• 한국공작기계학회논문집
• /
• 제18권1호
• /
• pp.50-58
• /
• 2009

For precise tracking control of a servo system with nonlinear friction, a robust friction compensation scheme is presented in this paper. The nonlinear friction is difficult to identify the friction parameters exactly through experiments. Friction parameters can be also varied according to contact conditions such as the variation of temperature and lubrication. Thus, in order to overcome these problems and obtain the desired position tracking performance, a robust adaptive back-stepping control scheme with a dual friction observer is developed. In addition, to estimate lumped friction uncertainty due to modeling errors, a DEKF recurrent neural network and adaptive reconstructed error estimator are also developed. The feasibility of the proposed control scheme is verified through the experiment fur a ball-screw system.

• 전기학회논문지P
• /
• 제59권2호
• /
• pp.163-172
• /
• 2010

A robust positioning control system has been studied using a friction parameter observer and a recurrent fuzzy neural network based on the sliding model. To estimate a nonlinear friction parameters of the LuGre friction model, a dual friction model-based observer is introduced. In addition, an approximating method for a system uncertainty has been developed using a recurrent fuzzy neural network technique to improve positioning performance. Experimental results have been presented to validate the performance of a proposed intelligent compensation scheme.

• Transactions on Control, Automation and Systems Engineering
• /
• 제4권4호
• /
• pp.311-318
• /
• 2002

Two adaptive nonlinear friction compensation schemes are proposed for second-order nonlinear mechanical systems with a partially known nonlinear dynamic friction model to achieve asymptotic position and velocity tracking. The first scheme has auxiliary filtered states so that a simple open-loop observer can be used. The second one has a dual-observer structure to estimate two different nonlinear aspects of the friction state. Conditions for the parameter estimates to converge to the true parameter values are presented. Simulation results are utilized to show control performance and to demonstrate the convergence of the parameter estimates to their true values.

• 전자공학회논문지
• /
• 제51권1호
• /
• pp.202-208
• /
• 2014

로봇 시스템에 작용하는 마찰력은 비선형 형태이며 특히 저속에서의 정밀 제어를 어렵게 만든다. 본 논문에서는 로봇 연구에서 자주 활용되고 있는 벤치마크 로봇 시스템의 단축 모델에 대한 동적 마찰 보상 문제를 다룬다. 마찰 모델은 동적 특성 및 다양한 효과를 나타낼 수 있도록 비선형 동적 모델인 LuGre 모델을 고려한다. 본 논문에서 제안하는 제어기는 두 부분으로 구성된다. 동적 마찰의 추정 및 보상을 위해 Dual 관측기 기반의 적응 제어기를 사용한다. 마찰 추정 오차 및 나머지 외란을 보상하기 위해 PI 관측기를 추가로 설계한다. 모의실험을 통해 비선형 동적 마찰이 벤치마크 로봇 시스템의 제어 성능에 미치는 영향을 확인하고 제안된 제어기를 사용함으로써 동적 마찰에 대한 제어 성능이 향상됨을 보인다.

• 반도체디스플레이기술학회지
• /
• 제6권1호
• /
• pp.31-36
• /
• 2007

Effect of coulomb friction and backlash on the single loop position control has been studied for the precision position control. We have showed the limit cycle on the single loop system which used a ball screw that had the backlash. Also, we have made an inner loop with a classical velocity and torque controller which was forcing the current of d axis to be zero by using a permanent-magnet synchronous motor and composed the outer loop with linear encoder for sensing a position of the loader. Also, we have used least squares fit(LSF) observer for reducing noise when we got velocity from position outputs. We have shown a good result by using the dual loop through simulation and experiment.