• Journal of the Korean Society of Hazard Mitigation
• /
• v.4 no.3 s.14
• /
• pp.89-94
• /
• 2004

Recently, the cityward tendency of the population has caused the construction of a high rise apartment increased, because it is possible for many people to dwell on a small ground area in an apartment. In the future the number of the constructed high-rise apartment units will also increase, because many people require a better environment and more improved space of their life. However, apartment buildings with many dwellers in spite of small area are exposed to great dangers, particularly fire. So the adaptable control methods of smoke which is the most dangerous to people in a fire were proposed by an analysis on some standards for the fire in this study.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.24 no.6
• /
• pp.594-598
• /
• 2015

The effects of Ni on the mechanical properties of WC-Xwt.%Ni-1.5wt.%Si-1.1wt.%$B_4C$ composite (X = 21.6, 23.6, 25.6 and 27.6 wt.%) were investigated in order to replace Co with Ni as the binder metal for hard materials based on WC-Co system. Using X-ray diffraction, optical microscopy, field-emission scanning electron microscopy results, the microstructure, pore distribution and grain size of the composites sintered at $1,150^{\circ}C$ were examined with different fraction (X = 21.6, 23.6, 25.6 and 27.6 wt.%) of binder metal Ni. The average WC grain size of the $WC-Ni-Si-B_4C$ composites was about $1{\mu}m$. The Rockwell hardness : A (HRA) and transverse rupture strength were about 88HRA and $110kgf/mm^2$, respectively. The obtained sample was bonded with SM45C at a temperature of $1,050^{\circ}C$. The thickness and mechanical properties of the bonded area were investigated with different dwell time at a bonding temperature of $1,050^{\circ}C$.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.2
• /
• pp.113-118
• /
• 2005

This paper shows a satellite battery cell voltage monitor system to make differential voltage measurements when one or both measurement points are beyond voltage range allowed by a conventional differential amplifier. This system is particularly useful for monitoring the individual cell voltage of series-connected cells that constitute a rechargeable satellite battery in which some cell voltages must be measured in the presence of high common mode voltage.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.10
• /
• pp.5134-5139
• /
• 2013

Ladder Diagram(LD) or Sequential Function Chart(SFC) is used for the design of complex modern control system with Programmable logic controller(PLC). LD is the most widely utilized among PLC standard language. But recently, SFC is used frequently. SFC is very easy to grasp the sequential flow of control logic but is difficult for describing combinational logic. When the interrupt factor is occurred, the main program is stopped. And after the interrupt program is completed, the main program is restart. Therefore the more complex the interrupt program, the main program is interrupted downtime will be that much longer. In this paper, we propose the method for interrupt implementation without the dwell time of the main program by SFC language and confirm his feasibility through the simulation.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2005.06a
• /
• pp.171-176
• /
• 2005

This paper presents a novel Intelligent-Welding-Carriage (IWC) for automation of curved block in shipbuilding. The curved block is usually used in both front and back side of the ship. In curved block root gap is big, 1-7 (mm) and inclination, 0-30 (deg). Since available conventional carriage type is limited to use below root gap of 3 (mm), only manual welding is employed in curved block. To adopt an IWC in curved block, it requires control of the welding conditions, i.e., voltage. current, weaving speed, dwell time and travel speed, with respect to root gap and inclination to achieve good welding qualify. In this paper, an IWC is developed for automization of welding operation to accommodate gap and inclination. Kinematics model and dynamics using Lagrangian formulation of the manipulator is introduced. IWC utilizes a database to perform accurate welding. The database is programmed based on numerous experimental test results with respect to gap, inclination, material, travel speed, weaving condition, voltage, and current. Finally, experimental result using PID control is addressed for verifying the trajectory tracking accuracy of end-effector.

• Korean Journal of Materials Research
• /
• v.3 no.5
• /
• pp.514-520
• /
• 1993

In this paper the cure cycle of carbon fiber/phenolic resin was investigated by the Taguchi Method in an experimental design. Experiments were systematically performed using $L_{18}(2^1 \times 3_7)$ orthorgonal array table of the experimental design. In the experimental design, eight compression molding parameters (heating rate, pressing temperature, pressing rate, molding pressure, curing temperature, dwell time at curing temperature, cooling rate and degassing) were considered and the effects of the parameters on the flexural strength and the apparent porosity of carbon fiber/phenolic composites were investigated. The analysis of variance for the experimental results indicated that molding pressure and curing temperature are the most significant parmeters in the flexural strength and the apparent porosity of carbon fiber/phenolic resin composites, respectively.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.39 no.1
• /
• pp.42-48
• /
• 2002

In this paper, a decision method using multiple threshold values for PN code acquisition in Direct Sequence Code Division Multiple Access (DS-CDMA) systems is described. We apply this technique to the conventional double dwell serial search algorithm and analyze it in terms of mean code acquisition time. For the analysis, we present mathematical model of proposed algorithm and also perform the simulation under IMT-2000 channel models. Numerical results show that our proposed scheme outperforms the conventional one by 0.2 - 0.5 sec with respect to the mean code acquisition time because multiple threshold values mitigate the possible decline in search performance caused by the use of a single threshold.

• Journal of the Korean Ceramic Society
• /
• v.54 no.6
• /
• pp.492-498
• /
• 2017

A thermal barrier coating (TBC) with self-healing property for cracks was proposed to improve reliability during gas turbine operation, including structural design. Effect of healing agent on crack propagation behavior in TBCs with and without buffer layer was investigated through furnace cyclic test (FCT). Molybdenum disilicide ($MoSi_2$) was used as the healing agent; it was encapsulated using a mixture of tetraethyl orthosilicate and sodium methoxide. Buffer layers with composition ratios of 90 : 10 and 80 : 20 wt%, using yttria stabilized zirconia and $MoSi_2$, respectively, were prepared by air plasma spray process. After generating artificial cracks in TBC samples by using Vickers indentation, FCTs were conducted at $1100^{\circ}C$ for a dwell time of 40 min., followed by natural air cooling for 20 min. at room temperature. The cracks were healed in the buffer layer with the healing agent of $MoSi_2$, and it was found that the thermal reliability of TBC can be enhanced by introducing the buffer layer with healing agent in the top coat.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.8B
• /
• pp.1333-1340
• /
• 2000

This paper shows that the Kronecker sequence, the rapid acquisition spreading code, can be used in packet wireless data communication systems. The general properties of the Kronecker sequence such as construction and correlation characteristics are described, and it is shown that the Kronecker sequence can use a partial-period correlation for a faster acquisition. Based on above Properties, it can be expected that the Kronecker sequence can be used in packet communication systems because the probability of false alarm for the Kronecker sequence is lower and flatter(that is, less sensitive to Ec/No variations) than that for the PN sequence under the assumption that both sequences have the same acquisition time.

• Journal of the military operations research society of Korea
• /
• v.35 no.2
• /
• pp.63-76
• /
• 2009

The rapid development of IT and Science & Technology has greatly influenced the aspect of future warfare. Accordingly, the Army Forces require efficient logistics support, hence the importance of AS/RS has steadily increased. This research validated mathematical propriety of the management problem of S/R machine in AS/RS with mathematical analysis based on its travel time and simulation analysis using Automod. After all, we could improve the performance of S/R machine based on its dwell point and turn-over distribution.