• Korean Chemical Engineering Research
• /
• 제49권1호
• /
• pp.41-46
• /
• 2011

본 연구에서는 수직 배관 내에서 석송자 농도 변화에 따른 분진화염전파 특성을 상세히 조사하였다. 이를 위해 디지털비디오카메라와 PIV(Particle Image Velocimetry)를 사용하여 높이 120 cm, 단면 12 cm의 정방형 수직 덕트 내를 전파하는 분진화염의 입자거동을 해석하였다. 그 결과, 배관 내에 동일 평균농도의 분진운이 존재하는 경우 상방전파보다 하방 전파에 의한 화염전파속도가 크며 농도 약 300 g/$m^3$까지의 경우에는 분진농도가 증가할수록 그 비율이 증가하였다. 후방 화염(Post flame)은 배관 측벽과 화염면 사이를 통과하여 전파화염 후방에 유입된 미연소 입자의 발화에 의한 것으로 배관의 밀폐조건과 관계없이 발생하였다. 또한 후방 화염의 발생 빈도는 농도의 증가와 함께 증가하는 것을 알았다.

• 한국산학기술학회논문지
• /
• 제18권1호
• /
• pp.715-723
• /
• 2017

이 연구에서는 고성능 시멘트 복합체의 잔골재 일부를 석분으로 대체하여 사용할 경우 재료의 성질 변화를 실험을 통해 살펴보았으며, 실험결과와 입도분포 특성과의 연관성을 여러 가지 모델들을 이용하여 분석하였다. 잔골재 중량 대비 0~30% 범위에서 석분을 치환한 시멘트 모르타르에 대해 유동성, 레올로지 특성, 강도 시험을 실시하였으며, 그 결과 석분 사용량이 증가함에 따라 유동성이 향상되고, 레올로지 정수(항복응력 및 소성점도)값이 감소하며, 압축강도 및 휨인장강도가 향상되는 것으로 나타났다. 이와 같은 실험결과는 모르타르를 구성하는 고체 입자들의 충전밀도와 밀접한 관련이 있으므로 최대 충전밀도를 얻기 위한 최적 입도분포 모델을 이용하여 그 영향을 분석하였다. 석분 사용량이 증가함에 따라 입자들의 입도분포가 최대 충전밀도를 얻기 위한 최적 입도분포에 더 가까워짐을 확인할 수 있었으며, 평균제곱근 오차를 이용하여 정량적으로 최적화 정도를 비교하였다. 석분 사용을 통한 입도분포 개선이 유동성의 향상과 소성점도의 감소, 그리고 강도의 향상에 미치는 영향은 관련한 여러 모델들을 이용하여 제시하였으며, 항복응력의 감소는 석분 사용에 따른 평균입경 크기의 증가와 관련이 있음을 보였다.

• 광물과 암석
• /
• 제35권4호
• /
• pp.397-407
• /
• 2022

황사 구성 광물의 지질학적 근원을 추적하기 위해, 발원지인 몽골 남부 고비사막 기반암의 광물학적 특성을 분석하였다. 황사 발원지 기반암은 고생대 화산암 및 화산쇄설성 퇴적암, 고생대 화강암류, 중생대 퇴적암으로 구성되어 있다. 고생대 화산암 및 퇴적암은 매우 치밀하게 고화 및 변형되어 산지를 형성하며, 중생대 백악기 퇴적암은 고생대 화산암 및 퇴적암으로 이루어진 산맥 사이의 분지를 충전한다. 고생대층 암석은 녹니석과 사장석 함량이 높고, 녹색편암상의 변성작용을 받았다. 중생대 퇴적암층은 녹니석이 드물고, 스멕타이트, 일라이트-스멕타이트 혼합층, 카올리나이트 등의 점토광물이 풍부하다. 고생대 화강암류에는 각섬석과 흑운모가 특징적으로 함유되어 있다. 발원지 기반암의 광물학적 특성과 비교하면, 황사는 고생대층과 중생대층 기원 쇄설물의 혼합물이나, 중생대 퇴적암에 더 가깝다. 점토 함량이 높고, 덜 고화된 중생대 퇴적암류는 잘 부스러져 침식되기 쉬운 실트질 표토가 되어 황사 광물 구성에 기여한다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2006년도 제33회 KOSCO SYMPOSIUM 논문집
• /
• pp.42-45
• /
• 2006

A new and reusable energy source is water-treatment sludges. There is a significant need for understanding the characteristics of sludge combustion related to improving efficiency and ensuring the safety of this new energy source. Because sludges are composed of solids and gas mixture, the combustion of the mixture may become quite complex. Not only decomposition of conventional organic elements but also dust explosion may be important during the process of converting sludges into a new and safe form of energy. Sludge combustion mainly involves hydrogen, methane, hydro carbons, carbon, and organic particles. Dust explosion during the gasification stage may depend on the surrounding temperature and the composition of gases. The uncertainty in the explosive behavior of energetic source is noted in this work. We study the explosion characteristics of sludge combustion while the reusability of sewage sludges as a new form of energy is also investigated.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.1388-1398
• /
• 2011

Air pollution in subway tunnel is primarily caused from the wear of metallic materials. As undesirable substance, PM(Particulate Matter) can especially harm the health of passengers and workers as well as clog the main parts of rolling stock such as inverters. To improve the air quality in subway tunnel, SMRT(Seoul Metropolitan Rapid Transit Corporation) has developed anti-pollution devices such as Magnetic Dust Collector, Vacuum Cleaner For Rail Road and Particulate Removing Sprinkler Vehicle. Introducing these mechanical devices, this paper is mainly devoted to explaining the characteristics of collected dust according to the result of particle-size analysis and componential analysis.

• 한국산업융합학회 논문집
• /
• 제21권3호
• /
• pp.133-139
• /
• 2018

Precipitator is the most widespread device used to separate dust particles from the exhaust gas. In the shipyard, welding umbrellas, spark protection covers, and ventilators are not purchased and used for the work place to capture the flames and high temperature metal dust generated during the gardening process. In particular, a thorough analysis of design factors, such as capture rate, collection capacity calculation, filter speed, and materials selection, is required since spatial constraints are followed by structures, etc. In this study, conceived to address problems such as this cyclone and filtration filter system that combines all-in-one gausing collector prototype. Assessed through interpretation through the validity of the design and reliability.

• 한국환경과학회:학술대회논문집
• /
• 한국환경과학회 2003년도 International Symposium on Clean Environment
• /
• pp.216-225
• /
• 2003

Fine particles with aerodynamic diameter less than 2.5 ${\mu}m$ (PM2.5) were collected from three sites in Beijing during April, August, and November 2000 and January 2001. After chemical components in samples are analyzed, a chemical mass balance (CMB) receptor model using PARs as tracers is applied to quantify the source contributions to PM2.5 in Beijing. The results show that the major sources are coal combustion, fugitive dust, vehicle exhaust, secondary sulfate and nitrate, and organic matter while biomass burning and construction dust contribute only a small fraction. In addition, source inventory in Beijing is used to determine the primary source contributions. The two methods result in comparable results. Source apportionment at three sampling sites presents similar contributions to PM2.5 although the sites are far away from each other. However, distinct seasonal pattern is presented for the source contributions from coal combustion, fugitive dust, biomass burning, secondary sulfate and nitrate.

• 통합자연과학논문집
• /
• 제3권2호
• /
• pp.84-88
• /
• 2010

Photonic crystals containing rugate structures from a single crystalline silicon wafer was obtained by using a sinoidal alternating current during an electrochemical etch procedure. Photonic crystals were isolated from the silicon substrate by applying an electropolishing current and were then made into particles by using an ultrasonic fracture in an ethanol solution to give a smart dust. Smart dusts exhibited their unique nanostructures and optical characteristics. They exhibited sharp photonic band gaps in the optical reflectivity spectrum. The size of smart dust obtained was in the range of 10-20 nm.

• 에너지공학
• /
• 제5권2호
• /
• pp.131-137
• /
• 1996

Typical size distribution of emission particulates is bi-modal in shape with particles in the fine mode (< 2.0 $\mu\textrm{m}$) and the coarse mode. An experimental study of pressure drop across the industrial gas cleaning filters has been conducted using particle mixture of fine alumina and coarse Arizona dusts with a rotating aerosol disperser to generate the bi-modal test aerosol. Pressure drop increased linearly with increasing mass loading. The pressure drop was found to be strongly dependent upon the mass ratio of fine to coarse particles. The smaller the mass ratio of fine to coarse particles and the higher face velocity are, the faster pressure drop rises. The fine particles and the greater inertia of the particle moving fast would cause a denser cake formation on the filter surface, resulting in a greater specific resistance to the gas flow.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.740-745
• /
• 2000

Effects of porous fences on the wind erosion of sand particles from a triangular pile were investigated experimentally. The porous fence and sand pile were installed in a simulated atmospheric boundary layer. The mean velocity and turbulent intensity profiles measured at the sand pile location were well fitted to the atmospheric boundary layer over the open terrain. Particle motion was visualized to see the motion of windblown sand particles qualitatively. In addition, the threshold velocity were measured using a light sensitive video camera with varying the fence porosity ${\varepsilon}$. As a result, various types of particle motion were observed according to the fence porosity. The porous wind fence having porosity ${\varepsilon}=30%$ was revealed to have the maximum threshold velocity, indicating good shelter effect for abating windblown dust particles.