• JSTS:Journal of Semiconductor Technology and Science
• /
• 제8권2호
• /
• pp.156-163
• /
• 2008

We proposed a new $p^+/n^+$ gate locally-separated-channel (LSC) bulk FinFET which has vertically formed oxide region in the center of fin body, and device characteristics were optimized and compared with that of normal channel (NC) FinFET. Key device characteristics were investigated by changing length of $n^+$ poly-Si gate ($L_s$), the material filling the trench, and the width and length of the trench at a given gate length ($L_g$). Using 3-dimensional simulations, we confirmed that short-channel effects were properly suppressed although the fin width was the same as that of NC device. The LSC device having the trench non-overlapped with the source/drain diffusion region showed excellent $I_{off}$ suitable for sub-50 nm DRAM cell transistors. Design of the LSC devices were performed to get reasonable $L_s/L_g$ and channel fin width ($W_{cfin}$) at given $L_gs$ of 30 nm, 40 nm, and 50 nm.

• 열처리공학회지
• /
• 제21권5호
• /
• pp.235-243
• /
• 2008

Ni-C composite films were prepared using a combination of microwave plasma CVD and ion beam sputtering deposition working in a codeposition way. The structure of these films was characterized by energy-dispersive X-ray diffraction (EDXRD), transmission electron microscopy (TEM) and Raman spectroscopy. It was found that a nickel carbide phase, $Ni_3C$ (hcp), formed as very fine crystallites over a wide temperature range when Ni-C films were deposited at low $CH_4$ flow rates. The thermal stability of this nonequilibrium carbide $Ni_3C$ was also studied. As a result, the $Ni_3C$ carbide was found to decompose into nickel and graphite at around $400^{\circ}C$. With high $CH_4$ flow rates (> 0.2 sccm), the structure of the Ni-C films became amorphous. The formation behavior of the carbide and amorphous Ni-C phases are discussed in relation to the electrical resistivity of the films.

• 센서학회지
• /
• 제17권4호
• /
• pp.308-316
• /
• 2008

For the measurement of liquid level in ship's cargo tank, ballast tank, fuel oil tank and fresh water tank, several types of gauge meter are used such as tubular type, magnetic float type, reflex type transparent type and welding pad type. Among them, magnetic float type gauge meter is environmental friendly device because it is free of power source and maintenance. The main obstacle of the device is relatively large error bound. In this paper, finite element method is used to design and analysis of the magnetic float type gauge meter. The operation of reed switch according to the magnetic field has been successfully described and agreed well with experimental measurement. The optimum geometry with combination of permanent magnet and reed switches are designed to achieve 98 % accuracy of fluid level.

• Journal of Microbiology and Biotechnology
• /
• 제5권2호
• /
• pp.100-104
• /
• 1995

Production of $poly-{\beta}-hydroxybutyrate$ (PHB) in a strain of Azotobacter chroococcum, a nitrogen-fixing bacteria, was investigated at various levels of nitrogen and oxygen. Feeding nitrogen source increased both cell growth and PHB accumulation. Oxygen supply appeared to be one of the most important operating parameters for PHB production. Both cell growth and PHB accumulation increased with the sufficient supply of air in the fed-batch fermentation of the strain. However, it was also noted that keeping the oxygen level under limited condition was critical to achieve high PHB productivity. A high titer of PHB (52 g/l) with a high cellular content (60%) was obtained after 48 hr of fed-batch operation by controlling the oxygen supply. Dual limitation of nitrogen and oxygen did not further increase the PHB accumulation probably due to the greater demand for reducing power and ATP for nitrogen fixation.

• 노동경제논집
• /
• 제36권3호
• /
• pp.97-128
• /
• 2013

본 논문은 소득항목별 분해를 통해 남편과 아내 노동소득의 관계와 부부의 취업 비중 변화가 소득불평등에 미치는 효과를 분석하였다. 분석 결과, 남편과 아내 노동소득의 불평등 기여도가 차지하는 비중이 높게 나타났으며, 소득불평등 증가 시기에 맞벌이가구의 남편 소득과 아내 소득이 같은 방향으로 변화한 것으로 나타났다. 특히 노동소득의 불평등이 증가해 온 것은 아내와 (특히)남편의 취업비중이 2003년 이후 감소한 영향이 크며, 2008년 이후의 소득 불평등도의 개선은 주로 저소득가구 아내의 취업 비중 변화가 더 크게 기여한 것으로 분석되었다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume I
• /
• pp.398-401
• /
• 2006

Dual channel Radiometer for Earth and Atmospheric Monitoring (DREAM) is the main payload on Science and Technology SATellite-2 (STSAT-2) of Korea. DREAM is two-channel microwave radiometer with linear polarization, and operating at center frequencies of 23.8 GHz and 37 GHz. An equation for DREAM calibration is derived which accounts for losses and re-radiation in the microwave components of the radiometer due to physical temperature. This paper describes the radiometric calibration equation to get antenna temperature ($T_A$) from the measured output data. At lower altitude, the measured deep space temperature is contaminated by middle atmosphere and earth radiation. In this paper, we presented the detail mathematical formulation to find the altitude up to which cold source brightness temperature is not affected by earth and middle atmosphere radiation. The DREAMPFM data is used to calculate the performance parameters (linearity, sensitivity, dynamic range, and etc.) of the system.

• 한국보육지원학회지
• /
• 제14권3호
• /
• pp.1-19
• /
• 2018

Objective: The goal of this study were (1) to examine the type of parental time, (2) to investigate the family's characteristics that affect the parental time types. (3), to identify the differences in time satisfaction and time deficit according to the types of parental time of mothers with preschool children. Methods: The data source for this research was the 2014 Time Use Survey conducted by the Korea National Statistical Office(391 time diaries). Data were analyzed using K-means cluster analysis, multinominal regression, and ANOVA. Results: The results can be summarized as follows. First, parental time was classified into four groups; non-participation, play-centered, physical care-centered, unspecified group. Second, the characteristics of each type depended on children's age, mother's education level, mother's income, and dual earner families. Third, time deficit showed significant differences between play-centered and non-participation type. Conclusion/Implications: Based on the results, implications for policy regarding child care and labor were suggested.

• 한국전자통신학회논문지
• /
• 제2권4호
• /
• pp.215-221
• /
• 2007

IPv6는 IETF가 IPv4를 대체하기 위해 제안한 프로토콜이며, 기존 IPv4 네트워크와 새롭게 추가되는 IPv6 네트워크 간의 원활한 통신을 위해 다양한 메커니즘이 연구 및 개발되었다. IPv4/IPv6 전환 메커니즘 중 DSTM 터널링 방법은 IPv6 네트워크 내의 듀얼스택 호스트가 동적으로 IPv4 주소를 할당 받아 IPv4 주소만을 가지는 노드와 통신을 할 수 있으며, IPv6 네트워크에서 IPv4 전용 어플리케이션을 수정 없이 사용할 수 있다는 특징을 가지고 있다. 본 논문에서는 DSTM을 이용하는 네트워크에서 발생 가능한 DHCP 공격, TEP 공격, 소스 스푸핑 공격에 대한 보안 취약점들에 대해서 기술하고, 실험을 통하여 이를 확인하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 춘계학술대회 논문집 디스플레이 광소자 분야
• /
• pp.45-48
• /
• 2002

Poly(3-hexylthiophene) or P3HT based organic thin film transistor (OTFT) array was fabricated on flexible poly carbonate substrates and the electrical characteristics were investigated. As the gate dielectric, a dual layer structure of polyimide-$SiO_2$ was used to improve the roughness of $SiO_2$ surface and further enhancing the device performance and also source-drain electrodes were $O_2$ plasma treated for improvement of the electrical properties, such as drain current and field effect mobility. For the active layer, polymer semiconductor, P3HT layer was printed by contact-printing and spin-coating method. The electrical properties of OTFT devices printed by both methods were evaluated for the comparison. Based on the experiments, P3HT-based OTFT array with field effect mobility of 0.02~0.025 $cm^{2}/V{\cdot}s$ and current modulation (or $I_{on}/I_{off}$ ratio) of $10^{3}\sim10^{4}$ was fabricated.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(2)
• /
• pp.305-308
• /
• 2002

An 1.8V 6bit IGSPS ADC for high speed data acquisition is discussed in this paper. This ADC is based on a flash ADC architecture because the flash ADC is the only practical architecture at conversion rates of IGSPS and beyond. A straightforward 6bit full flash A/D converter consists of two resistive ladders with 63 laps, 63 comparators and digital blocks. One important source of errors in flash A/D converter is caused by the capacitive feedthrough of the high frequency input signal to the resistive reference-lauder. Consequently. the voltage at each tap of the ladder network can change its nominal DC value. This means large transistors have a large parasitic capacitance. Therefore, a dual resistive ladder with capacitor is employed to fix the DC value. Each resistive ladder generates 32 clean reference voltages which alternates with each other. And a two-stage amplifier is also used to reduce the effect of the capacitive feedthrough by minimizing the size of MOS connected to reference voltage. The proposed ADC is based on 0.18${\mu}{\textrm}{m}$ 1-poly 6-metal n-well CMOS technology, and it consumes 307㎽ at 1.8V power supply.