• 한국지진공학회논문집
• /
• 제10권5호
• /
• pp.85-97
• /
• 2006

성능보장설계는 교각이 완전한 소성회전성능을 발휘할 때까지 다른 구조요소들과 교각 자체가 취성파괴 되지 않도록 설계하여 교량 전체 시스템의 연성파괴를 보장하기 위한 것으로서, 현행 도로교설계기준에는 명시적으로 규정되어 있지 않으나 대부분의 외국 교량내진설계기준에 채택되어 있다. 성능보장설계에서는 철근콘크리트 교각의 휨 초과강도를 구하고 이를 변환한 전단력을 교각, 기초, 말뚝에 작용하는 횡하중 설계전단력으로 결정하여 교각의 전단설계, 기초설계, 말뚝설계를 수행하도록 규정한다. 이 때 교각의 최대 소성모멘트를 결정하는 방법은 설계기준별로 각기 다른데, 이는 각 국의 재료 시공환경이 다르기 때문이다. 본 연구에서는 국내에서 사용하는 철근의 인장강도 측정치 3,407개와 콘크리트 압축강도 측정치 5,405개의 분석을 통하여 재료 초과강도계수를 제안하였고, 이를 적용하여 휨 초과강도를 결정하는 방법을 제시하였으며, 1,500개의 교각단면에 대한 모멘트-곡률 해석을 수행한 후 통계분석을 통하여 우리나라 실정에 적합한 초과강도계수를 제안하였다.

• 콘크리트학회논문집
• /
• 제21권2호
• /
• pp.169-178
• /
• 2009

현행 도로교설계기준의 철근콘크리트 교각 심부구속 횡방향철근량 산정식은 중심축력을 받는 기둥에서 콘크리트 피복이 탈락된 후 콘크리트 심부만으로 저항하는 축강도가 콘크리트 피복이 탈락되기 이전의 축강도 이상이 되기 위하여 필요한 횡구속 철근비로서 콘크리트 압축강도, 횡방향철근 항복강도 및 단면적비율을 주요변수로 고려하고 있다. 이들 변수 중 피복두께에 따라 달라지는 전체단면적과 심부단면적의 단면적비율은 압축파괴 영역에서의 강도발현 측면을 고려한 변수이므로 교각과 같이 작용축력이 상대적으로 낮아 축력보다는 모멘트에 의해서 지배되는 인장파괴 영역의 연성거동 측면에서는 단면적비율이 미치는 영향은 크지 않다. 그러나 설계기준의 횡방향철근량 산정식 자체가 교각의 내진거동에 중요한 요소인 연성능력을 직접적으로 고려한 식이 아니기 때문에 단면크기가 상대적으로 작은 경우 또는 내구성 등의 확보 차원에서 콘크리트 피복두께가 증가하여 단면적비율이 과도하게 커지는 경우에는 교각의 시공성 및 경제성이 저하될 정도로 많은 횡방향철근량이 요구되는 문제점을 야기한다. 따라서 본 논문에서는 콘크리트 피복두께가 심부구속 횡방향철근량 산정식에 미치는 영향을 비교, 분석하고 보다 합리적인 내진설계를 위한 심부구속 횡방향철근량 산정식을 수정 제안하였으며 국내 외에서 수행된 실험 결과를 바탕으로 제안식의 안전율 및 타당성을 검증하였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제23권3호
• /
• pp.17-24
• /
• 2019

탄소섬유보강폴리머(CFRP)는 경량이며, 성형성 및 작업성이 뛰어나 보수보강재료로서 널리 사용되고 있다. 하지만, 연성재료인 철근과는 달리 CFRP는 취성재료이므로, 철근에서 사용되는 전통적인 설계접근 방법을 적용하는 것은 부적합하다. 연성재료인 철근은 항복이후 요소사이의 응력재분배가 이뤄져 복합요소의 거동은 평균화된다. 따라서 복합요소의 응력 평균은 단위요소의 평균과 같고, 표준편차는 더 작아진다. 따라서 연성재료의 설계값은 증가시킬 수 있으나, 안전측, 실무적 접근에서 고정값을 사용한다. 반면 취성재료의 경우, 응력재분배를 기대하기 어려워 복합요소의 거동은 더 약한 요소에 의해 결정된다. 이에 복합요소의 응력의 평균값과 표준편차는 감소한다. 따라서 취성재료의 설계값은 요소수가 증가할수록 감소한다. 이 논문에서는 취성재료에서 정규분포를 가지는 단위요소가 요소 결합에 따라 와이블 분포를 가지게 됨을 증명하고, 이를 반영하여 하중이 작용하는 면적에 따른 물성치의 보정식을 제안하였다.

• 콘크리트학회논문집
• /
• 제14권4호
• /
• pp.530-539
• /
• 2002

전단벽의 연성도 확보를 위한 단부횡보강 설계에 있어서, 현재 설계기준들은 경험적이며 강제적이다. 즉, 현재 설계기준은 연성도 요구량에 관계없이 단부횡보강영역과 상세를 정해 놓고 있으며, 따라서 성능기초설계에 부적합하다. 본 연구의 목적은 성능기초설계에 적합한 전단벽의 연성도 설계방법을 개발하는 것이다. 단부횡보강영역에 따른 전단벽의 연성도변화를 조사하기 위하여 실험연구를 수행하였으며 압축대를 모델링하기 위하여 각기 다른 횡보강영역을 갖는 시험체에 편심축하중을 가력하였다. 실험연구를 통하여 횡보강된 벽체 압축대의 강도, 연성도, 파괴모드 등을 연구하였으며, 벽체 단면 전체에서 단부 횡보강으로 인하여 발생하는 연성도 및 파괴시점을 조사하기 위하여 비선형 수치해석을 수행하였다. 실험과 해석연구 결과를 기반으로 하여 전단벽의 연성도 설계방법을 개발하였다. 제안된 설계방법을 이용하여, 주어진 연성도 요구량에 맞게 단부횡보강영역과 횡보강량을 정확히 결정할 수 있으며, 따라서 벽체의 연성거동을 보장하는 동시에 경제적인 벽체설계가 가능하게 되었다.

• Computers and Concrete
• /
• 제16권3호
• /
• pp.357-380
• /
• 2015

In this study, a simple indeterminate strut-tie model which reflects complicated characteristics of the ultimate structural behavior of continuous reinforced concrete deep beams was proposed. In addition, the load distribution ratio, defined as the fraction of applied load transferred by a vertical tie of truss load transfer mechanism, was proposed to help structural designers perform the analysis and design of continuous reinforced concrete deep beams by using the strut-tie model approaches of current design codes. In the determination of the load distribution ratio, a concept of balanced shear reinforcement ratio requiring a simultaneous failure of inclined concrete strut and vertical steel tie was introduced to ensure the ductile shear failure of reinforced concrete deep beams, and the primary design variables including the shear span-to-effective depth ratio, flexural reinforcement ratio, and compressive strength of concrete were reflected upon. To verify the appropriateness of the present study, the ultimate strength of 58 continuous reinforced concrete deep beams tested to shear failure was evaluated by the ACI 318M-11's strut-tie model approach associated with the presented indeterminate strut-tie model and load distribution ratio. The ultimate strength of the continuous deep beams was also estimated by the experimental shear equations, conventional design codes that were based on experimental and theoretical shear strength models, and current strut-tie model design codes. The validity of the proposed strut-tie model and load distribution ratio was examined through the comparison of the strength analysis results classified according to the primary design variables. The present study associated with the indeterminate strut-tie model and load distribution ratio evaluated the ultimate strength of the continuous deep beams fairly well compared with those by other approaches. In addition, the present approach reflected the effects of the primary design variables on the ultimate strength of the continuous deep beams consistently and reasonably. The present study may provide an opportunity to help structural designers conduct the rational and practical strut-tie model design of continuous deep beams.

• Earthquakes and Structures
• /
• 제20권2호
• /
• pp.133-148
• /
• 2021

The paper presents a simplified force-based seismic design procedure for the preliminary design of steel haunch retrofitting for the seismic upgrade of deficient RC frames. The procedure involved constructing a site-specific seismic design spectrum for the site, which is transformed into seismic base shear coefficient demand, using an applicable response modification factor, that defines base shear force for seismic analysis of the structure. Recent experimental campaign; involving shake table testing of ten (10), and quasi-static cyclic testing of two (02), 1:3 reduced scale RC frame models, carried out for the seismic performance assessment of both deficient and retrofitted structures has provided the basis to calculate retrofit-specific response modification factor Rretrofitted. The haunch retrofitting technique enhanced the structural stiffness, strength, and ductility, hence, increased the structural response modification factor, which is mainly dependent on the applied retrofit scheme. An additional retrofit effectiveness factor (ΩR) is proposed for the deficient structure's response modification factor Rdeficient, representing the retrofit effectiveness (ΩR=Rretrofitted /Rdeficient), to calculate components' moment and shear demands for the retrofitted structure. The experimental campaign revealed that regardless of the deficient structures' characteristics, the ΩR factor remains fairly the unchanged, which is encouraging to generalize the design procedure. Haunch configuration is finalized that avoid brittle hinging of beam-column joints and ensure ductile beam yielding. Example case study for the seismic retrofit designs of RC frames are presented, which were validated through equivalent lateral load analysis using elastic model and response history analysis of finite-element based inelastic model, showing reasonable performance of the proposed design procedure. The proposed design has the advantage to provide a seismic zone-specific design solution, and also, to suggest if any additional measure is required to enhance the strength/deformability of beams and columns.

• Earthquakes and Structures
• /
• 제25권1호
• /
• pp.1-13
• /
• 2023

Reinforced concrete (RC) moment frames are used as lateral seismic load resisting systems in mid- and high-rise buildings in different regions of the world. Based on the seismic design provisions and construction details presented in design codes, RC frames with different levels of ductility (ordinary, intermediate, and special) can be designed and constructed. In Iran, there are RC buildings with various uses which have been constructed based on different editions of design codes. The seismic performance of RC structures (particularly moment frames) in real seismic events is of great importance. In this paper, the observations made on damaged RC moment frames after the destructive Sarpol-e Zahab earthquake with a moment magnitude of 7.3 are reported. Different levels of damage from the development of cracks in the structural and non-structural elements to the total collapse of buildings were observed. Furthermore, undesirable failure modes which are not expected in ductile seismic-resistant buildings were frequently observed in the damaged buildings. The RC moment frames built based on the previous editions of the design codes showed partial or total collapse in this seismic event. The extensive destruction of RC moment frames compared with the other structural systems (such as braced steel frames and confined masonry buildings) was attributed not only to the deficiencies in the construction practice of these buildings but also to the design procedure. In addition, the failure and collapse of masonry infills in RC moment frames were frequent modes of failure in this seismic event. In this paper, the main reasons related to design practice which led to extensive damage in the RC moment frames and their collapse are addressed.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2000년도 춘계 학술발표회 논문집 Proceedings of EESK Conference-Spring
• /
• pp.290-297
• /
• 2000

A new form of construction utilizing structural steel as the boundary elements in ductile flexural concrete walls is proposed to solve the bar congestion problems associated with such a heavily reinforced region. Two wall specimens containing rectangular hollow structural sections(HSS) and channels at their ends respectively were constructed rectangular hollow structural sections(HSS) and channels ar their ends respectively were constructed and tested under reversed cyclic loading to evaluate the construction process as well as the structural performance. One companion standard reinforced concrete wall specimen was also tested for the comparison purpose At an Initial stage all three specimens were carefully detailed to have the approximately same flexural capacity. Analysis and comparison of test results indicated that the reversed cyclic responses of the three walls showed similar hysteretic properties but in those with steel boundaries local bucking of the corresponding steel elements following significant yielding of structural steel was prominent. Design procedures considering local instability of the structural steel elements and the interaction between steel chord and concrete web members in such composite walls are presented.

• Earthquakes and Structures
• /
• 제5권6호
• /
• pp.625-655
• /
• 2013

This paper investigated the seismic behaviour of an innovated non-ductile precast concrete wall structural system; namely HC Precast System (HCPS). The system comprises load-bearing precast wall panels merely connected only to column at both ends. Such study is needed because there is limited research information available in design codes for such structure particularly in regions having low to moderate seismicity threats. Experimentally calibrated numerical model of the wall system was used to carry out nonlinear pushover analyses with various types of lateral loading patterns. Effects of laterally applied single point load (SPL), uniformly distributed load (UDL), modal distributed load (MDL) and triangular distributed load (TDL) onto global behaviour of HCPS were identified. Discussion was focused on structural performance such as ductility, deformability, and effective stiffness of the wall system. Thus, a new method for engineers to estimate the nonlinear deformation of HCPS through linear analysis was proposed.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 학회창립 10주년 기념 1999년도 가을 학술발표회 논문집
• /
• pp.601-604
• /
• 1999

The objective of this study is to investigate the flexural behavior of reinforced concrete columns confined by lateral ties. This test was carried on the twelve reinforced concrete columns, 200$\times$200$\times$800mm size. objected to flexure and constant axial loads. The main variables are concrete strength, the configuration of lateral ties and the amount of lateral ties. Test results indicated that steel configuration plays an important role in column behavior, and a proper configuration of lateral ties can be more ductile than the reduce of the space of lateral ties. By this experiment, the ductility of high-strength concrete columns designed on A.C.I Code is not adequate, and are concluded that the design of high-strength concrete column is executed by more lateral ties under high axial loads.