• Bulletin of the Korean Chemical Society
• /
• 제33권8호
• /
• pp.2675-2678
• /
• 2012

Studies on niobium anodization in the mixture of 1 M $H_3PO_4$ and 1 wt % HF at galvanostatic anodization are described here in detail. Interestingly, duplex niobium oxide consisting of thick barrier oxide and correspondingly thick porous oxide was prepared at a constant current density of higher than 0.3 $mAcm^{-2}$, whereas simple porous type oxide was formed at a current density of lower than 0.3 $mAcm^{-2}$. In addition, simple barrier or porous type oxide was obtained by galvanostatic anodization at a single electrolyte of either 1 M $H_3PO_4$ or 1 wt % HF, respectively. The formation mechanism of duplex type structures was ascribed to different forming voltages required for moving anions.

• Fisheries and Aquatic Sciences
• /
• 제13권1호
• /
• pp.18-25
• /
• 2010

Interest in plant-derived food additives has increased recently, with efforts to identify natural antioxidant sources to replace synthetic antioxidants. This study evaluated the antioxidant effects of organic solvent fractions of 80% methanol extracts from Pediastrum duplex and Dactylococcopsis fascicularis microalgae. Among the solvent fractions tested, the ethyl acetate and n-hexane fractions from P duplex effectively scavenged 79.8% and 74.5% of DPPH free radicals, respectively. The chloroform fraction from D. fascicularis showed the strongest $H_2O_2$ scavenging ability (49.7%). The greatest scavenging of hydroxyl radicals (73.1%) was exhibited by the 80% methanol extract from P duplex. Aqueous residue and ethyl acetate fraction from P duplex provided the strongest nitric oxide scavenging (57.7%) and metal chelating effect (82.1%), respectively. Chloroform and ethyl acetate fractions from P duplex and n-hexane fraction from D. fascicularis exhibited significantly greater inhibition of lipid peroxidation than the commercial antioxidants. These results suggested that P duplex and D. fascicularis microalgae having potential anti oxidative compounds with various properties could be utilized in the food and pharmaceutical industries.

• 한국주조공학회지
• /
• 제35권5호
• /
• pp.114-119
• /
• 2015

This paper reports the effect of a refractory crucible type on the microstructure of duplex stainless steel (DSS) cast with the addition of gadolinium using air-induction melting. Grade 4A DSSs with 1 wt% of gadolinium (Gd) were fabricated in various crucibles including alumina ($Al_2O_3$), magnesia (MgO), calcia (CaO) coated with yttria ($Y_2O_3$) and graphite. The standard free energies of the formation of calcium and yttrium oxide were lower than those of gadolinium oxide and other crucible elements based oxide. The yield of Gd in DSS using $Al_2O_3$, MgO, CaO-coated $Y_2O_3$ and graphite was 5, 19, 83 and 96%, respectively. As Gd yield increased, the amount of Gd-based inclusions increased, the size of the inclusions were reduced, and the inclusions became evenly distributed.

• Nuclear Engineering and Technology
• /
• 제49권4호
• /
• pp.744-751
• /
• 2017

The fatigue crack propagation behaviors of Z3CN20.09M duplex stainless steel (DSS) were investigated by studying oxide films of specimens tested in $290^{\circ}C$ water and air. The results indicate that a full oxide film that consisted of oxides and hydroxides was formed in $290^{\circ}C$ water. By contrast, only a half-baked oxide film consisting of oxides was formed in $290^{\circ}C$ air. Both environments are able to deteriorate the elastic modulus and hardness of the oxide films, especially the $290^{\circ}C$ water. The fatigue lives of the specimens tested in $290^{\circ}C$ air were about twice of those tested in $290^{\circ}C$ water at all strain amplitudes. Moreover, the crack propagation rates of the specimen tested in $290^{\circ}C$ water were confirmed to be faster than those tested in $290^{\circ}C$ air, which was thought to be due to the deteriorative strength of the oxide films induced by the mutual promotion of oxidation and crack propagation at the crack tip. It is noteworthy that the crack propagation can be postponed by the ferrite phase in the DSS, especially when the specimens were tested in $290^{\circ}C$ water.

• Journal of Welding and Joining
• /
• 제4권3호
• /
• pp.58-71
• /
• 1986

Mechanical and corrosion property of duplex stainless steel weldments made by the GTAW and SMAW process were studied. Fracture toughness, general and local corrosion resistance of GTAW and SMAW weldments were evaluated in terms of Charpy V notch impact test, anodic polarization diagram, pitting corrosion rate, respectively. SMA weld metal showed much lower impact toughness and higher ductile-brittle transition temperature than GTA weld metal. Fractographic and EDX analysis on fracture surface of SMA weld metal demonstrated the existence of (Si, Ti), oxide in large amounts. Potentiodynamic anodic polarization diagram of GMA weld metal showed much lower passive current density than SMA weld metal in 4% $H_2/SO_4$ solution. And pitting corrosion rate test showed the same tendency. Relating the microstructure, chemistry and property, it can be concluded that GTA weld metal gives better toughness due to lower oxygen content, i.e. lower inclusion content, and better corrosion resistance due to higher Pitting Index(PI) than SMA weld metal.

• Journal of Welding and Joining
• /
• 제5권3호
• /
• pp.38-45
• /
• 1987

An investigation was conducted to find out the factors influencing on the impact toughness of austenitic-and duplex stainless steel weld metal. Various welding process with commerically available consumables was adopted to get weld doposited metal. The oxygen content of each weld metal was very sensitiive to welding process, involving flux composition, shielding gas and structural features. The results of this study show tat the content of oxygen as an oxide inclusion significantly affects impact toughness, and .delta.-ferrite distribution is also correlated with resultant toughness value.

• Bulletin of the Korean Chemical Society
• /
• 제35권9호
• /
• pp.2749-2752
• /
• 2014

Recent studies have shown that single-stranded DNA adsorbed onto graphene oxide is protected from DNase I cleavage. However, double-stranded DNA bound to graphene oxide and could be digested by DNase I. To elucidate whether single-stranded DNA is protect from DNase I in the presence of graphene oxide, this study conducted DNase I digestion using single-stranded DNA and single-stranded DNA containing the duplex region in the presence of graphene oxide. Addition of DNase I resulted in restoration of the fluorescence emission that had been quenched when DNA was adsorbed to graphene oxide. It indicates that DNase I cleaved the adsorbed single-stranded DNA onto graphene oxide, which was sufficient for the detection of DNase I activity.

• 한국세라믹학회지
• /
• 제32권10호
• /
• pp.1162-1168
• /
• 1995

Systematic studies of the effects of additives and processing variables on the sintered density and the effect of crystalline forms of starting powders on the microstructure of pressureless sintered silicon carbide are described. Oxide additives were effective for the densification of SiC up to 96% of theoretical density at temperature as low as 185$0^{\circ}C$. Use of embedding powder increased the sintered density, up to 98% of theoretical density, by decreasing the weight loss during sintering. Composite type duplex microstructure has been developed due to the $\beta$longrightarrow$\alpha$ phase transformation of SiC by sintering at 185$0^{\circ}C$ and heat treatment at 195$0^{\circ}C$ for 1h.

• 한국에너지공학회:학술대회논문집
• /
• 한국에너지공학회 2000년도 추계 학술발표회 논문집
• /
• pp.105-109
• /
• 2000

종래의 핵연료소결체가 혼합산화물 혹은 이산화우라늄중 한가지 핵연료만으로 구성한 것과 달리 내부를 저농축 이산화우라늄 핵연료로 채우고 그 외부를 링형태의 혼합산화물 핵연료로 둘러 싼 이중구조를 특징으로 한다. 이러한 형태의 핵연료소결체는 중심영역의 핵분열반응률 줄임으로써 핵분열 기체생성, 핵연료봉 중심온도와 평균온도를 낮추어 준다. 이는 핵분열 기체방출을 낮추어 혼합산화물 핵연료봉 성능을 향상시키고 방출 연소도를 증가시키는 효과가 있다.

• 한국표면공학회지
• /
• 제27권3호
• /
• pp.123-133
• /
• 1994

Oxidation behavior of STS 304 and 430, produced by POSCO, Korea, was studied in order to study the surface defects formed during manufacturing processes. Oxidation experiments were carried out in a preheat-ed furnace at 850~$1, 250^{\circ}C$ in air and in a simulated coke oven gas(COG) atmosphere. The reaction products were examined by XRD, SEM and EDX on their surfaces and cross sections. Protective $Cr_2O_3$-primary oxide film was formed initially, but at critical point this film was broken and a duplex scale consisting of $Fe_2O_3$- and Fe$Cr_2O_4$- was formed. It was more severely attacked in a simulated COG atmosphere than in air, and STS 304 was superior to STS 430 in oxidation resistance.