• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권9호
• /
• pp.4145-4164
• /
• 2016

Energy harvesting is an increasingly attractive source of power for cellular networks, and can be a promising solution for green networks. In this paper, we consider a cellular network with power beacons powering multiple mobile terminals with microwave power transfer in energy beamforming. In this network, the power beacons are powered by grid and renewable energy jointly. We adopt a dual-level control architecture, in which controllers collect information for a core controller, and the core controller has a real-time global view of the network. By implementing the water filling optimized power allocation strategy, the core controller optimizes the energy allocation among mobile terminals within the same cluster. In the proposed green energy cooperation paradigm, power beacons dynamically share their renewable energy by locally injecting/drawing renewable energy into/from other power beacons via the core controller. Then, we propose a new water filling optimized green energy cooperation management strategy, which jointly exploits water filling optimized power allocation strategy and green energy cooperation in cellular networks. Finally, we validate our works by simulations and show that the proposed water filling optimized green energy cooperation management strategy can achieve about 10% gains of MT's average rate and about 20% reduction of on-grid energy consumption.

• 한국산학기술학회논문지
• /
• 제17권3호
• /
• pp.103-108
• /
• 2016

본 연구의 목적은 MRI 검사 시 multitransmit 기법의 적용으로 인한 검사시간 단축의 유용성을 알아보고자 하였다. 연구방법은 2015년 7월부터 동년 9월까지 고관절 MRI 검사를 시행한 환자를 대상으로 multitransmit 기법 적용 전-후 고관절의 T1, T2 강조영상을 획득하여 대퇴골두와 장요근의 SNR과 CNR, 그에 따른 검사시간을 비교 평가하였다. 연구결과, multitransmit 기법 적용 전-후 T1, T2 강조영상 모두 SNR과 CNR은 유의한 차이가 없었으며, 검사시간은 적용 전에 비해 T1 강조영상은 42.8%, T2 강조영상은 49.7%로 감소하였다. 결론적으로 MRI 검사 시 본 연구와 같이 multitransmit 기법을 적용하면, 기존의 검사시간 단축관련 연구들에서 문제가 되었던 영상의 질 저하 없이 검사시간을 획기적으로 줄일 수 있으며, 향후 다양한 검사에 multitransmit 기법을 적용한다면 MRI 검사의 고질적 문제인 검사시간을 단축할 수 있어 매우 유용하리라 사료된다.

• 대한방사선기술학회지:방사선기술과학
• /
• 제41권5호
• /
• pp.413-419
• /
• 2018

Magnetic Resonance Imaging for patients with metallic implant has poor image quality, and signal loss and artifacts including distortion can occur. The purpose of this study is to carry out a comparative evaluation on high receive bandwidth(hiBW), O-MAR, O-MAR XD to reduce artifacts in knee implant. To take MRI, 3.0T scanner and dual-source radiofrequency transmission were used. O-MAR XD technique's strong option showed a significant difference (p<0.001) with O-MAR XD technique's weak option, O-MAR and hiBW excluding the medium option. O-MAR XD's medium option had a significant difference (p<0.01) with O-MAR XD's weak, O-MAR and hiBW. O-MAR XD technique's weak option had a significant difference (p<0.01) with O-MAR XD's strong and medium options, O-MAR and hiBW. O-MAR technique had a significant difference (p<0.001) with strong, medium, weak options of O-MAR XD technique except for hiBW. HiBW had a significant difference (p<0.001) with strong, medium and weak options of O-MAR XD technique except for O-MAR. The results showed that O-MAR XD technique was more useful for MRI scan for patients with knee replacement surgery than traditional techniques such as hiBW or O-MAR, and susceptibility artifacts decreased more when O-MAR XD technique's strong or medium option was applied. Based on the results above, it is considered that it will be possible to acquire images whose susceptibility artifacts were highly decreased by using O-MAR XD technique's strong or medium option when conducting MRI for artificial knee joint and it will be helpful for checking and monitoring patients with knee joint replacement.

• Earthquakes and Structures
• /
• 제12권1호
• /
• pp.13-21
• /
• 2017

Recent seismic events occurred in Italy (Emilia-Romagna 2012, Abruzzo 2009) and worldwide (New Zealand 2010 and 2011) highlighted some of the weaknesses of precast concrete industrial buildings, especially those related to the connecting systems traditionally employed to fasten the cladding panels to the internal framing. In fact, one of the most commons fails it is possible to observe in such structural typologies is related to the out-of-plane collapse of the external walls due to the unsatisfactory behaviour of the connectors used to join the panels to the perimeter beams. In this work, the strengthening of a traditional industrial building, assumed as a case study, made by precast reinforced concrete is proposed by the adoption of a dual system allowing the reinforcement of the structure by acting both internally; by pendular columns and, externally, on the walls. In particular, traditional connections at the top of the walls are substituted by devices able to work as a slider with vertical axis while, the bottom of the walls is equipped with two or more hysteretic dampers working on the uplift of the cladding panels occurring under seismic actions. By means of this approach, the structure is stiffened; obtaining a reduction of the lateral drifts under serviceability limit states. In addition, its seismic behaviour is improved due to the additional source of energy dissipation represented by the dampers located at the base of the walls. The effectiveness of the suggested retrofitting approach has been checked by comparing the performance of the retrofitted structure with those of the structure unreinforced by means of both pushover and Incremental Dynamic Analyses (IDA) in terms of behaviour factor, assumed as a measure of the ductility capacity of the structure.

• 한국정보통신학회논문지
• /
• 제14권9호
• /
• pp.2083-2090
• /
• 2010

본 논문에서는 고속 이동 컨테이너 화물을 효율적으로 검색하기 위한 스테레오 방사선 영상 기반 3차원 형상화 연구에 관하여 기술하였다. 스테레오 방사선 영상은 X-선 발생장치, 선형 방사선 센서 그리고 이동 스테이지로 구성한 일련의 장치로부터 실물을 대상으로 획득하였다. 두 개의 방사선 센서는 검색 대상체의 정류된 X-선 영상을 얻도록 설계 및 제작되었다. 스테레오 X-선 영상을 이용하여 두 영상간의 대응점을 찾는 매칭 알고리즘을 구현하고, 대상체의 실제 3차원 형상을 복원과정을 연구하였다. 대상체는 컨테이너 화물을 모사하기 위해 평형 철재 상자 내부에 넣은 다음 시험하였다. 3가지 대상체에 대해 스캔시험과 3차원 복원과정을 차례로 진행하였으며, 방사선 영상의 정보부족으로 인한 한계를 극복하기 위해 에지정보를 기반으로한 영상복원을 시도하였다. 시험결과는 제안한 기술이 컨테이너 화물 검색에서 보다 효율적인 정보를 제공할 수 있음을 확인시켜 주었다.

• 한국광학회지
• /
• 제15권1호
• /
• pp.17-21
• /
• 2004

S/S＋band에서 ITU-T의 50 ㎓격자에 맞는 채널을 가지는 광대역 파장가변 thulium첨가 광섬유레이저(TTDFL)를 개발하였다. 1.4$\mu\textrm{m}$및 $1.5\mu\textrm{m}$두 대역의 광원으로 펌핑되는 thulium첨가 광섬유(TDF)의 반전에 관한 분석을 통해, 대부분의 S/S＋band에서 파장을 가변할 수 있는 레이저를 구현하였다. 이 파장가변 레이저는 65.1nm의 넓은 3-㏈ 대역폭 내에서 6.7㏈m이상의 평탄한 출력 스펙트럼을 보여주었고, 생성된 DWDM채널 수는 178개에 달하였다. 또한 보조 펌프의 출력을 더 높일경우 66.2 nm까지도 대역폭을 넓힐 수 있었고, 공진기 내부 필터의 온도를 조절함으로써 레이저의 주파수를 더욱 안정화 할 수 있음도 보였다. 본 연구에서 개발된 이 레이저는 S/S＋band에서 기준 파장을 제공하는 유용한 광원으로 활용될 수 있다.

• 한국분무공학회지
• /
• 제13권4호
• /
• pp.212-219
• /
• 2008

To develop the twin-fluid atomizer having the excellent performance of painting, the spray characteristics of how a wide area can be painted efficiently by one time spraying were studied in this paper. Spray phenomena are affected by the many factors determining the spray field such as the spraying pressure of gas, the spraying pressure and viscosity of liquid paints, the opening duration of needle valve, the design dimension of nozzle, and so on. As the results of experiments, these factors affecting on spray characteristics were suggested as followings; 1) The optimum spraying pressure of gas was $0.015{\sim}0.02\;kPa$, and the appropriate spraying pressure of liquid paint was 0.01kPa, In these situations, the setting up pressures must be compensated as much as the losing amount of pressure because a decompression occurred when operating valves. 2) The duration of opening the needle valve must be sustained for $1{\sim}2$ seconds to inject gas after spraying the liquid paint. This operating of the needle valve was necessary to avoid the affect on the changing of liquid column length, and to prevent the droplet deposit at the initial time of spraying. 3) The spray tip penetration was gained form the experimental equation, and the effective spraying angle was $85^{\circ}{\pm}5^{\circ}$ just at he appropriate spraying pressure of gas. The distribution of the area sprayed had the variation in $350{\pm}50\;mm$ because of the spraying pressure of gas, the its distance from the spray tip, and the lift of the needle valve.

• 천문학회보
• /
• 제39권2호
• /
• pp.113.1-113.1
• /
• 2014

We propose a three-year Key Science Program (KSP) consisting of VLBI monitoring observations and single dish (SD) rapid response observations (RRO). The VLBI monitoring observations are comprised of ten 24-hr observations per year (every month) of about 30 gamma-ray brigt active galactic nuclei (AGNs) with Korea VLBI Network (KVN) at 22, 43, 86, and 129 GHz. The SD RROs may consist of twelve 7-hr observations per source (every week for 3 months after triggering) of gamma-ray flaring sources with two KVN SD telescopes at 22, 43, and 86 GHz in dual polarization. We expect one or two sources per year for the SD RROs. Gamma-ray flares of AGNs are known to be occured in innermost regions of relativistic jets which radiate in whole ranges of electromagnetic spectra due to synchrotron radiation, syschrotron self absorption, inverse-compton scttering, doppler boosting etc. Possible explanations of the gamma-ray flares in AGNs are a) shocks-in-jets propagating within jet flow and b) bending of the whole jets. For both cases, we should expect changes in polarization, luminosity, particle distribution, and structures of jets at mas-scale. The multifrequency simultaneous VLBI/SD observations with KVN are the best tool for detecting such changes correlated with gamma-ray flares. This KSP proposal aims to answer the fundamental questions about the basic nature of the flares of AGNs.

• 한국지능시스템학회논문지
• /
• 제14권3호
• /
• pp.357-362
• /
• 2004

언어 모델은 음성 인식이나 필기체 문자 인식 등에서 다음 단어를 예측함으로써 인식률을 높이게 된다. 그러나 언어 모델은 그 도메인에 따라 모두 다르며 충분한 분량의 말뭉치를 수집하는 것이 거의 불가능하다. 본 논문에서는 N그램 방식의 언어모델을 구축함에 있어서 크기가 제한적인 말뭉치의 한계를 극복하기 위하여 두개의 말뭉치, 즉 소규모의 구어체 말뭉치와 대규모의 문어체 말뭉치의 통계를 이용하는 방법을 제시한다. 이 이론을 검증하기 위하여 수십만 단어 규모의 방송용 말뭉치에 수백만 이상의 신문 말뭉치를 결합하여 방송 스크립트에 대한 퍼플렉시티를 30% 향상시킨 결과를 획득하였다.

• 한국식품영양과학회지
• /
• 제21권3호
• /
• pp.263-269
• /
• 1992

무청즙액을 식물녹엽단백질의 생산과 효모의 균체생산을 위한 두가지 목적으로 이용하는 연구를 하였다. 무청즙액을 80-10$0^{\circ}C$로 가열하거나 pH를 조정하여 침전시켰을 때 침전물의 양은 모두 무청즙액 1리터당 10.0-16.5g(평균 13.5g)이었고 이 침전물의 조단백질 함량은 25-30%이었다. 단백질을 침전시켜 제거한 여액은 전당의 함량이 1.0%정도 되게 희석하여 효모 Candida utilis를 배양하였을 때 무청 여액원액 1리터당 최고 19.59의 효모균체를 생산할 수 있었다. 따라서 무청즙액 1리터로부터 생산할 수 있는 고단백질자원은 33g이었다.