• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제34회 춘계학술대회논문집
• /
• pp.133-137
• /
• 2010

하나의 고체 추진기관에서 이중펄스 추력을 발생시키는 기술은 기존의 일회성 추력발생 방식에 비하여 여러 가지 장점이 있다. 추진기관에 펄스분리장치를 적용하면 적절한 추력배분을 통하여 유도탄의 사거리 연장 및 종말속도를 향상시킨다. 본 연구에서는 격벽형 펄스분리장치의 성능을 검증하기 위하여 소형 추진기관을 설계, 제작하여 지상연소시험을 수행하였다. 이를 통하여 펄스분리장치의 파열특성, 구조적 안전성 및 내열특성 등을 확인하였으며 향후 실물형 이중펄스 추진기관 설계 시 필요한 데이터 등을 확보하였다.

• 한국추진공학회지
• /
• 제19권2호
• /
• pp.1-8
• /
• 2015

이중펄스 로켓 추진기관은 하나의 펄스분리장치에 의해 분리된 2개의 추진제 그레인을 가진 변형된 고체 추진기관이다. 이러한 추진기관의 주요 성능은 펄스분리장치 홀 면적대 노즐 목 면적비의 변화에 영향을 받는다. 본 연구에서는 펄스분리장치 홀 면적대 노즐 목 면적비 변화에 따른 내부유동특성을 고찰하기 위해 유동해석을 수행하였다. 유동해석에 사용된 기체로는 hot gas로 HTPB/AP계 복합추진제 연소가스와 cold gas로 질소가스롤 사용하였다. 이중펄스 로켓 추진기관의 내부유동해석 결과는 공압실험 결과와 비교 분석을 통해 검증하였다. 본 논문에서는 상용 CFD(Computational Fluid Dynamics) 코드인 ANSYS FLUENT V14.5를 이용하여 유동을 모사하였다.

• Journal of Power Electronics
• /
• 제18권1호
• /
• pp.137-146
• /
• 2018

This paper describes a single pulse-width modulation control strategy using the Single Pulse-Width Modulation (SPWM) method with a soft-switching technique for a wide range of output voltages from a bidirectional Dual-Active Bridge (DAB) converter. This method selects two typical inductor current waveforms for soft-switching, and proposes a rule that makes it possible to achieve soft-switching without any compensation algorithm from the waveforms. In addition, both the step-up and step-down conditions are analyzed. This paper verifies that the leakage inductance is independent from the rule, which makes it easier to apply in DAB converters. An integrated algorithm, which includes step-up and step-down techniques, is proposed. The results of experiments conducted on a 50-kW prototype are presented. The system efficiency is experimentally verified to be from 85.6% to 97.5% over the entire range.

• 한국군사과학기술학회지
• /
• 제18권1호
• /
• pp.93-99
• /
• 2015

The dual pulse rocket motor(DPRM) distributes the propellant energy effectively via pulse separation device(PSD) to improve the range and terminal velocity of the missile. There are two types of PSD such as bulk head type and thermal barrier type. A subscale thermal barrier type DPRM was designed, manufactured, and tested. The results showed good understanding of the characteristics of the PSD and will be applied to the design of the full scale DPRM.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2012년도 춘계학술논문집 2부
• /
• pp.804-807
• /
• 2012

본 논문에서는 펄스 레이저(LASER) 송신기에서 방사되는 펄스신호를 레이저 감시 시스템에서 실시간으로 수신하여 수신된 레이저 펄스들의 변화 패턴, 특히 Dual & Switch 신호의 패턴을 분석하는 방법에 대하여 기술하였다. Dual & Switch 신호는 펄스반복시간이 주기적으로 변경되어 펄스 패턴을 예측하기가 매우 어렵다. 본 논문에서는 펄스반복간격(PRI)의 차분을 이용하여 고정, 지터, Dual & Switch 신호의 패턴을 확인하는 방법을 제안하였다. 제안된 방법은 Dual & Switch 신호에 대한 신호 식별능력이 가능하여 레이저 감시시스템 등에 사용할 수 있을 것으로 판단된다.

• 전력전자학회논문지
• /
• 제17권2호
• /
• pp.142-149
• /
• 2012

The independently regulated dual-output LLC resonant converter using only one power stage and one control IC is proposed in this paper. The conventional dual-output LLC resonant converter requires the extra non-isolated DC/DC converter to obtain the tightly regulated slave output voltage, which results in the low power conversion efficiency and high production costs. On the other hand, since the proposed converter controls the master and slave output voltages by pulse width modulation(PWM) and pulse frequency modulation(PFM), it can achieve tightly regulated dual output voltages without the additional non-isolated DC/DC converter. Therefore, it features a high efficiency and low cost. To confirm the validity of the proposed converter, theoretical analysis and experimental results from a 40W LED driver prototype are presented.

• 전기전자학회논문지
• /
• 제10권2호통권19호
• /
• pp.109-115
• /
• 2006

본 논문에서는 FCC 규격을 만족하는 DS-UWB 통신을 위한 고차미분 가우시안 펄스 생성기를 제안하고, 이를 실험적으로 구현하였다. 100Mbps의 구형파를 가우시안 펄스로 변환하기 위해 두개의 SRB만을 이용한 가우시안 펄스 발생기를 제작하였다. 출력된 펄스는 330 psec의 펄스폭과 920 mV의 크기를 가진다. 또한 WLAN 대역을 제거하기 위해 마이크로스트립 라인과 병렬 스터브를 이용한 고차미분의 특성을 가지는 이중 대역통과 필터를 설계 및 제작하였다. 최종적으로 WLAN 대역을 -25dB 이상 억제를 하고, 시간축 상에서 1 nsec의 펄스폭과 25 mV의 크기를 가지는 13차 가우시안 펄스를 출력하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.179-185
• /
• 2005

This paper presents a novel circuit topology of a high efficiency single-phase power conditioner. This power conditioner is composed of time-sharing sinewave absolute pulse width modulated boost chopper with a bypass diode in the first power processing stage and time-sharing sinewave pulse width modulated full-bridge inverter in the second power processing stage operated by time-sharing dual mode pulse pattern control scheme. The unique operating principle of the two power processing stage with time-sharing dual mode sinewave modulation scheme is described with a design example. This paper proposes also a sinewave tracking voltage controlled soft switching PWM boost chopper with a passive auxiliary edge-resonant snubber. The new conceptual operating principle of this novel power conditioner related to new energy utilization system is presented and discussed through the experimental results.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.472-472
• /
• 2011

The capacitive coupled plasma (CCP) has been extensively used in the semiconductor industry because it has not only good uniformity, but also low electron temperature. But CCP source has some problems, such as difficulty in varying the ion bombardment energy separately, low plasma density, and high processing pressure, etc. In this reason, dual frequency CCP has been investigated with a separate substrate biasing to control the plasma parameters and to obtain high etch rate with high etch selectivity. Especially, in this study, we studied on the etching of $SiO_2$ by using the pulse-time modulation in the dual-frequency CCP source composed of 60 MHz/ 2 MHz rf power. By using the combination of high /low rf powers, the differences in the gas dissociation, plasma density, and etch characteristics were investigated. Also, as the size of the semiconductor device is decreased to nano-scale, the etching of contact hole which has nano-scale higher aspect ratio is required. For the nano-scale contact hole etching by using continuous plasma, several etch problems such as bowing, sidewall taper, twist, mask faceting, erosion, distortions etc. occurs. To resolve these problems, etching in low process pressure, more sidewall passivation by using fluorocarbon-based plasma with high carbon ratio, low temperature processing, charge effect breaking, power modulation are needed. Therefore, in this study, to resolve these problems, we used the pulse-time modulated dual-frequency CCP system. Pulse plasma is generated by periodical turning the RF power On and Off state. We measured the etch rate, etch selectivity and etch profile by using a step profilometer and SEM. Also the X-ray photoelectron spectroscopic analysis on the surfaces etched by different duty ratio conditions correlate with the results above.

• 전기학회논문지
• /
• 제59권5호
• /
• pp.939-944
• /
• 2010

A high voltage air-cored helical strip/wire type pulse transformer has been fabricated for charging of a high voltage pulse forming line. As a primary coil, copper strip of 25mm width was wound helically around a MC nylon cylinder. For a secondary coil, copper enameled wire of 1mm diameter was wound around conical cylinder in order to provide insulation between two windings. The coupling coefficient of 0.53 was obtained when two coils were combined coaxially in the insulation oil filled chamber. Voltage gain and energy transfer efficiency were investigated by varying the parameters of primary and secondary circuit. Test results shows that the voltage gain increases up to 17 with increasing the primary capacitance up to 200nF. And highest energy transfer efficiency of 44% was obtained when the dual resonant operation condition was nearly satisfied. The pulse transformer developed in this study can be used for charging the middle conductor of a Blumlein pulse forming line.