• 제목/요약/키워드: Dust separation

검색결과 78건 처리시간 0.02초

주름필터를 적용한 CYBAGFILTER®의 여과성능 특성 (Dust Filtration Characteristics of Pleated Filter Bags Installed in CYBAGFILTER®)

  • 박영옥;노학재;이영우
    • 한국대기환경학회지
    • /
    • 제24권4호
    • /
    • pp.483-491
    • /
    • 2008
  • The filtration characteristics of $CYBAGFILTER^{(R)}$ unit with pleated filter bags were evaluated by comparing the performance of the unit with the lower part of cyclone shape with that of the unit with conventional lower part. Results from the test were also compared with those from the previous research with the $CYBAGFILTER^{(R)}$ in which round filter bags were installed. $CYBAGFILTER^{(R)}$ is the unit which combines the centrifugal separation mechanism and the fabric filtration mechanism in a single unit for efficient removal of particulate matters. The pleated filter bags are made of pleated fabric with an extension of the filtration area about 3 times compared with the conventional round filter bags. The results from the test using pleated filter bags showed an overall collection efficiency of over 99.9% regardless of the shape of lower part installed. When the lower part of cyclone shape was installed, the filter cleaning interval was over 2 times longer compared with that when the conventional lower part was installed. At the same conditions of filtration velocity and filter pressure drop, the $CYBAGFILTER^{(R)}$ with the lower part of cyclone shape, in which the pleated filter bags are installed, can be operated with a flow rate of round 3 times higher than that with conventional round filter bags.

인간의 단핵구와 비만세포에서 다양한 아토피 유발물질이 사이토카인 유전자의 발현에 미치는 영향 (Effects of atopic dermatitis induced materials on the expression of cytokine genes in human monocytes and mast cells)

  • 박경숙;김경준
    • 한방안이비인후피부과학회지
    • /
    • 제23권2호
    • /
    • pp.41-56
    • /
    • 2010
  • Objectives : On an experimental basis, the effects of atopic dermatitis induced materials on the expression of cytokine genes in human monocytes (THP-1, U937) and mast cells were studied. This study was carried out to be considered a fundamental knowledge in the research on the good of oriental medicine. Methods : After culturing THP-1, U937, and HMC-1, with the three different concentrations of LPS ($1\;{\mu}g/ml$), DPE ($10\;{\mu}g/ml$), and DNCB ($1\;{\mu}g/ml$), atopic dermatitis induced materials were treated in the culture medium. To investigate cytokine genes expression patterns, with lysis buffer and separation reagent, total RNA was extracted from THP-1, U937, and HMC-1 at intervals of 0, 12, 24, and 48 hours. Both cytokine mRNA expression patterns by atopic dermatitis induced materials and change of cytokine genes expression patterns in relation to atopy by selenium were analyzed with RT-PCR. Also IL-4 and INF-$\gamma$, which were secreted in the HMC-1, were analyzed using ELISA method. Results : 1. After treating THP-1 and U937 with LPS, DPE, and DNCB, there was no significant change in cytokine genes themselves, but various cytokines (IL-4, IL-6, IL-8, IL-13, IFN-$\gamma$, IFN-a, MCP-1, B2-MG) were expressed. 2. In the case of HMC-1, the expressions of IL-6 and IL-8 were significantly increased in the analysis of mRNA expression by dust mite allergens in DPE. 3. As a result of ELISA method, it is certain that IL-4 and IFN-$\gamma$ protein were secreted in the HMC-1 by DPE. 4. Selenium, an essential trace element, decreased the IL-10 and IL-13 expression in the HMC-1 by DPE. Conclusion : The results suggest that it is necessary to choose proper atopic dermatitis induced materials and suitable cultured cells in establishment of in vitro model of atopic dermatitis.

태양광 발전 PCS 구성부품에 대한 열적특성 및 고장모드영향분석 (Thermal Characteristic and Failure Modes and Effects Analysis for Components of Photovoltaic PCS)

  • 김두현;김성철;김윤복
    • 한국안전학회지
    • /
    • 제33권4호
    • /
    • pp.1-7
    • /
    • 2018
  • This paper is analyzed for the thermal characteristics(1 year) of the 6 components(DC breaker, DC filter(including capacitor and discharge resistance), IGBT(Insulated gate bipolar mode transistor), AC filter, AC breaker, etc.) of a photovoltaic power generation-based PCS(Power conditioning system) below 20 kW. Among the modules, the discharge resistance included in the DC filter indicated the highest heat at $125^{\circ}C$, and such heat resulting from the discharge resistance had an influence on the IGBT installed on the rear side the board. Therefore, risk priority through risk priority number(RPN) of FMEA(Failure modes and effects analysis) sheet is conducted for classification into top 10 %. According to thermal characteristics and FMEA, it is necessary to pay attention to not only the in-house defects found in the IGBT, but also the conductive heat caused by the discharge resistance. Since it is possible that animal, dust and others can be accumulated within the PCS, it is possible that the heat resulting from the discharge resistance may cause fire. Accordingly, there are two options that can be used: installing a heat sink while designing the discharge resistance, and designing the discharge resistance in a structure capable of avoiding heat conduction through setting a separation distance between discharge resistance and IGBT. This data can be used as the data for conducting a comparative analysis of abnormal signals in the process of developing a safety device for solar electricity-based photovoltaic power generation systems, as the data for examining the fire accidents caused by each module, and as the field data for setting component management priorities.

센서 및 MCU기반 지능형 환기창 빅데이터전송용 시스템 안정화에 관한 연구 (A Study on the Stabilization of a System for Big Data Transmission of Intelligent Ventilation Window based on Sensor and MCU)

  • 유희수
    • 한국전자통신학회논문지
    • /
    • 제16권3호
    • /
    • pp.551-558
    • /
    • 2021
  • IoT와 센서를 기반으로 원격으로 제어할 수 있는 액추에이터 모듈의 지능형 환기 기능을 구현하기 위해, 실내 가스/CO2/습도 온도 및 실내/외 미세먼지 관련 실외 환경을 감지하는 사전 설정된 개수의 데이터를 기반으로 환기 포트를 개폐하기 위한 알고리즘 설계 및 구동 회로를 구성하여 환기창시스템을 구현하였다. 실내공기 순환모듈의 전송데이터관련 센서와 조건이 많아 데이터 저장·관리·분석에 어려움을 겪고 있다. 빅데이터 기술은 실내 공기 순환 시스템에 채택되어야 한다. 원격 모니터링과 원격 무선 제어 화면은 환기구시스템의 상태를 추출하여 관리함으로써 분리 및 작동 조건을 자동화할 수 있도록 구축되었다. 엑츄에이터 및 센서로 구성된 환기창시스템의 제어 및 센싱용 대량의 데이터전송 안정성을 확보하기 위해 MQTT를 적용하고 시스템 오류를 대비하여 운용의 빅데이터 안정적인 전송 보장을 위해 RocketMQ를 활용하여 시스템을 구성하였다.

Harvesting Performance of the Prototype Small Combine for Buckwheat and Adlay

  • Yoo, Soonam;Lee, Changhoon;Lee, Beom Seob;Yun, Young Tae
    • Journal of Biosystems Engineering
    • /
    • 제43권4호
    • /
    • pp.320-330
    • /
    • 2018
  • Purpose: The aim of this study was to investigate the harvesting performance of a prototype small combine for buckwheat and adlay. Methods: The prototype small combine was designed and constructed. Its ratio of grain loss, ratio of output components in the grain outlet, and field capacity for harvesting buckwheat and adlay were analyzed through field tests. Results: The prototype small combine required a working width of about 0.6 to 0.7 m to harvest buckwheat. The maximum travel speed was about 0.36 m/. The total ratio of grain loss was about 21.6%, which consisted of 8.8% at the header and 12.8% at the dust outlet. The grain and the material other than grain (MOG) ratios at the grain outlet were 94.1% and 5.9% respectively. In the case of adlay harvest, the maximum working width was about 1.2 m, that is, two rows. The range of maximum travel speed was about 0.45 to 0.46 m/s. When adlay was harvested in one row, the total ratio of grain loss ranged from 36.3 to 42.8% according to the cutting height. The cutting height of 30 cm resulted in a higher total ratio of grain loss than 60 cm and 90 cm. When the cutting height was 60 cm, there was no significant change in the total ratio of grain loss according to the number of working rows and the stage of the primary transmission shift. The total ratio of grain loss ranged from 35.2 to 37.7%. The grain and the MOG ratios at the grain outlet ranged from 93.1 to 95.8% and from 4.2 to 6.9%, respectively. No significant difference was observed in relation to cutting height, number of working rows, and the stage of the primary transmission shift. Conclusions: The prototype small combine for harvesting miscellaneous cereal crops showed good potential for the efficient harvesting of buckwheat and adlay. However, to improve the harvesting performance, there seems to be a need to develop new crop varieties suitable for machine-based harvesting and improve the transmissions, reels, separation/cleaning systems.

나선형 부유 고분자 여재의 Coalescence 특성을 이용한 비점오염원 저감시설의 유수분리특성 연구 (A Study on the Characteristics of Oil-water Separation in Non-point Source Control Facility by Coalescence Mechanism of Spiral Buoyant Media)

  • 강성원;김석구;김영임;윤상린;김수해;김미경
    • 대한환경공학회지
    • /
    • 제29권8호
    • /
    • pp.950-955
    • /
    • 2007
  • 본 연구에서 개발한 시스템은 기존에 사용되던 유수분리기를 유류가 혼입되어 발생하는 도로, 교량 등의 도시 불투수면 비점 오염저감장치로 업그레이드한 것으로서 유적입자가 coalescence 원리에 의하여 고밀도 고분자 폴리에틸렌 소재를 사용하여 제작된 메디아의 표면과 공간 사이를 타고 이동하면서 합체되어 유적의 크기가 증가한 후 부상하여 제거되는 기전과 SS 성분의 고형물이 침전에 의해 제거되는 원리를 이용한 도시 비점오염저감시설이다. 따라서 본 연구에서는 coalescence 기전을 통해 유수분리가 일어나는 나선형 고분자 여재의 유수분리 특성을 image analysis를 통해 규명하였으며 또한 도로노면 먼지와 폐엔진오일을 이용하여 비점오염원 저감시설에 유입되는 폐수를 모사하여 비점오염원 저감시설의 유수분리 성능을 실험하였다. 연구에 사용된 여재는 부정형의 투명한 나선형 구조를 갖고 있으며, SEM 사진 및 BET 측정 결과 매끄러운 표면 특성을 나타내고 있다. 직접 측정 방법으로 여재의 표면적을 측정한 결과, 여재 1립당 표면적은 1,428 $mm^2$으로 나타났으며, 단위당 중량은 45.3 $kg/m^3$으로 조사되었다. 또한 폐수 내 기름 입자의 액적크기를 현미경으로 촬영하여 이미지 분석을 수행한 결과, 메디아를 통한 폐수내 기름성분의 제거가 coalescence에 의해 일어나고 있음을 증명하였다. 마지막으로 나선형 부유 메디아를 적용한 비점오염저감시설의 성능평가 결과, 유량에 따라서 부유성 고형물은 $86.6\sim95.2%$, $COD_{Cr}$, $87.3\sim95.4%$, n-Hexane 추출물 $71.8\sim94.8%$의 제거효율을 나타내어 본 장치의 처리성능은 기존의 비점오염원 저감시설의 처리대상물질인 유기물과 부유물질 뿐만 아니라 유류의 제거에도 효과적인 것으로 평가되었다.

DRUM impactor를 이용한 대기 입자상 물질 중 원소성분의 입경분포 특성 : 제주도 고산지역의 2002년 봄철 (3.29-5.30) 측정 연구 (Size Distributions of Trace Elements in Airborn Particulates Collected using Drum impactor at Gosan, Jeju Island : Measurements in Springtime 2002)

  • 한진석;문광주;류성윤;안준영;공부주;홍유덕;김영준
    • 한국대기환경학회지
    • /
    • 제20권4호
    • /
    • pp.555-569
    • /
    • 2004
  • Size -segregated measurements of aerosol composition using 8-stage DRUM impactor are used to determine the transport of natural and anthropogenic aerosols at Gosan site from 29 March to 30 May in 2002. Separation of ambient aerosols by DRUM impactor offers many Advantages over other standard filtration techniques. Some of the most important advantages are the ability to segregate into details by particle tire, to better preserve chemical integrity since the air stream doesn't pars through the deposit, to collect samples as a function of time, and to have a wide variety of impaction surfaces available to match analytical needs. Although the transport of Yellow sand is a well-known phenomenon in springtime, the result of measurement shows that not only soil dust but also anthropogenic aerosols, including sulfur, enriched trace metals such as Pb, Ni, Zn. Cu, Cr, As, Se, Br, are transported to Gosan in springtime. This study combines the size- and time-resolved aerosol composition measurements with isentropic, backward air-mass trajectories in order to identify some potential source regions of anthropogenic aerosols. As a result, during the NYS period, the average concentration of PM$_{10}$ was 46$\mu\textrm{g}$/㎥, Si, Al. S, Fe, Cl, K, Ca were higher than 1,000 ng/㎥ and Ti was about 100 ng/㎥. The concentrations of Zn, Mn, Cu. Pb, Br, Rb, V, Cr, Ni. At, Se ranged between 1 and 70 ng/㎥. More than 50% typical soil elements, tuck as Al, Si, Fe, Cd. Ti, Cr, Cu, Br. were distributed in a coarse particle range(5.0-12${\mu}{\textrm}{m}$). In other hand, anthropogenic pollutants, luck as S, N, Vi, were mainly distributed in a fine particle range (0.09-0.56${\mu}{\textrm}{m}$). During the YS period, PM$_{10}$ increased about 8 times than NYS period, and main soil elements, such as Al, Si, S, K, V, Mn, Fe also doubled in coarse particle range (1.15-12${\mu}{\textrm}{m}$). But Zn, As, Pb, Cu and Se, which distributed in the time aerosols (0.09-0.56${\mu}{\textrm}{m}$), were on the same level with or decreased than NYS period. Finally. except the YS Period, coarse particles (2.5-12${\mu}{\textrm}{m}$) are inferred to be influenced by soil, coal combustion, waste incineration, ferrous and nonferrous sources through similar pathways with Yellow Sand. But fine particles have different sources, such as coal combustion, gasoline vehicle, biomass burning, oil or coal combustion, nonferrous and ferrous metal sources, which are transported from China, Korea peninsula and local sources.ces.

이동식 LNG 야드트랙터 충전 기준 개발 연구 (A Study on Development of Mobile LNG Yard Tractor Refueling Standards)

  • 류영돈;유철희;이동원;구본득
    • 한국가스학회지
    • /
    • 제22권6호
    • /
    • pp.59-64
    • /
    • 2018
  • 정부에서는 미세먼지 저감대책의 일환으로 항만에서 운행하는 트랙터(야드트랙터, YT)의 연료를 디젤에서 LNG로 전환하는 사업을 추진중에 있다. 그런데, 야드트랙터의 보유대수가 적은 항만의 경우에는 BOG (Boil off gas) 발생 문제 등으로 인해 고정식 충전소를 설치하여 LNG를 YT에 공급하는 것이 곤란하다. 따라서, 이에 대한 대안으로 소규모의 이동식 LNG YT 충전소 설치 기준 마련이 필요하다. 본 연구에서는 이동식 LNG YT 충전소의 국내 도입을 위해 국내외 이동식 LNG 충전사례 및 충전 기준 조사, LNG 사고 사례 등을 조사하고, 사고 원인에 따른 위험경감 방안을 제시하였다. 또한, 제시된 위험 경감 방안을 토대로 도시가스사업법 시행규칙 개정(안)을 제시하였다. 제시한 이동식 LNG YT 충전 기준은 보호시설과의 안전거리 유지, 허가된 충전장소 이외의 장소에서 충전이 불가하도록 하는 인터록 장치 설치, 생체인식을 통한 신원확인 시스템 설치, 충전 전 탱크로리와 견인차량 분리 및 바퀴 고정상태 확인 등 사고예방을 위한 안전조치, 액확산방지조치, 충전 전 중 후의 안전조치 기준 등이다. 본 연구에서 제시한 안전기준은 향후 이동식 LNG 자동차 충전 기준 마련시 참고자료로 활용될 수 있을 것이다.