• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.6
• /
• pp.638-644
• /
• 2018

Relay systems have recently gained attentions because of its capability of cell coverage extension and the power gain as the one of key technologies for 5G. Relays can be exploited for small-cell base stations and the autonomous network, where communication devices communicate with each other cooperatively. Therefore, the relay technology is expected to enable the low power and large capacity communication. In order to maximize the benefits of using a limited number of relays, the efficient relay selection method is required. Especially, when two nodes exchange their data with each other via relay, the relay selection can maximize the average data rate by the spatial location of the relay. For this purpose, the average data rate is analyzed first according to the relay selection. In this paper, we analyzed the average data rate when two nodes exchange their data via dual-hop decode and forward relaying considering the interference by the concurrent transmission under Nakagami-m fading channel. The correctness of the analysis is verified by the Monte Carlo simulation. The results show that the concurrent transmission is superior to the non-concurrent transmission in the high required data rate region rather than in the low required data rate region.

• Journal of Broadcast Engineering
• /
• v.23 no.6
• /
• pp.855-865
• /
• 2018

Sound event detection is one of the research areas to model human auditory cognitive characteristics by recognizing events in an environment with multiple acoustic events and determining the onset and offset time for each event. DCASE, a research group on acoustic scene classification and sound event detection, is proceeding challenges to encourage participation of researchers and to activate sound event detection research. However, the size of the dataset provided by the DCASE Challenge is relatively small compared to ImageNet, which is a representative dataset for visual object recognition, and there are not many open sources for the acoustic dataset. In this study, the sound events that can occur in indoor and outdoor are collected on a larger scale and annotated for dataset construction. Furthermore, to improve the performance of the sound event detection task, we developed a dual CNN structured sound event detection system by adding a supplementary neural network to a convolutional neural network to determine the presence of sound events. Finally, we conducted a comparative experiment with both baseline systems of the DCASE 2016 and 2017.

• Journal of Biomedical Engineering Research
• /
• v.44 no.6
• /
• pp.450-464
• /
• 2023

Pulse oximetry, a non-invasive technique for evaluating blood oxygen saturation, conventionally depends on isolated measurements, rendering it vulnerable to factors like illumination profile, spatial blood flow fluctuations, and skin pigmentation. Previous efforts to address these issues through imaging systems often employed red and near-infrared illuminations with distinct profiles, leading to inconsistent ratios of transmitted light and the potential for errors in calculating spatial oxygen saturation distributions. While an integrating sphere was recently utilized as an illumination source to achieve uniform red and near-infrared illumination profiles on the sample surface, its bulkiness presented practical challenges. In this work, we have enhanced the pulse oximetry imaging system by transitioning illumination from an integrating sphere to a multi-wavelength LED configuration. This adjustment ensures simultaneous emission of red and near-infrared light from the same position, creating a homogeneous illumination profile on the sample surface. This approach guarantees consistent patterns of red and near-infrared illuminations that are spatially uniform. The sustained ratio between transmitted red and near-infrared light across space enables precise calculation of the spatial distribution of oxygen saturation, making our pulse oximetry imaging system more compact and portable without compromising accuracy. Our work significantly contributes to obtaining spatial information on blood oxygen saturation, providing valuable insights into tissue oxygenation in peripheral regions.

• Journal of Family Resource Management and Policy Review
• /
• v.28 no.2
• /
• pp.11-25
• /
• 2024

The purpose of this study is to compare the child care time, as well as the perceptions of and satisfaction with the time use, of fathers and mothers in dual-income families with preschool children. 444 time use data were gathered from the Statistics Korea Life Time Surveys in 2019. The results of this study are as follows. First, the total child care time of the two parents per family on a working day was 72.1 min on average, and more time was spent on primary care than on developmental care. Second, the father's child care time on a working day was 40.8 min on average, and the mother's time, almost three times more-110.3 min, which show a significant difference. By type of care, the mother's care time was about three times more than that of father for primary care, and about two times more for developmental care. Third, the mother's primary care time differed by household income level, and the primary care time of both fathers and mothers differed according to the number of their working hours weekly. Fourth, both fathers and mothers felt somewhat tired and had a time deficit, but mothers were less satisfied than fathers with the division of household tasks between them. To encourage fathers' voluntary participation in child care, they must be informed of their joint responsibility with their spouse as parents must be emphasized under the term "co-parenting." It is necessary to expand systems that support parental care and promote a family-friendly culture in workplaces to guarantee the rights of parents.

• Asia pacific journal of information systems
• /
• v.21 no.1
• /
• pp.1-27
• /
• 2011

In an attempt to cope with widespread, dynamic, and accelerating changes in both internal and external business environments, companies often utilize information technologies such as SCM(Supply Chain Management). To date, SCM research has mainly focused on the effects of dynamic factors on SCM success and emphasized adoption strategies and critical success factors. Consequently, the effects of more static factors such as interdependency between SCM partners have been largely ignored. The purpose of this study, therefore, is to examine the effects of both dynamic and static factors on SCM performance by controlling for information quality and partnership quality. The five factors examined in this study include innovative ness, mutual dependency, quality of information, partnership quality, and SCM performance. All factors were examined from the perspective of part suppliers, except the mutual dependency which was examined from two aspects: supplier's dependency on customer and customer's dependency on supplier. Data was collected through five hundred survey questionnaires distributed to the part supplier companies that have implemented SCM systems for at least one year. As a result, a total of 170 valid responses were obtained. A structural equation research model was fitted using SAS 9.1.3 and SMART-PLS 2.0. The results of this study can be summarized as follows. First, innovativeness positively affected SCM information quality. SCM partnership quality, and ultimately SCM performance. The path coefficient between innovativeness and information quality was 0.387, with a t-value of 3.528. Innovativeness also had a positively direct effect on partnership quality. The path coefficient was 0.351 with a t-value of 3.366. The total effect of innovativeness on partnership quality was significant, although its indirect effect on partnership quality by altering information quality was negligible. The total indirect effect of innovativeness on SCM performance by affecting information quality and partnership quality was significant with a p-value of 0.014. Innovativeness played an important role in determining SCM performance. Second, mutual dependency showed no significant effect on SCM information quality. This result contradicts the earlier assertion that the more dependent two companies are, the more accurate and timely the information they exchange ought to be. This study showed that this may not be the case; a partner may provide information of poor quality even when it is strongly dependent on the other. Mutual dependency showed significant effect on partnership quality. However, when the mutual dependency perceived by suppliers was divided into two parts, one being a supplier's dependency on its customer company and the other being a customer's dependency on the supplier, the latter showed a significant impact on the perceived SCM partnership quality. This result indicates that a customer company can hardly improve the partnership quality perceived by suppliers by making them more dependent. It improves only when the suppliers perceive that their partners, typically having more bargaining power, are more dependent on them. The overall effect of mutual dependency of any kind on SCM performance, however, was not significant. Although mutual dependency has been mentioned as an important static factor influencing almost every aspect of cooperation on a supply chain, its influences may not be as significant as it was initially perceived to be. Third, the correlation between information quality and partnership quality was 0.448 with a p-value of less than 0.001. Information quality had a path coefficient of 0.256 to partnership quality with a t-value of 2.940. The quality of information exchanged between partners may have an impact on their partnership quality. Fourth, information quality also had a significant impact on SCM performance with a path coefficient of 0.325 with a t-value of 3.611. In this study, SCM performance was divided into four categories: product quality, cost saving, service quality, and order fulfillment. Information quality has Significant impacts on product quality, cost saving and service quality, but not on order fulfillment. Fifth, partnership quality, as expected, had a significant impact on SCM performance. The path coefficient was 0.403 with a t-value of 3.539. Partnership quality, like information quality, had positive impacts on product quality, cost saving and service quality, but showed no impact on order fulfillment. It seemed that order fulfillment is the hardest category of performance that SCM can satisfy. One major limitation of this study is that it surveyed only the suppliers. To better understand the dual aspects of SCM, it is important to survey both suppliers and the assemblers, especially in pairs. This research, to our best knowledge, was the first attempt to study the level of dependency between the two groups by measuring the dual aspects of SCM and studying mutual dependency from the categories of suppliers and assemblers each.. In the future, a more comprehensive and precise measurement of SCM characteristics needs to be achieved by examining from both the supplier's and assembler's perspectives.

• Journal of Korea Port Economic Association
• /
• v.30 no.3
• /
• pp.231-257
• /
• 2014

In general, furniture industry, with its high foreign dependency, has serious logistics issues that are commonly raised in such countries as Korea, China and Japan. This leads to my different possibilities & ways of rationalizing the logistics systems that utilize port hinterlands. Thus the purpose of the present paper is to create new logistics systems which will work effectively across the three countries. In this research study, we came up with 2 logistics models in which the port hinterland of Busan serves as the distribution center for furniture industry, and the models were suggested as the cooperative logistics business systems for the North-east asian region. In the proposed models, 'Busan furniture logistics center' has the dual functions of 'the cross-docking center from China to Japan' and 'the assembly & delivery center for furniture imported by Japan'. To have this logistics business center materialized, we propose that policy-level supports from the relevant port authorities be provided in the following three aspects: overseas investment promotion focused on the furniture industry of Japan, protection & enhancement of competitiveness for the port of Busan, and uilization plans for the new port hinterland of the city.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.522-525
• /
• 2018

In this paper, we design a UWB / WAS microstrip antenna for wireless local high - speed communication. The substrate of the proposed antenna is FR-4 (er = 4.3) and its size is $30[mm]{\times}30[mm]$. It is designed to have characteristics that can be used in the frequency bands of 3.5 [GHz] and 5.2 [GHz], which are UWB / WAS frequency bands. The simulation was performed using CST Microwave Studio 2014. Simulation results show that the gain is 1.592 [dBi] at 3.5 [GHz] and 2.210 [dBi] at 5.2 [GHz]. The S-parameter also showed a result of less than -10 [dB] (WSWR 2: 1) in the desired frequency band. Microstrip antennas have been miniaturized, high performance, and light weight, and excellent and low cost systems are continuously being developed. In addition, many people use wireless local area network systems used in homes, companies, and public facilities. Since the UWB / WAS technology is proposed according to the development of the system and the demand increase, the antenna that satisfies the above conditions will be designed and the technology applicable to the system will be used more conveniently.

• International Area Studies Review
• /
• v.22 no.3
• /
• pp.221-251
• /
• 2018

Two-tier wage systems mean the dual wage systems that the new wage system require the new future employees to get much lower wage level, compared to the level of wages for existing employees under the existing wage system. While it allows employers to benefit from low-cost advantages, the two-tier wage systems is definitely a type of wage discrimination by the collusion between management and trade unions in that it forces the new future employee to accept the low wages. Also it reflects extreme collectivism which old union members try to keep having their jobs and wages at the sacrifice of future members' wages. The two-tier wage systems had been introduced by airplane industry in 1980s and introduced again in Big Three auto companies in 2007. The purpose of this paper is to examine the history, contents, and details of two-tier wage system in the United States and to think of the possibility of recurrence of the systems in the context of Korean auto industry in the near future. The tentative findings from this paper implies that the two-tier wage systems will likely happen in Korean auto industry because the collusion between trade unions and management are found easily and the degree of extreme collectivism favored by the old permanent union members is seriously high. It is time for trade unions to go back to their original ideals and purposes and to revitalize solidarity among workers.

• Korean Journal of Agricultural Science
• /
• v.31 no.1
• /
• pp.53-75
• /
• 2004

This study is aimed at identifying the national economic value of the irrigation facilities by reviewing the existing papers on economic values of the irrigation facilities and presenting current status of dual O & M problems of the irrigation facilities. This study suggested the unified O & M system rather than continuing the existing dual O & M system of irrigation facilities based on the surveyed results of the activities of irrigation fraternities in Chungnam Province. The findings and proposals for the successful unified and mono O & M system of the irrigation facilities are as follows: (1) Total number of irrigation facilities in the nation accounts for 67,582, while the total length of irrigation and drainage canals amounted to about 174,259km. On account of the total length of structural canals was estimated at 31%, much losses of water and much O & M costs have been inevitable for the full irrigation rice culture. In spite of the past heavy investment for irrigation facilities, the ratio of rain-fed and partially irrigated paddy fields accounts for 23% in 2003. Both Korea Agricultural and Rural Infrastructure Corporation (KARICO) and the city and Gun Governments have managed the irrigation facilities separately by irrigation fraternities. The KARICO have commanded 59% of irrigation paddy area with 18% of the total irrigation facilities, while the city and Gun governments covered 41% of irrigation paddy area with 82% of the existing number of irrigation facilities representing small and medium scale. (2) The 1999 demand prices of irrigation water per ton expressed in 2000 constant market price was estimated at 388 won, the supply price was amounted to 184 won per ton. Considering the supply and demand curve of the irrigation water, the existing irrigation facilities could not satisfy the demand of irrigation water. (3) In 1999, total present added value of the irrigation facilities during the economic life accounted for 48 trillion won, while total supply cost was 44.7 trillion won. The marginal benefit and cost ratio of irrigation water was 1.08. (4) The total O & M cost per year amounting to 681.1 billion won have been required to maintain and repair the existing irrigation facilities in Korea. For the successful unified O & M of irrigation facilities covering whole irrigated paddy field in Korea, 950 billion won of O & M costs are required to keep up the marginal benefit of irrigation water as 2,800 billion won per year. The total O & M cost as 950 billion won should be allocated 40%, 380 billion won for O & M costs of irrigation facilities and 60%, 570 billion won for improvement of irrigation facilities. (5) The study investigated and reviewed the present O & M status of the irrigation facilities by small and medium irrigation fraternities. Most of the farmers belong to the irrigation fraternities preferred not only unified O & M but also KARICO take-over of the whole O & M activities of the irrigation facilities. The prevailing O & M cost per 10a expended by the Corporation was amounted to 104,890 won, while that of city and Gun governments was only amounted to 4,600 won per 10a. regarding the small amount of O & M cost expended by city and Gun governments, it is evident that the existing irrigation system have been managed ineffectively and deteriorated the facilities comparing that of KARICO. In conclusion, the Government could not satisfied the demand of irrigation water by suppling water with existing irrigation facilities. Therefore new additional investment and financial support for irrigation water development should be made to convert rain-fed and partially irrigated paddy fields into fully irrigated ones. The operation and maintenance cost should be supported to keep the marginal values of rice production of existing irrigation facilities in the national economy and to modernize the obsolete irrigation facilities. By unifying the existing dual O & M systems, all the farmers belong to the irrigated paddy fields have to be equally benefited and could be increased their farm income and be stabilized their rural lives.

• Progress in Medical Physics
• /
• v.26 no.3
• /
• pp.143-152
• /
• 2015

In this study, we aim to design the architecture of the kV imaging system for tumor tracking in the dual-head gantry system and analyze its accuracy by simulations. We established mathematical formulas and algorithms to track the tumor position with the two-pair kV imaging systems when they are in the non-orthogonal positions. The algorithms have been designed in the homogeneous coordinate framework and the position of the source and the detector coordinates are used to estimate the tumor position. 4D XCAT (4D extended cardiac-torso) software was used in the simulation to identify the influence of the angle between the two-pair kV imaging systems and the resolution of the detectors to the accuracy in the position estimation. A metal marker fiducial has been inserted in a numerical human phantom of XCAT and the kV projections were acquired at various angles and resolutions using CT projection software of the XCAT. As a result, a positional accuracy of less than about 1mm was achieved when the resolution of the detector is higher than 1.5 mm/pixel and the angle between the kV imaging systems is approximately between $90^{\circ}$ and $50^{\circ}$. When the resolution is lower than 1.5 mm/pixel, the positional errors were higher than 1mm and the error fluctuation by the angles was greater. The resolution of the detector was critical in the positional accuracy for the tumor tracking and determines the range for the acceptable angle range between the kV imaging systems. Also, we found that the positional accuracy analysis method using XCAT developed in this study is highly useful and will be a invaluable tool for further refined design of the kV imaging systems for tumor tracking systems.