• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2002.11a
• /
• pp.96-99
• /
• 2002

The dual band meandered PIFA has been designed, fabricated, and measured. The measured impedance bandwidth is 9.24% @2.45㎓ (2.27-2.49㎓) and 16.33% @5.75㎓(4.95-5.83㎓), repectively. The radiation patterns are similar to those of a typical PIFA. The antenna gains of each resonant frequencies are 5.06(@2.38㎓), 5.95(@5.39㎓) ㏈i respectively.

• Proceedings of the KIPE Conference
• /
• 1998.07a
• /
• pp.185-188
• /
• 1998

The recent flurry of activities and interest in Switched Reluctance Motor(SRM) has focused attention on various issues associated with implementing the SRM in the mass commertial Market. One such issue is the noise generated by radial force. In this paper, we proposed the circuit to reduce the noise of SRM using LC Resonant characteristic. The usefulness of proposed circuit is verified by experimental result.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.26 no.6
• /
• pp.437-445
• /
• 2021

This paper proposes an operating frequency design method that limits the voltage applied to aload-side converter during the initial operation of a loosely coupled resonant dual-active bridge (LCR-DAB) converter and an initial operating strategy that applies it. The LCR-DAB converter uses two wireless power transfer coils instead of the high-frequency transformer of the general DAB converter. The wireless power coil has a physical distance of several tens of millimeter or more between the two coils; thus, the LCR-DAB converter is a bidirectional isolated power conversion system that can easily achieve high insulation performance. However, for the initial operation of the LCR-DAB, if the power-side converter is operated at the resonance frequency while the load-side converter is not operating, then a very high voltage due to resonance is applied to the load-side converter, thereby causing damage to the converter. Therefore, a method that can stably charge the DC link voltage of the secondary-side converter during the initial operation is needed. This paper proposes a method to initially charge the secondary-side DC link by operating the primary-side converter at a frequency with limited voltage gain rather than at a steady-state operating frequency. The validity of the proposed frequency design method and initial operating sequence is verified through simulation and experimentation of the 1 KW LCR-DAB converter.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.219-220
• /
• 2006

In this paper, we designed and implemented the Dual Band Dipole Antenna with Tapered Microstrip Balun for WLAN Access Point. Two dipole antennas with different resonant frequency and the antenna structure combined additional line were implemented for dual band performance. In order to feed the balun current, the tapered microstrip balun was used. Produced the Dual Band Antenna shows a special quality. The quality is that all VSWR is less than 1.5 in the 2.4GHz and 5GHz frequency bands in 802.11 standards, and it profits not less than 1.7dBi having typical Dipole Antenna pattern the very "a form of 8"pattern and Omni-directional pattern.

• Proceedings of the KIPE Conference
• /
• 2013.07a
• /
• pp.362-363
• /
• 2013

기존 Fan Motor용 인버터의 경우, 높은 전압으로 인버터를 구동하기 때문에 높은 내압의 IPM을 사용해야 하는 문제점이 있다. 본 논문은 Fan Motor 구동용 인버터의 내압을 줄일 수 있는 Dual 공진 강압형 DC/DC 컨버터를 제안한다. 기존의 강압형 DC/DC 컨버터를 사용할 경우에는 큰 인덕터를 사용하기 때문에 회로의 전체적인 부피가 커지고 제작단가가 증가하는 단점이 있다. 반면 제안된 회로는 작은 크기의 인덕터를 사용한 Dual 공진 강압형 DC/DC 컨버터로써, 낮은 출력전압으로 인버터 구동이 가능하고, 영전압 스위칭을 하기 때문에 소형화 및 고효율화가 가능한 장점을 갖는다. 본 논문에서는 제안된 회로의 이론적인 특성을 분석하고 모의실험을 통해 확인하였으며, 1.8kW급 Fan Motor 구동용 인버터 회로에 적용하여 실험을 통해 우수성을 검증하였다.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.10
• /
• pp.2016-2021
• /
• 2009

In this paper, a dual-band antenna aimed for a mobile communication repeater was designed and measured. The operating frequency ranges are GSM(870${\sim}$960 MHz) and WCDMA(1920${\sim}$2170 MHz) bands. Experimental and numerical studies are performed for various design variables such as slot lengths. Using two meandering slots in the ground plane, we can obtain two higher resonant frequencies significantly with broader bandwidths. The measured maximum gain of antenna is 2 dBi in the GSM band and 2.45 dBi in the WCDMA band.

• 한국정보통신설비학회:학술대회논문집
• /
• 2008.08a
• /
• pp.433-436
• /
• 2008

In this paper, a novel compact broadband dual frequency microstrip antenna is presented. The meander type patch has been designed to have dual resonant frequencies, and the ground with slot was employed to expand the bandwidth in WCDMA band. The simulated results were obtained using HFSS, and the measurement on the proposed antenna was conducted in an anechoic chamber equipped with a network analyzer and a far field measurement system. As a result, measured maximum gain of antenna is 2.07$\sim$2.87 dBi in the GSM band and 3.91$\sim$5.61 dBi in the WCDMA band.

• Proceedings of the KIPE Conference
• /
• 2019.07a
• /
• pp.418-419
• /
• 2019

본 논문에서는 Dual-Bridge LLC 공진형 컨버터를 이용한 고효율 PV 스트링 Power Optimizer를 제안한다. 제안하는 Power Optimizer는 LLC 공진형 컨버터를 이용하여 모든 스위치의 ZVS 턴온 및 다이오드의 ZCS 턴오프를 성취하여 고효율을 달성할 수 있다. 또한 컨버터 토폴로지는 하프브릿지 회로와 풀브릿지 회로가 통합된 Dual-Bridge 구조를 적용하여 PV 스트링의 넓은 입력전압 범위(300V-900V) 조건에서도 정전압 출력이 가능하다. 본 논문에서는 6.25kW급 시작품 실험을 통하여 제안하는 Power Optimizer의 타당성을 검증하였다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.11
• /
• pp.23-29
• /
• 2008

This paper presents a new conceptual electromagnetic induction eddy current based stainless steel plate spiral type heater for heat exchanger or dual packs heater in hot water system boiler steamer and super heated steamer, which is more suitable and acceptable for new generation consumer power applications. In addition, an active clamping quasi-resonant PWM high frequency inverter using trench gate IGBTs power module can operate under a principle of zero voltage soft commutation with PWM is developed and demonstrated for a high efficient induction heated hot water system and boiler in the consumer power applications. This consumer induction heater power appliance using active clamping soft switching PWM high frequency inverter is evaluated and discussed on the basis of experimental results.

• Journal of Advanced Navigation Technology
• /
• v.16 no.1
• /
• pp.27-34
• /
• 2012

In this paper, Coplanar waveguide(CPW)-fed slot loop antenna, which is applicable to the dual band(2.4GHz~2.4835GHz, 5.15GHz~5.825GHz) for the wireless LAN, is proposed. In order to miniaturize the proposed antenna, slot loop is bent by meandering. The resonant frequencies in the required dual band are adjusted by variation of the resonant length of slot loop as well as slot width. In particular, use of capacitive coupling CPW feed provides impedance matching without a seperate matching circuit, because the amount of electromagnetic coupling can be controlled by the offset between feed and radiator. As a result, it has been observed that the proposed antenna satisfies not only the required return loss(${\leq}10dB$) but also has high efficiency(${\geq}80%$) over the whole frequency band. In order to check the validity of the proposed antenna, some simulated results for return loss and radiation pattern are presented in comparison with the measured results.