• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.6
• /
• pp.1047-1055
• /
• 2006

We patterned nano-width lines on a super hard bulk diamond substrate by varying the ion beam current and ion beam sources with a dual beam field ion beam (FIB). In addition, we successfully fabricated two-dimensional nano patterns and three-dimensional nano plate modules. We prepared nano lines on a diamond and a silicon substrate at the beam condition of 30 kV, 10 pA $\sim$ 5 nA with $Ga^+$ ion and $H_2O$ assisted ion sources. We measured each of the line-width, line-depth, etched line profiles, etch rate, and aspect ratio, and then compared them. We confirmed that nano patterning was possible on both a bulk diamond and a silicon substrate. The etch rate of $H_2O$ source can be enhanced about two times than that of Ga source. The width of patterns on a diamond was smaller than that on a silicon substrate at the same ion beam power The sub-100 nm patterns on a diamond were made under the charge neutralization mode to prevent charge accumulation. We successfully made a two-dimensional, 240 nm-width text of the 300-lettered Lord's Prayer on a gem diamond with 30 kV-30 pA FIB. The patterned text image was readable with a scanning electron microscope. Moreover, three dimensional nano-thick plate module fabrication was made successfully with an FIB and a platinum deposition, and electron energy loss spectrum (EELS) analysis was easily performed with the prepared nano plate module.

• Journal of radiological science and technology
• /
• v.46 no.1
• /
• pp.1-8
• /
• 2023

As the demand for bone mineral density testing increases in Korea, which is close to an aging society, it is necessary to evaluate the repeatability of equipment such as femur phantom other than l-spine for more accurate diagnosis. However, in clinical practice, it is often not possible to proceed such evaluation due to insufficient quality control conditions. Therefore, this study is to evaluate the usefulness of the femur phantom after fabricating the same using 3D printing technology. The femur phantom was output using GlowFill filament and FDM 3D printing type. Each phantom was repeatedly scaned 20 times to compare whether the existing l-spine phantom and the fabricated femur phantom were suitable as a phantom for quality control. Each time the seven researchers took three times, the location of the femur phantom was readjusted, and then scanned to confirm the error between the researchers. As a result of conducting repeatability evaluation using femur phantom, the coefficient of variation rate was 2%, which was within the minimum precision tolerance of 2.5%. The reproducibility between the researcher was also found to be suitable as the average coefficient of variation was 0.031 and the coefficient of variation rate was 3.1%, which was within the minimum precision error range of 5%. In conclusion, it is considered that the prospective attitude and usefulness of the femur phantom fabricated by 3D printing in clinical practice will be sufficient.

• Korean Journal of Veterinary Service
• /
• v.46 no.1
• /
• pp.15-27
• /
• 2023

Bordetella (B.) bronchiseptica, Mycoplasma (M.) cynos, and M. canis are the major bacterial pathogens that cause canine infectious respiratory disease complex (CIRDC). In this study, we developed a triplex real-time polymerase chain reaction (tqPCR) assay for the differential detection of these bacteria in a single reaction. The assay specifically amplified three bacterial genes with a detection limit of below 10 copies/reaction. The assay showed high repeatability and reproducibility, with coefficients of intra- and inter-assay variations of less than 1%. The diagnostic results of the assay using 94 clinical samples from household dogs with CIRDC clinical signs, the prevalence of B. bronchiseptica, M. cynos, and M. canis was 22.3%, 18.1%, and 20.2%, respectively, indicating that the diagnostic sensitivity was comparable to those of previously reported qPCR assays. The dual infection rate of B. bronchiseptica and M. cynos, B. bronchiseptica and M. canis, and M. cynos and M. canis was 5.3%, 7.4%, and 3.1%, respectively. Moreover, the triple infection rate of B. bronchiseptica, M. cynos, and M. canis was 2.1%. These results indicate that coinfections with B. bronchiseptica, M. cynos, and M. canis have frequently occurred in the Korean dog population. The newly developed tqPCR assay in the present study will be a useful tool for etiological and epidemiological studies on these three CIRDC-associated bacterial pathogens. The prevalence and coinfection data revealed through this study will contribute to expanding knowledge on the epidemiology of CIRDC in the recent Korean dog population.

• Economic Analysis
• /
• v.25 no.1
• /
• pp.66-122
• /
• 2019

As the Korean economy grew, employment expanded steadily, with the number of economically active people increasing and the employment-to-population rate also increasing. However, the working age population started to decline in 2017, and the employment of women and young people has been sluggish. The proportion of non-salaried workers in Korea is much higher than in other OECD countries, and is also excessive, considering Korea's income levels. In addition, the proportion of non-regular workers and the proportion of workers employed at small companies are particularly high among salaried workers. In light of these characteristics of Korean employment, the urgent problems facing the employment structure can be summarized by the deepening dual structure of the labor market, the increase in youth unemployment, sluggish female employment figures, and an excessive share of self-employment. Overall, it is seen that labor market duality is the main structural factor of the employment problems in Korea. Therefore, in order to fundamentally address this employment problem, it is necessary to concentrate policy efforts on alleviating labor market duality.

• Korean Journal of Radiology
• /
• v.24 no.5
• /
• pp.424-433
• /
• 2023

Objective: To assess the safety and efficacy of balloon dilatation under dual guidance using fluoroscopy and bronchoscopy for treating bronchial stenosis following lung transplantation (LT), and to elucidate the factors associated with patency after the procedure. Materials and Methods: From September, 2012, to April, 2021, 50 patients (mean age ± standard deviation, 54.4 ± 12.2 years) with bronchial stenosis among 361 recipients of LT were retrospectively analyzed. The safety of balloon dilatation was assessed by evaluating procedure-related complications. Efficacy was assessed by evaluating the technical success, primary patency, and secondary patency. Primary and secondary cumulative patency rates were calculated using the Kaplan-Meier method. The factors associated with patency after the procedure were evaluated using multivariable Cox hazard proportional regression analysis. Results: In total, 65 bronchi were treated with balloon dilatation in 50 patients. The total number of treatment sessions was 277 and the technical success rate was 99.3% (275/277 sessions). No major procedure-related complications were noted. During the mean follow-up period of 34.6 ± 30.8 months, primary patency was achieved in 12 of 65 bronchi (18.5%). However, the patency rate improved to 76.9% (50 of 65 bronchi) after repeated balloon dilatation (secondary patency). The 6-month, 1-year, 3-year, and 5-year secondary patency rates were 95.4%, 90.8%, 83.1%, and 78.5%, respectively. The presence of clinical symptoms was a significant prognostic factor associated with reduced primary patency (adjusted hazard ratio [HR], 0.465; 95% confidence interval [CI], 0.220-0.987). Early-stage treatment ≤ 6 months (adjusted HR, 3.588; 95% CI, 1.093-11.780) and prolonged balloon dilatation > 5 min (adjusted HR, 3.285; 95% CI, 1.018-10.598) were associated with significantly higher secondary patency. Conclusion: Repeated balloon dilatation was determined to be safe and effective for treating bronchial stenosis following LT. Early-stage treatment and prolonged balloon dilatation could significantly promote long-term patency.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.1 no.1
• /
• pp.37-44
• /
• 1998

Purpose: This study aimed at evaluating the therapeutic outcome, cost effectiveness and recurrence rate in children with H. pylori infection after the treatment using various medications. Methods: Seventy five children (mean age $11.4{\pm}2.5$ years) were given an endoscopy with biopsy and H. pylori status assessed by CLO test and histologic examination (Warthin Starry stain). Children were given one of following medications such as DA ($Denol^{(R)}$ and amoxycillin), OA (omeprazole and amoxycillin), DC ($Denol^{(R)}$ and clarithromycin) as primary treatment. And one of following medications such as DAM ($Denol^{(R)}$, amoxycillin and metronidazole), DC, OA, OC (omeprazole and clarithromycin) were used in children who failed the eradication of H. pylori. Results: The endoscopic diagnoses were: nodular gastritis (46 cases), gastric ulcer (9), duodenal ulcer (6), superficial gastritis (6), and normal (8). H. pylori eradication rate was 91% (63 of 69 children) on 4 weeks course of DA, 50% (1 of 2 cases who had treatment failure on DA) on DAM, and 75% (3 of 4 cases who treated on DC primarily) and 50% (1 of 2 cases who had treatment failure on DA) on DC, and 100% on OA (all of 2) and on OC (all of 1 who failed on DA). In 3 of 7 children in whom H. pylori had not been eradicated by primary medications (DA 6 and DC 1 case), H. pylori was re-eradicated by secondary medications (DA 1, DAM 1 and DC 1 case). But in remaining 4 cases, H. pylori infection persisted. Reinfection of H. pylori was found in 4 of 75 children between 3 months and 3 years after completion of the treatment of DA, yielding recurrence rate of 5.3%. In 2 of 4 cases who had relapsed, H. pylori was re-eradicated by secondary medications (OC 1 and DA 1 case). But in remaining 2 cases, H. pylori infection persisted. Conclusion: These results suggest that dual therapy with $Denol^{(R)}$ and amoxycillin is the effective medications in treating H. pylori infection in children. Concerning the cost effectiveness, it can be recommended as first line treatment of choice as well.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.34 no.4
• /
• pp.408-421
• /
• 1989

The effects of seeding and clipping termination dates, and seeding and fertilizer rates on forage and grain yields were evaluated in 1989 harvest year for dual production of forage and grain of naked and malting barleys in Cheju province. In the experiment I, 'Saessalbori' (naked barleY)1 and 'Doosan 22' (malting barley) were seeded on Sept. 21, Oct. 12 and Nov. 2, respectively. An unclipped(grain-only) treatment that was planted on Nov. 2 was included for check. In the experiment II, the two above cultivars were planted at seed rate of 14, 20 and 26 and kg/l0a. Fertilizer rates were 9-6-12, 17-13-8 and 22-16-11 (N-P$_2$O$\sub$5/-K$_2$O) kg/l0a. Seeding dates were Oct. 13 and Nov. 7 for clipped treatments and grain -only treatment(seeding rate: 14kg/l0a, N-P$_2$O$\sub$5/-K$_2$O=9-6-12 kg/l0a), respectively. All treatments in both experiments were harvested for grain yield. In Saessalbori, survival following forage removal was 100％ regardless of seeding and clipping termination dates, and seeding and fertilizer rates. In Doosan 22, survival percenage decreased with increasing seeding and fertilizer rates when plants was clipped in January to Febuary. Forage yield of two cultivars increased with early planting and delays in clipping termination and tended to increase as seeding and fertilizer rates were increased. Crude ash and fat were not affected by seeding and fertilizer rates, and clipping date. Crude protein increased with an increase in fertilizer rate and decreased with delays in clipping date. N free extract tended to increase with delaying clipping date and decreased with increasing fertilizer rate. Earlier planting resulted in earlier heading and maturity. Clipping slightly delayed heading of Saessalbori and greatly delayed that of Doosan 22. Maturity of Doosan 22 was delayed 3 to 5 days by increased fertilization. Clipping shortened culm length more severely in Doosan 22 than in Saessalbori. The later the clipping termination, the shorter the culm length. The number of spikes per m$^2$ and the number of kernels per spike were not affected by clipping in Saessalbori while those of Doosan 22 were decreased with delays in clipping termination. Delaying forage harvest resulted In a reduction in grain yield. However, final clipping on Feb. 27 reduced grain yield of Saessalbori by only 6-11 ％ compared to the grain-only treatment. In Doosan 22, forage harvest after Dec. 28 resulted in 6 to 66％ reduction of grain yield. The data indicate that grazing of naked and malting barleys until late Feb. and late Dec., respectively, might not reduce grain yields when planted on mid-Sept. to mid-Oct.

• The Korean Journal of Physiology
• /
• v.21 no.2
• /
• pp.241-257
• /
• 1987

The effects of external $Ca^{2+}$ and $Ca^{2+}-antagonists$ on the spontaneous contractions and electrical activities were investigated in guinea-pig stomach in order to clarify the mechanism for the generation of slow waves. Electrical responses of circular smooth muscle cells were recorded using glass capillary microelectrodes filled with 3 M KCl. All experiments were performed in tris-buffered Tyrode solution which was aerated with 100% $O_2$ and kept at $35^{\circ}C$. The results obtained were as follows: 1) The amplitude of spontaneous contractions was maximal at around 2-4 mM $Ca^{2+}$, whereas their frequency was inversely related with external $Ca^{2+}$ within the range of 0.5 to 16 mM $Ca^{2+}$. 2) Verapamil suppressed the amplitude of spontaneous contraction in a dose-dependent manner, while the frequency of spontaneous contractions was almost not changed over the whole concentration of verapamil $(0.01{\sim}5\;mg/l)$. 3) Manganese increased both the amplitude and the frequency of spontaneous contractions dose-dependently in low $Mn^{2+}$ (below 0.05 mM $Mn^{2+}$), while their amplitude and frequency were decreased in high $Mn^{2+}$ (above 0.1 mM $Mn^{2+}$). 4) The ampltude and maximum rate of rise of slow waves were incrased in high $Ca^{2+}$ solution. In $Ca^{2+}-free$ solution, the spontaneous contractions recorded simultaneously with slow waves ceased and tonic contraction ($Ca^{2+}-free$ contracture) was developed in parallel with membrane depolarization and the disappearance of slow waves. 5) Verapamil (1 mg/1) decreased the amplitude and maximum rate of rise of slow waves and it depolarized the membrane by about 6 mV, whereas the frequency of slow waves was not affected by verapamil. 6) Manganese showed different characteristic effects between low and high $Mn^{2+}$ on the slow waves: In low $Mn^{2+}$ (0.05 mM $Mn^{2+}$), the initial rapid increases and the subsequent gradual decreases in three parameters of slow waves (amplitude, rate of rise, and frequency of slow waves) till a new steady state were observed. However, in high $Mn^{2+}$ (0.5 mM $Mn^{2+}$) slow waves disappeared and membrane was depolarized. From the above results, the following conclusions could be made: 1) $Ca^{2+}$ is necessary for a generation of the slow waves, even though it is small amount. 2) Verapamil suppresses the spontaneous contractions of gastric antral strip by the decreases in amplitude and maximum rate of rise of slow waves, while this drug does not block the $Ca^{2+}-channel$ involved in the generation of slow waves. 3) Manganese has dual actions on the $Ca^{2+}-channels$; the $Ca^{2+}-channel$ involved in the generation of slow waves (or Na-Ca exchange system) or the channel for the generation of spike potentials are stimulated by a low concentration of $Mn^{2+}$, while both the $Ca^{2+}$. Channels are blocked by high concentration of $Mn^{2+}$.

• Journal of the Korean Society of Radiology
• /
• v.82 no.6
• /
• pp.1477-1492
• /
• 2021

Purpose Dedicated breast CT is an emerging volumetric X-ray imaging modality for diagnosis that does not require any painful breast compression. To improve the detection rate of weakly enhanced lesions, an adaptive image rescaling (AIR) technique was proposed. Materials and Methods Two disks containing five identical holes and five holes of different diameters were scanned using 60/100 kVp to obtain single-energy CT (SECT), dual-energy CT (DECT), and AIR images. A piece of pork was also scanned as a subclinical trial. The image quality was evaluated using image contrast and contrast-to-noise ratio (CNR). The difference of imaging performances was confirmed using student's t test. Results Total mean image contrast of AIR (0.70) reached 74.5% of that of DECT (0.94) and was higher than that of SECT (0.22) by 318.2%. Total mean CNR of AIR (5.08) was 35.5% of that of SECT (14.30) and was higher than that of DECT (2.28) by 222.8%. A similar trend was observed in the subclinical study. Conclusion The results demonstrated superior image contrast of AIR over SECT, and its higher overall image quality compared to DECT with half the exposure. Therefore, AIR seems to have the potential to improve the detectability of lesions with dedicated breast CT.

• Korean Journal of Occupational Health Nursing
• /
• v.4
• /
• pp.5-29
• /
• 1995

Occupational health services in Korea have been operated as dual types : one is operated by occupational health care manager and the other is health care agency without their own personnel. The performance of occupational health service should be different due to the variety of characteristics of health care manager and workplace, qualification of health care manager. This study is to analyze performance of occupational health care services with a particular consideration of job performance shape and efficiency, based on comparing those two types of health care management to show on the basic data for the settlement of more qualitative health care management system at workplace. For this study, total 391 places in Seoul and Inchon city area ; 154 places (39.4%) managed by designated health care manager and 237 places (60.6%) by the agency with their commission are selected as research samples. Tools for data collection are questionnares that have been investigated during the period of 20 September 1993-20 December 1993. Those data are compared with percentiles, mean, standard deviation and B/C ratio using SPSS PC program. Conclusions observed from the tests and each comparison could be summerized as follows : 1. Occupational health care have been accomplished at workplaces with designated people than with agencies people, and coverage rate of the occupational health care services has differences, due to management types. The reason of these results is due to visit only one or two times monthly by the agencies, while their own health care manager obsess, at the workplaces all the times. 2. Most of the expense for environmental control of all health care services expenditures shows that there is almost no fundamental improvement because more expenses are needed for procuring personal protective equipment and measuring work environment instead of environmental improvement. 3. It is investigated how much the cost of occupational health care services needs per worker, and calculated how much the cost needs per service hour per worker. The results from this show that the cost of occupational health services at workplaces with their own managers used less than the cost of health care agencies, eventually the former gives better services with less cost than the latter. 4. Benefit/Cost ratio is also produced by total benefit/total cost. The result from the above way reads 4.57 as a whole, while their own manager having workplaces reads 4.82 and the agencies do l.56. Even if their own manager performing workplaces spent more cost, this system produces more benefit than the agencies management. 5. The B/C ratio for medical organization such as local clinic, health care center and pharmacy shows more than or equal to at the workplaces controlled by the agencies. It is inferred that benefit would be much less than the cost used, with so being inefficient. 6. It is assumed that the efficiency ratio of health education is equal to reduction rate of workers medical organization visit. Estimated reduction rate 5%, 10%, 15%, show that the efficiency ratio of health education have an effect on producing benefits. It is estimated that more benefit can be produced if more qualitative education will be provided for enhancing health care efficiency. 7. Results of this study cannot be generalized because there are large scale of deviation in case of workplaces with less than 300 full time workers, but B/C ratio reads 2.69 as a whole and 3.25 at workplaces with their own health care manager are higher than 1.63 at the workplaces manged by the agencies. Finally, all the benefit concerning health care services could not be quantified, measured and shown on the value of money. This is a reason that a considerable part of benefits are so underestimated. This is also thought that measurement tools should be developed for measuring benefits of health care services with a comprehensive quantification. in the future. It is also expected that efficiency of occupational health care services should be investigated using cost-effectiveness analysis.