선량통계값 등 모든 면에 있어서 우월성을 확인할 수 있었다. 향후 이러한 결과가 임상에서 실질적인 합병증 발생률 감소와 잘 연계되는지 계속적인 추적관찰 및

• 대한간호학회지
• /
• 제25권2호
• /
• pp.259-278
• /
• 1995

This study was done to investigate levels of physical fitness, self efficacy(SE), instrumental activities of daily living(IADL), and quality of life (QL), and their relationships among the elderly Data were collected from 47 noninstitutionalized elderly dwell-ing in their own homes and 43 institutionalized elderly living in homes for older people. The ages of the subjects were 65 years and over. The data were col lected from January 20th to February 20th, 1995. Physical fitness was measured with T.K. K dyna mometer, grip dynamometer, stop watch, and Purdue pegboard. Structured questionnaires developed by Kim by Lawton & Brody, and by Ro were adopted to measure SE, IADL, and QL, respectively. The data were analyzed using t-test, ANOVA, and Pearson correlation coefficients. The results were as follows : 1. The noninstitutionalized elderly had higher scores in such measures of physical fitness as body weight, skinfold thickness, flexibility and coordination as compared to the institutionalized elderly. 2. On the following measures of physical fitness, men showed higher levels than women ; in height when standing, height when sitting, body weight, and muscle strength. Women had more trunk flexibility than men. 3. Muscle strength was positively correlated with height when standing, height when sitting, and body weight. The following measures of physical fitness, muscle strength, flexibility and coordi nation, were negatively correlated with "up and go”. 4. The noninstitutionalized elderly had higher scores in SE(t=2.28, p<0.05), IADL(t=2.24, p<0.05), and QL(t=2.41, p<0.05) as compared to the institutionalized elderly. 5. SE was positively correlated with both IADL(r=0.41, p<0.001) and QL(r=0.54, p<0.001), and the latter two variables were a positively correlated (r=0.30, p<0.001). 6. SE was positively correlated with the physical fitness measures of height when standing, body weight, strength of leg muscles, strength of back muscles, grip strength, and level of touching the floor, but negatively correlated with "up and go”. 7. Positive correlations were revealed between IADL and the physical fitness measures of height, strength of leg muscles, level of trunk muscle extension, level of touching the floor, and coordination. The IADL was negatively correlated with “up and go”. 8. QL was positively correlated with body weight (r=0.28, p<0.01) and skinfold thickness (r=0.26, p<0.05). 9. Age was negatively correlated with the physical fitness measures of height when standing, height when sitting, “up and go”, strength of leg muscles, strength of back muscles, grip strength, level of trunk muscle extension, and coordination. 10. Age was also negatively correlated with SE (r=-0.24, p<0.05) and IADL(r=-0.22, p<0.05). The above results suggest that caring elderly in their own homes were more effective and that nursing interventions to enhance physical fitness, SE, IADL, and QL especially for the institutionalized elderly are stressed.

• 한국ITS학회 논문지
• /
• 제10권1호
• /
• pp.27-41
• /
• 2011

본 논문은 도시부 간선도로의 트램을 위한 고정식 우선신호 전략으로 트램의 연동모형 MAXBAND MILP-Tram을 제시하였다. MAXBAND MILP-Tram은 전통적인 간선도로 연동모형인 MAXBAND를 기반으로 하고 있으며, 중앙트램 전용 차로의 트램과 일반차로의 승용차 모두를 위한 이중화된 연동폭을 산정할 수 있다. 본 모형은 일반차량 대비 낮은 속도와 정류장 정차시간이 포함되는 통행시간을 가지는 트램 통행특성을 고려하여 연동폭을 산정할 수 있다. 중앙트램전용차로에서는 현시순서에 따라 트램의 녹색시간이 크기를 달리하게 되며, 이를 제약조건으로 표현하였다. 미시적 시뮬레이션 효과분석을 수행하여 트램 연동모형의 효과분석을 위한 트램과 교차로의 제어지체와 사람당 제어지체 변화를 확인하였다. MAXBAND MILP-Tram으로 산출된 신호시간을 VISSIM에 적용한 결과 MAXBAND MILP-2 대비 트램의 차량당 평균 제어지체는 57%가 감소된 결과를 나타내었으나, 교차로 평균 제어지체의 경우 일반차량의 연동폭이 감소함에 따라 MILP-Tram은 MILP-2 대비 18% 증가된 결과를 나타내었다. 또한 일반차량의 교통량 변화를 이용한 민감도 분석에서는과포화 상태에 근접함에 따라 MAXBAND MILP-Tram과 같이 �낵째� 현시순서만을 변경시키는 우선신호 기법은 사람당 지체를 감소시킬 수 있는 유용한 수단임을 확인하였다.

• 한국치위생학회지
• /
• 제8권2호
• /
• pp.53-66
• /
• 2008

There was to purpose of this study improves analyzing cause that prosthesis brings bite engaging that is inaccurate in patient's mouth, when supposed that all conducts that do in operatory and dental laboratory are perfect. Impression did check bite by alginate impression material and polymerization style silicon impression material that use usually in presence at a sickbed Irreversibility, hydrocolloid, alginate impression material washed in flowing water and poured anhydrite after wait about 8 minutes so that region that charge interest after impression check bite may become undoing. And hydrophile property addition polymerization style impression material poured anhydrite after blow 30 considering impression material dwell time and H2 gas occurrence time (5~15 minute) after have washed in flowing water. I got each 7 models, result that manufactures total 28 and measures by third dimension measuring instrument (Meteo, Korea) following sequence curing in tray holder and floor 1, By Alginate impression when is hardened in tray holder and when is hardened in the floor after do check bite, SPH 4, SPH5 all as there is synonymy appeared(P<0.05). By in case do not use average 0.1741 in case use tray holder in 0.0447 SPH5s in case do not use average 0.2838 pastas in case use tray holder in SPH4 0.0309, When did not use both SPH4 and SPH5 tray holder, when used tray holder, 1 appeared more greatly. 2. By amity sex addition polymerization style silicon impression when is hardened in tray holder after do check bite and when is hardened in the floor SPH 4, a11 of the SPH5s very big synonymy be(P>0.05). And in case use tray holder in 0.000657 pasta SPH5s in case do not use average 0.000129 pastas in case use tray holder in SPH4 average 0.000114 pastas, by in case do not use 0.000757, I appeared more greatly when used tray when did not use both SPH4 and SPH5 tray holder, but 1 appeared is not level to keep in mind(Table 8~9). 3 SPH4 was looked very big mindfulness in model that manufacture doing impression check bite by Alginate and model that do impression check bite by amity sex accessory penalty silicon without using tray holder(P< 0.001). I use tray holder and SPH4 did not appear synonymy in model that manufacture doing impression check bite by Alginate and model that do impression check bite by amity sex accessory penalty silicon(P>0.05). Study finding of above when see synthesis Alginate certainly tray holder use must and I could know that hardening method does not exert big influence on volume stability if remove impression sieve of excess because amity sex accessory penalty silicon passes over tray, Also, Alginate impression material previewed can get heading a conspiracy style that volume stability of accessory penalty silicon impression material degree is if use tray holder.

• 대한치과보철학회지
• /
• 제38권5호
• /
• pp.595-605
• /
• 2000

Dental ceramics have good aesthetics, biocompatibility, low thermal conductivity, abrasion resistance, and color stability. However poor resistance to fracture and shrinkage during firing process have been limiting factors in their use, particularly in multiunit ceramic restorations. A new method for making all-ceramic crowns that have high strength and low processing shrinkage has been developed and is referred to as the Vita In-Ceram method. This study was performed to investigate the effect of $CeO_2$ addition in borosilicate glasses on the strength of alumina-glass composites. Porous alumina compacts were prepared by slip casting and sintered at $1,100^{\circ}C$ for 2 hours. Dense composites were made by infiltration of molten glass into partially sintered alumina at $1,140^{\circ}C$ for 4 hours. Specimens were polished sequentially from #800 to #2000 diamond disk. and the final surface finishing on the tensile side was received an additional polishing sequence through $1{\mu}m$ diamond paste. Biaxial flexure test was conducted by using ball-on-three-ball method at a crosshead speed of 0.5mm/min. To examine the microstructural aspect of crack propagation in the alumina-glass composites, Vickers-produced indentation crack was made on the tensile surface at a load of 98.0 N and dwell time of 15 sec, and the radial crack patterns were examined by an optical microscope and a scanning electron microscope. The results obtained were summarized as follows; 1. The porosity rates of partially sintered alumina decreased with the rising of firing temperature. 2. The maximum biaxial flexure strength of 423.5MPa in alumina-glass composites was obtained with an addition of 3 mol% $CeO_2$ in glass composition and strength values showed the aspect of decrease with the increase of $CeO_2$ content. 3 The biaxial flexure strength values of alumina-glass composites were decreased with rising the firing temperature. 4. Observation of the fracture surfaces of alumina-glass composites indicated that the enhancement of strength in alumina-glass composites was due to the frictional or geometrical inter-locking of rough fracture surfaces and ligamentary bridging by intact islands of materials left behind the fracture front.

• 한국전문물리치료학회지
• /
• 제15권4호
• /
• pp.50-58
• /
• 2008

The purpose of this study was to investigate the effects of the task-oriented training according to the application time with the change of motor and cognition function. Focal ischemic brain injury was produced in Sprague-Dawley rats (20 rats, $250{\pm}50$ g) through middle cerebral artery occlusion (MCAo). Before MCAo induction, all rats were trained in treadmill training and Morris water maze training for 1 week. Then they were randomly divided into groups: Group I : MCAo induction ($n_1$=5), Grop II: the application for simple treadmill task training after. MCAo induction ($n_2$=5). Group III: the application for Morris water maze cognitive task training after MCAo induction ($n_3$=5). Group IV: the application for progressive treadmill task training and Morris water maze cognitive task training after MCAo induction ($n_4$=5). Modified limb placing tests (MLPTs) and motor tests (MTs) were performed to test motor function and then Morris water maze acquisition test (MWMAT) and Morris water maze retention test (MWMRT) were performed to test cognitive function. For MTs, there were significant interactions among the groups with the time (p<.001). Group IV showed the steeper increasing pattern than those in other Groups on the 7th and 14th day. For MLPTs, there were significant interactions among the groups with the time (p<.001). The scores in Group III. IV had showed the more decreasing pattern than those in Group I, II since the 7th day and 14th day. For MWMAT, there were significant interactions among the groups with the time (p<.001). Group II found the Quadrant circular platform showed the steeper decreasing pattern than that in Group I on the 9th, 10th, 11th and 12th day. Group III. IV found the quadrant circular platform showed the slower decreasing pattern than that in Group I, II, For MWMRT, there were significant differences among the four groups (p<.001). The time to dwell on quadrant circular platform in Group IV on the 13th day was the longest compared with other groups. These results suggested that the combined task training was very effective to improve the motor and cognition function for the rats affected on their focal ischemic brain injury.

• 한국환경복원기술학회지
• /
• 제2권1호
• /
• pp.48-57
• /
• 1999

This study was aimed to establish biotop unit of the mixed rural city for the method and process of the biotop mapping system. Survey site was Maejuri of Seunghwan(158ha), Gisanri of Mokchon(132ha) and Namkwanri, Pungsemeon(214ha). So the main process was divided by 4 schemes such as Biosphere, Geosphere, Antrosphere and Evaluation. Also the GIS(geographic information system) was used to make the database of the biotop and biotop complex, analyze the cross-combinations and analyze the characters of the biotop. Biotop mapping system had 5 steps which were proceeded with research goals, constructing the spatial database and attribute database, classifying the 3 types of biotop such as tree/shrub biotop, grass biotop and wetland biotop, cross-analyzing 3 biotop types with land use, habitat characters, relief characters and danger/disturbance elements and evaluating the 3 types of biotop. The results of applicating the biotop mapping system on the research site as followings : The distributions of the land uses in Maejuri, Seunghwan eup in Chonan city were recorded by forest(29.8%), orchard(14.1%) and landscaping around building site(9.0%). Gisanri, Mokchonmeon were composed of forest(64.5%), farm(12.8%) and Namkwanri, Pungsemeon were concentrated rice field(39.6%), dwell district(22.4%). The Tree/Shrub biotop type was reclassed by the forest type, natural and artificial decidous type with natural coniferous. The Grass biotop type was reclassed by the wild grassland type, garden type and peddy field with wild grassland. The distributions of the wet land were pointed high at the wet land type with reed marsh and edge vegetation around wet land in reservoir and river. The evaluation of the mapped bitopes was completed to the following aspect, "amenity" and "environmental education". A high value of 7.13%(1 class) was shown Maejuri, Seunghwan eup. The regions which were studied synthetically are divided to three parts ; the area where have nature and art mixed(Seunghwan), the area which is more artificial because people inhabit there for a long time(Pungsemeon) and the area that ecological environment is threatened by development pressure(Mokchonmeon). Therefore, ecological restoration plan which depends on specific property of the regions should be established. Also the interdisplinary researches were needed to develop the BMS(Biotop Mapping System) in Korea because of the differences with Germany, England's ecological habitat conditions.