• Journal of Korea Foundry Society
• /
• v.21 no.5
• /
• pp.290-295
• /
• 2001

We fabricated test samples containing various shape elements and surface roughness checking points for the jewelry cast master patterns by employing the 3D computer aided design (CAD), selective laser sintering (SLS) rapid prototype (RP) with the DuraForm powders. We varied the alignment angle from $0^{\circ}$ to $10^{\circ}$ at a given layer thickness of 0.08 and 0.1mm, respectively, in RP operation. Dimensions of the shape elements as well as values of surface roughness are characterized by an optical microscope and a contact-scanning profilometer. Surface roughness values of the top and vertical face increased as the alignment angle increased, while the other roughness values and shape elements variation were not depending on the alignment angle. The resolution of the shape realization was enhanced as the layer thickness became smaller. The minimum diameter of the hole, common in jewelry design, was 1.2 mm, and the shrinkage became 12% at the 1.6 mm-diameter hole, Our results implied that we face down the proposed design elements with $0^{\circ}$ alignment angle, and consider the shrinkage effect of each shape element in DuraForm RP jewelry modeling.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.3 no.2
• /
• pp.110-114
• /
• 2002

The master pattern manufacturing process is one of the most important processes in jewelry industry because the process takes 20% of total jewelry manufacturing costs. The previous jewelry manufacturing process has many steps of "rough design${\leftrightarro}$ detailed drawing${\leftrightarro}$ wax pattern manufacturing ${\leftrightarro}$ lime soda flask mold manufacturing ${\leftrightarro}$ silver master pattern manufacturing ${\leftrightarro}$ mass production of wax pattern ${\leftrightarro}$ investment casting process ${\leftrightarro}$ final jewelry product." A novel process that reduces processing steps by using a rapid prototyping system (RP) has been suggested. The process is "3D CAD design ${\leftrightarro}$ DuraForm mold manufacturing by RP ${\leftrightarro}$ manufacturing master pattern by low melting alloy ${\leftrightarro}$ mass production of wax pattern ${\leftrightarro}$ investment casting process${\leftrightarro}$ final jewelry product." Molds are made with DuraForm powder, of which melting temperature is 19$0^{\circ}C$, by a selective laster sintering type RP. An alloy of Pb-Sn-Bi-Cd, of which melting temperature is $70^{\circ}C$, is casted in the DuraForm molds. Spheres and rings of diameter 20 mm are made by this process. The dimension deformation rate is less than 2%, and the post processing of the castings is convenient. The casting made by the suggested process can be used as a master pattern of jewelry products.of jewelry products.

• Journal of Korean Neurosurgical Society
• /
• v.49 no.3
• /
• pp.175-177
• /
• 2011

Subdural empyema is a rare form of intracranial sepsis associated with high morbidity and mortality. The most frequent cause is extension of paranasal sinusitis through emissary veins or of mastoiditis through the mucosa, bone, and dura mater. Development of subdural empyema after pyogenic meningitis is known to be very unusual in adults. We report a rare case of fatal subdural empyema, an unusual complication of pyogenic meningitis. Our bitter experience suggests that subdural empyema should be borne in mind in patient with pyogenic meningitis who exhibit neurological deterioration.

• Journal of Korea Foundry Society
• /
• v.22 no.5
• /
• pp.265-270
• /
• 2002

A novel jewelry master pattern manufacturing process which reduce manufacturing steps by employing a Duraform rapid prototyping mold and a low melting alloy has been suggested. The novel process follows the steps of 'jewelry 3D CAD design ${\rightarrow}$ Durafrom RP mold ${\rightarrow}$ low melting alloy master pattern' while the previous process follows more complicated steps of 'jewelry idea sketch ${\rightarrow}$ detailed drawing ${\rightarrow}$ wax carving ${\rightarrow}$ flask ${\rightarrow}$ silver master pattern.' An upper and a lower part of molds have been manufactured of Duraform powder, of which melting point is $190^{\circ}C$. A maser pattern was manufactured by pouring a low melting alloy of Pb-Sn-Bi-Cd, so called Woods Metal, of which melting point is $70^{\circ}C$, into the mold. The master pattern is a shape of a disk of 20mm diameter that contains various design factors. The variations of dimensions, surface roughness, surface pore ratio were measured by an optical microscope, a surface roughness profilometer, and a Rockwell hardness tester. The pattern made of were maeasured by an optical microscope, a surface roughness profilometer, and a Rockwell hardness tester. The pattern made of low melting alloy has sufficient surface hardness, and surface pore ratio to be used as the jewelry master pattern.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.32 no.1
• /
• pp.152-157
• /
• 2005

Hypophosphatemia rickets, also known as Vitamin D-resistant rickets(VDRR) and refractory rickets, is a form of rickets which is resistant to the usual doses of vitamin D. VDRR is characterized by decreased renal tubular reabsorption of inorganic phosphate and is easily diagnosed by a normal blood calcium, hypophosphatemia, and slightly elevated alkaline phosphatase. Clinical features of Hypophosphatemia rickets included lateral bowing deformities of the legs, short stature, scoliosis, and enlargement of wrist and ankles. Dental finding in patient with VDRR were spontaneous dental abscesses in caries free teeth and other dental findings included delayed eruption, delayed apical closure, thin and hypoplastic enamel, absent or poorly defined lamina dura, enlarged pulp chambers, and numerous accessory canals and pulp horns that extend up and into the dentinoenamel junction. we reported the clinical feature and treatment of VDRR child who was referred from the department of pediatrics for early loss of primary teeth and its treatment.

• Anatomy and Cell Biology
• /
• v.56 no.4
• /
• pp.435-440
• /
• 2023

Few studies have examined the basilar venous plexus (BVP) and to our knowledge, no previous study has described its histology. The present anatomical study was performed to better elucidate these structures. In ten cadavers, the BVP was dissected. The anatomical and histological evaluation of the intraluminal trabeculae within this sinus were evaluated. Once all gross measurements were made, the clivus and overlying BVP were harvested and submitted for histological analysis. A BVP was identified in all specimens and in each of these, intraluminal trabeculae were identified. The mean number of trabeculae per plexus was five. These were most concentrated in the upper half of the clivus and were more often centrally located. These septations traveled in a posterior to anterior direction and usually, from inferiorly to superiorly however some were noted to travel horizontally. In a few specimens the trabeculae had wider bases, especially on the posterior attachment to the meningeal layer of dura mater. More commonly, the trabeculae ended in a denticulate form at their two terminal ends. The trabeculae were on average were 0.85 mm in length. The mean width of the trabeculae was 0.35 mm. These septations were consistent with the cords of Willis as are found in the lumen of some of the other intradural venous sinuses. An understanding of the internal anatomy of the BVP can aid in our understanding of venous pathology. Furthermore, this knowledge will benefit patients undergoing interventional treatments that involve the BVP.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.43 no.4
• /
• pp.452-460
• /
• 2016

Burkitt lymphoma (BL) is an aggressive form of non-Hodgkin's B-cell lymphoma found primarily in the pediatric population. In the oral cavity, this tumor can grow rapidly and often brings about facial swelling or development of an exophytic mass involving the jaws. A 5-year-old boy was referred for swelling and pain in the left mandibular area. The patient showed diffuse swelling on the left side of the mandible and firm-moderate tenderness upon palpation. An intraoral examination showed moderate mobility and sensitivity to percussion on the left primary first and second molars, without severe caries. A radiographic examination revealed complete loss of the lamina dura on the left primary second molar and permanent first molar. There was a radiolucent osteolytic lesion and destruction of the cortical bone of the left mandibular body. Based on the clinical, radiographic, and immunohistochemical findings, the patient was diagnosed with BL, and was referred to a pediatrician for systemic evaluation and intensive chemotherapy. Even before the completion of chemotherapy, the swelling resolved and the displaced teeth were relocated to a normal position. This patient showed a good prognosis due to prompt diagnosis and intensive chemotherapy. Early diagnosis and referral for treatment can prevent the development of BL.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.36 no.2
• /
• pp.298-304
• /
• 2009

XLH (X-linked hypophosphatemic rickets) is a form of rickets which is resistant to the usual dose of vitamin D and inherited in a X-linked dominant manner. It is also known as vitamin D-resistant rickets or familial hypophosphatemic rickets. Here we report a 6-year-and-6-month-old female patient of XLH who is diagnosed with in SNUB. She was referred from local clinic for impaction of maxillary left permanent incisor and its treatment. She presents bowing deformities of the legs, short stature, enlargement of wrist and ankles and spontaneous dental abscesses of clinically sound teeth delayed eruption, taurodontism, delayed apical closure, enlarged pulp chambers, and absent or poorly defined lamina dura. The purpose of this case is to review the literatures of XLH and report the dental and medical characteristics of this patient.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.8 no.1
• /
• pp.1011-1034
• /
• 1966

This thesis is the final report which has long been studied by the author to obtain the design basis for various hydrological constructions with the specific system suitable to the natural environmental conditions in Korea. This report is divided into two parts: one is to estimate runoff volume from watersheds and the other to estimate the peak discharge for a single storm. According to the result of observed runoff record from watersheds, it is known that Kajiyama formula is useful instrument in estimating runoff volume from watersheds in this country. But it has been found that this formula shows us 20-30% less than the actual flow. Therefore, when wihed to bring a better result, the watershed characteristics coefficient in this formula, that is, f-value, should be corrected to 0.5-0.8. As for the method to estimate peak discharge from drainage basin, the author proposes to classify it in two ways; one is small size watershed and the other large size watershed. The maximum -flood discharge rate $Q_p$ and time to peak Pt obtained from the observed record on the small size watershed are compared by various methods and formulas which are based upon the modern hydrological knowledge. But it was fou.d that it. was not a satisfied result. Therefore, the author proposes. tocomputate $Q_p$, to present 4.0-5.0% for the total runoff volume ${\Sigma}Q$.${\Sigma}Q$ is computed under the assumption of 30mm 103s in watershed per day and to change the theoritical total flow volume to one hour dura tion total flow rate when design daily storm is given. Time to peak Pt is derived from three parameters which are u,w,k. These are computed by relationship between total runoff volume (ha-m unit)and $Q_p$. (C.M.S. unit). Finally, the author checked out these results obtained from 51 hydrographs and got a satisfied result. Therefore the author suggested the model of design dimensionless unit-hydrograph. And the author believes that this model will be much available at none runoff record river site. In the large size watersheds in Korea when the maximum discharge occurs, the effective rainfall is two consequtive stormy days. So the loss in watershed was assutned as 6Omm/2days,and the author proposed 3-hour-daration hydrograph flow distribution percentage. This distribution percentage will be sure to form the hydrograph coordinate.