• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집E
• /
• pp.323-328
• /
• 2001

Supersonic coaxial, axisymmetric, jets issuing from various kinds of dual coaxial nozzles were experimentally investigated. Four different kinds of coaxial, dual nozzles were employed to characterize the major features of the supersonic, coaxial, dual jets. Two convergent-divergent supersonic nozzles with an impinging angle in the jet axis of the annular jets were designed to have the Mach number 2.0 and used to compare the coaxial jet flows with those discharging from two sonic nozzles. The primary pressure ratio was changed in the range from 4.0 to 10.0 and the assistant jet ratio from 1.0 to 4.0. The results obtained show that the assistant jets from the annular nozzle affect the coaxial jet flows and an increase of both the primary jet pressure ratio and assistant jet pressure ratio produces longer supersonic length of the dual, coaxial jet.

• 한국항공우주학회지
• /
• 제43권11호
• /
• pp.952-962
• /
• 2015

효율적인 추진기관 개발을 위해 여러 종류의 고도 보정 노즐에 대한 연구가 진행되고 있다. 본 논문에서는 향후 듀얼 벨 노즐 연구를 위한 기초자료로서의 활용을 위해 독일 DLR에서 수행한 연구내용을 바탕으로 듀얼 벨 노즐의 주요 특성을 조사하고 핵심 변수를 도출하였다. DLR은 다양한 실험을 통해 변곡각과 천이 NPR은 비례한다는 것과 확장부 길이와 측하중은 비례하지만 천이 NPR과 천이 지속시간과는 반비례한다는 것을 밝혔다. 성능 예측 과정을 통해 노즐의 형상이 결정될 수 있고 요구 성능에 맞게 변수간의 최적화가 필요하다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집B
• /
• pp.417-422
• /
• 2001

The shock structure of supersonic, dual, coaxial jet is experimentally investigated. Eight different kinds of coaxial, dual nozzles are employed to observe the major features of the near field shock structure of the supersonic, coaxial, dual jets. Four convergent-divergent supersonic nozzles having the Mach number of 2.0 and 3.0, and are used to compare the coaxial jet flows discharging from two sonic nozzles. The primary pressure ratio is changed in the range between 4.0 and 10.0 and the assistant jet pressure ratio from 1.0 to 4.0. The results obtained show that the impinging angle, nozzle geometry and pressure ratio significantly affect the near field shock structure, Mach disk location and Mach disk diameter. The annular shock system is found depending the assistant and primary jet pressure ratios.

• 한국CDE학회논문집
• /
• 제22권1호
• /
• pp.37-43
• /
• 2017

3D printing techniques can be used in various application fields and many researches have been reported. FDM (Fused Deposition modeling) can make multi-material or multi-color models with the simultaneous use of two or more filaments. In a dual-nozzle FDM printers, while the active nozzle is working, the remaining nozzle will be idle. The remaining molten resins inside an idle nozzle can ooze out unwantedly. The spill over from the resting nozzle produces unwanted remaining on the fabricated product. In this research, we suggest a method for optimizing building position of a model to minimize the unwanted spill-over that could possibly contaminate the final product. The method is based on minimizing the two intersection volumes. The first intersection volume is obtained by intersecting the volume defined by the first material and the Minkowski sum between the volume of the first material and the vector obtained by subtracting the center point of the first nozzle from the center point of the second nozzle. The second intersection volume can be obtained by reversing the role of the first and second volumes and nozzles. Some results obtained from the implementation using the Parasolid (Siemens) geometric modeling kernel is presented.

• 한국추진공학회지
• /
• 제5권2호
• /
• pp.51-58
• /
• 2001

본 연구에서는 이중동축노즐로부터 대기로 방출되는 초음속 자유제트유동을 실험하였다. 출구마하 수가 2.0이고 충돌각이 다른 축소확대노즐 및 출구마하수가 1.0이고 충돌각이 다른 축소노즐을 사용하고, 주제트 압력비와 보조제트 압력비를 각자 4.0∼10.0, 1.0∼4.0으로 변화시켜 가면서 자유제트 유동장 특성을 조사하였다. 본 연구의 결과로부터 보조제트 압력비가 동축자유제트유동 특성에 영향을 미치며, 주제트 및 보조제트 압력비가 증가할수록 동축제트의 초음속 길이도 증가한다는 것을 알았다.

• 한국추진공학회지
• /
• 제5권4호
• /
• pp.94-101
• /
• 2001

본 연구에서는 이중 동축 노즐로부터 대기로 방출되는 초음속 자유제트유동을 실험하였다. 출구마하수, 보조제트 충돌각 및 주제트 노즐 형상이 다른 8종류의 노즐을 사용하고, 주제트 및 보조제트 압력비를 각각 1.0∼10.0, 1.0∼4.0으로 변화시켜 노즐 출구 근방에서의 자유제트 유동장 특성을 상세히 조사하였다. 본 연구의 결과로부터 노즐의 형상 및 보조제트 분류각이 노즐 출구의 충격과 시스템에 영향을 미치며, 노즐출구로부터 마하디스크까지의 거리는 주제트 압력비가 증가할수록, 보조제트 압력비가 감소할수록 증가하나 마하디스크의 직경은 주제트 및 보조제트 압력비의 조합에 따라 달라진다는 것을 알았다.

• 한국기계가공학회지
• /
• 제10권6호
• /
• pp.102-108
• /
• 2011

The flow characteristics of unventilated dual impinging jets were experimentally investigated. Two nozzles with an aspect ratio of 20 were separated by 6 nozzle widths. The Reynolds number based on nozzle width and nozzle exit velocity was set to 5,000. A Particle Image Velocimetry (PIV) was used to measure turbulent velocity components. It was found that, when an impingement plate was installed in the converging region, there was a stagnation region in the inner area between nozzles. However, when it was installed in the combined region, both jets were merged and collided into the plate, showing single-jet characteristics. In addition, at a dual impinging jet, as the distance between a nozzle and an impingement plate decreased, the spanwise turbulent intensity at the plate increased.

• Journal of Advanced Marine Engineering and Technology
• /
• 제32권8호
• /
• pp.1231-1239
• /
• 2008

The characteristics of flow on unventilated dual jets was experimentally investigated. The two nozzles each with an aspect ratio of 20 were separated by 6 nozzle widths. Reynolds number based on nozzle width was set to 5,000 by nozzle exit velocity. All measurements were made over a range of nozzle-to-nozzle angles from $0^{\circ}$ to $25^{\circ}$. The particle image velocimetry and pressure transducer were employed to measure turbulent velocity components and mean static pressure, respectively. It was shown that a recirculation zone with sub-atmospheric static pressure was bounded by the inner shear layers of the individual jets and the nozzles plated. As nozzle-to-nozzle inclined angles were decreased, it was found that the spanwise turbulent intensity is greater than the streamwise turbulent intensity in the merging region. In the combined region, the velocity of dual jets agree well with that of single jet, but the turbulence intensity of dual jets not agree with that of single jet.

• Journal of Mechanical Science and Technology
• /
• 제17권12호
• /
• pp.2107-2115
• /
• 2003

A supersonic dual coaxial jet has been employed popularly for various industrial purposes, such as gasdynamic laser, supersonic ejector, noise control and enhancement of mixing. Detailed characteristics of supersonic dual coaxial jets issuing from an inner supersonic nozzle and outer sonic nozzles with various ejection angles are experimentally investigated. Three important parameters, such as pressure ratios of the inner and outer nozzles, and outer nozzle ejection angle, are chosen for a better understanding of jet structures in the present study. The results obtained from the present experimental study show that the Mach disk diameter becomes smaller, and the Mach disk moves toward the nozzle exit, and the length of the first shock cell decreases with the pressure ratio of the outer nozzle. It was also found that the highly underexpanded outer jet produces a new oblique shock wave, which makes jet structure much more complicated. On the other hand the outer jet ejection angle affects the structure of the inner jet structure less than the pressure ratio of the outer nozzle, relatively.

• 한국분무공학회지
• /
• 제17권2호
• /
• pp.94-99
• /
• 2012

The characteristics of spray behavior and injected amount were studied with two types of nozzles for using in a compression ignition engine with dual fuel technology for construction machines. A penetration length of spray tends to shorten due to a decrease of injected amount of a diesel fuel with dual fuel engine application. In order to ignite the gaseous fuel premixed with air during intake process, a diesel fuel, which was compression ignited, needs to penetrate somehow similar depth compared with the case of a diesel fuel-only-injection. In this work, a nozzle with reduced hole diameter and increased number of holes was tested and demonstrated that, compared to diesel 100% case, its penetration lengths are comparable to 74% and 79%, respectively, of those of 100% and 50% supply of a diesel fuel with the baseline nozzle that has four holes and 30.4% increased diameter. This will presumably enhancement the combustion in a dual fuel engine. A design suggestion was also made in this work to achieve similar penetration length of spray with diesel 100% case to prevent combustion from being deteriorated in a dual fuel engine.