• 제목/요약/키워드: Dual Microscope

검색결과 35건 처리시간 0.021초

유아기우식증 치료를 위한 레진침투법에서 제단백제재의 사용 (A Modified Pretreatment with Deproteinization for Resin Infiltration in Early Childhood Caries)

  • 남시연;신종현;정태성;김신;김지연
    • 대한소아치과학회지
    • /
    • 제45권3호
    • /
    • pp.290-298
    • /
    • 2018
  • 이 연구는 유전치 비와동성 우식 병소에 레진침투법을 시행할 때 sodium hypochlorite(NaOCl) 제단백 후 phosphoric acid($H_3PO_4$) 산부식 처리에 따른 법랑질 표면구조 및 레진 침투깊이 변화를 알아보았다. 90개의 발치된 비와동성 병소의 유전치를 전처리에 따라 5개 군으로 나누었다 : I군 hydrochloric acid(HCl) 2분; II군 NaOCl 1분, $H_3PO_4$ 1분; III군 NaOCl 2분, $H_3PO_4$ 1분; IV군 NaOCl 1분, $H_3PO_4$ 2분; V군 NaOCl 2분, $H_3PO_4$ 2분. 그 중 15개는 전계방사주사전자현미경을 통해 표면을 관찰하였고, 75개는 레진침투 후 공초점레이저주사현미경을 통해 병소 깊이와 레진 침투깊이를 측정하여 레진 침투도를 도출했다. NaOCl 적용 시간이 길어질수록 법랑질 산부식 I, II형 비율이 증가하였다. 레진 침투도는 V군이 II, III군에 비해 통계학적으로 유의하게 높았고(p < 0.05), IV, V군은 유의할 만한 차이가 없었다. 레진침투법은 유전치 초기 우식 병소의 치료로 사용될 수 있으며, 전처리 제로 15% HCl 산부식 대신 5.25% NaOCl 제단백 후 35% $H_3PO_4$ 산부식이 대안으로 고려될 수 있다.

Comparison of periodontitis-associated oral biofilm formation under dynamic and static conditions

  • Song, Won sub;Lee, Jae-Kwan;Park, Se Hwan;Um, Heung-Sik;Lee, Si Young;Chang, Beom-Seok
    • Journal of Periodontal and Implant Science
    • /
    • 제47권4호
    • /
    • pp.219-230
    • /
    • 2017
  • Purpose: The purpose of this study was to compare the characteristics of single- and dualspecies in vitro oral biofilms made by static and dynamic methods. Methods: Hydroxyapatite (HA) disks, 12.7 mm in diameter and 3 mm thick, were coated with processed saliva for 4 hours. The disks were divided into a static method group and a dynamic method group. The disks treated with a static method were cultured in 12-well plates, and the disks in the dynamic method group were cultured in a Center for Disease Control and Prevention (CDC) biofilm reactor for 72 hours. In the single- and dual-species biofilms, Fusobacterium nucleatum and Porphyromonas gingivalis were used, and the amount of adhering bacteria, proportions of species, and bacterial reduction of chlorhexidine were examined. Bacterial adhesion was examined with scanning electron microscopy (SEM) and confocal laser scanning microscopy (CLSM). Results: Compared with the biofilms made using the static method, the biofilms made using the dynamic method had significantly lower amounts of adhering and looser bacterial accumulation in SEM and CLSM images. The proportion of P. gingivalis was higher in the dynamic method group than in the static method group; however, the difference was not statistically significant. Furthermore, the biofilm thickness and bacterial reduction by chlorhexidine showed no significant differences between the 2 methods. Conclusions: When used to reproduce periodontal biofilms composed of F. nucleatum and P. gingivalis, the dynamic method (CDC biofilm reactor) formed looser biofilms containing fewer bacteria than the well plate. However, this difference did not influence the thickness of the biofilms or the activity of chlorhexidine. Therefore, both methods are useful for mimicking periodontitis-associated oral biofilms.

저칼슘식이와 방사선조사가 백서하악과두에 미치는 영향에 관한 실험적 연구 (THE EFFECTS OF THE LOW CALCIUM DIET AND IRRADIATION ON THE MANDIBULAR CONDYLE OF RATS)

  • 안희문;이상래
    • 치과방사선
    • /
    • 제23권1호
    • /
    • pp.27-44
    • /
    • 1993
  • This study was performed to investigate the changes of mandibular condyle by low calcium diet and the effects of irradiation on the bone in osteoporotic state. In order to carry out this experiment, 80 seven-week old Sprague-Dawley strain rats weighing about 150 gm were selected and equally divided into one experimental group of 40 rats and one control group with the remainder. The experimental group and the control group were then subdivided into two group and exposed to irradiation. The two irradiation groups received a single dose of 20 Gy on the jaw area only and irradiated with a cobalt-60 teletherapy unit. The rats in the control and experimental groups were serially terminated by fours on the 3rd, the 7th, the 14th, and the 21st day after irradiation. After termination, both sides of the dead rats mandibular condyle were removed and fixed with 10% neutral formalin. The bone mineral density of mandibular condyle was measured by use of dual energy X-ray bone densitometer(model DDX-alpha, Lunn Corp., U. S. A.). The mandibular condyle was radiographed with Hitex HA-80(Hitex Co., Japan). Thereafter, the obtained radiographs were observed, and the mandibular condyle was further decalcified and embedded in paraffin as the general method. The specimen sectioned and stained with hematoxylin-eosin, PAS and Rabbit Anti-Human Tumor Necrosis Factor-a observed by a light microscope. The obtained results were as follows: 1. In the non-irradiated group with the low calcium diet, the bone mineral density of the condyle was markedly decreased after 14 days, and decrease the number of trabeculae of the condyle and resorption of the calcified cartilaginous zone were observed after 3 days. On microscopic observations, the number nd size of trabeculae were decreased after 7 days of experiment. 2. In the irradiated group with the low calcium diet, the bone mineral density of the condyle was markedly decreased after 14 days and resorption of the calcified cartilaginous zone and decrease the number and coarse of the trabeculae of the condyle were observed. These findings were extended rather than in non-irradiated group with low calcium diet. On microscopic observations, many osteoclasts were detected and the number and size of trabeculae were somewhat decreased after 7 days. Also there was degenerative changes of tissues of bone marrow on the 14th day but that condition was restored on the 21st day of experiment. 3. In the irradiated group with normal diet, the bone mineral density of the condyle was somewhat decreased with times and degree of decrease of the number of trabeculae was somewhat larger than in the non-irradiated group with normal diet. On microscopic observations, the tissues of bone marrow were atrophic and degenerative changes but that condition was restored on the 21st day of experiment. 4. In immunocytochemical findings, in the irradiated and non-irradiated groups with low calcium diet, negative or partial positive response to TNF was observed, but positive response in the normal diet groups.

  • PDF

FIB를 이용한 다이아몬드 기판 위의 나노급 미세 패턴의 형상 가공 (Nano-scale Patterning on Diamond substrates using an FIB)

  • 송오성;김종률
    • 한국산학기술학회논문지
    • /
    • 제7권6호
    • /
    • pp.1047-1055
    • /
    • 2006
  • 필드이온빔(FIB) 가공기를 써서 초고강도의 벌크다이아몬드를 가공하기 위해 이온 소오스의 종류와 가공 조건에 따른 나노급 미세 선폭의 최적조건을 알아보고 이에 근거한 2차원적인 텍스트의 가공과 3차원적인 박막요소의 가공을 시도하였다. 다이아몬드 기판과 실리콘 기판을 Ga과 $H_2O$ 소오스를 이용하는 FIB를 써서 30 kV 빔 전류를 10 pA $\sim$ 5 nA로 변화시키면서 패터닝하고 이때 각각 20 ${\mu}m$ 길이로 생성되는 선형 패턴의 선폭, 깊이, 에치속도, 에치형상, 깊이선폭비 (aspect ratio)를 확인하였다. 다이아몬드도 실리콘 기판과 마찬가지로 나노급 패턴의 형성이 가능하였다. $H_2O$ 소오스를 채용한 경우가 에치 깊이가 2배 정도 증가하였으며 동일한 가공 조건에서는 실리콘에 비해 다이아몬드의 에치 선폭이 감소는 경향이 있었다. 특히 다이아몬드는 절연성 때문에 차지가 축적되어 가공 중 이온빔이 불안정해지는 문제가 있었으나 차지 중화 모드를 이용하여 성공적으로 sub-100 nm급 선폭의 미세 가공이 가능하였다. 확인된 선폭가공 조건에 근거하여 2차원적으로 0.3carat의 보석용 다이아몬드의 거들부에 300여개의 글자를 FIB를 활용하여 선폭 240 nm정도로 명확히 기록하는 것이 가능하였다. $Ga^+$이온과 30 eV-30 pA로 조건에서 비교적 넓은 선폭과 Z축 depth 고정범위에서 많은 개인정보의 기록이 영구적으로 가능하였으며 전자현미경으로 재생이 가능하였다. 3차원적으로 두께 $1{\mu}m$의 박막요소를 FIB가공과 백금 용접으로 떼어낸 후 FIB가공으로 두께가 100 nm가 되도록 한 후 투과전자현미경을 이용하여 성분 분석을 하는 것이 성공적으로 수행될 수 있었다.

  • PDF

심미적 포스트 코어의 종류에 따른 미세누출에 관한 연구 (Microleakage of endodontically treated teeth restored with three different esthetic post and cores)

  • 박지근;박지만;박은진
    • 대한치과보철학회지
    • /
    • 제47권1호
    • /
    • pp.53-60
    • /
    • 2009
  • 연구목적: 오늘날 심미적 요구의 증가로 치아색 포스트 코어에 대한 많은 관심이 모아지고 있으며 다양한 연구가 진행 중이다. 현재 화이버 포스트 (ParaPost fiber White, Coltene Whaledent, Cuyahoga Falls, USA), 지르코니아 포스트 (CosmoPost, Ivoclar Vivadent, Schann, Germany) 등에 관한 논문은 다소 나와 있으나 요즘 여러 분야에서 관심을 받고 있는 CAD/CAM (computer-aided design/computer-aided manufacturing) 방식으로 지르코니아를 가공한 절삭형 지르코니아 포스트 코어에 대한 연구는 많지 않은 실정이다. 이 연구의 목적은 CAD/CAM을 이용한 지르코니아를 비롯하여 근관치료된 치아에서 사용된 세 가지 다른 치아색 포스트 코어에 대해 미세누출 (microleakage)을 비교해 보는 것이다. 연구 재료 및 방법: 발치된 건전한 상악 절치 27개를 채택하여 백악법랑질경계 (CEJ)에서 절단하여 근관치료를 시행하고, 세군 (각 9개)으로 나누었다. 각군들은 화이버 포스트와 콤포짓트 레진 코어 (1군), 지르코니아 포스트와 열가압형 세라믹 코어 (2군), CAD/CAM 절삭형 지르코니아 포스트 코어 (3군)로 수복하였다. $5-55^{\circ}C$ 1000회 열순환 처리 (thermocycling)를 시행하고, 2% 메틸렌 블루로 $37^{\circ}C$에서 24시간 염색하였다. 치아장축과 평행하게 순설방향으로 절단하여 미세누출을 현미경과 컴퓨터 프로그램을 사용하여 분석을 하였다. 데이터는 one-way ANOVA와 Scheffe's multiple range test (${\alpha}=0.05$)로 분석하였다. 결과: 모든 군에서 미세누출을 보였으며, 지르코니아 포스트와 열가압형 세라믹 코어군 (2군)에서 치근계면 입구에서는 다소 많은 미세누출을 보였으나 포스트 끝에 이르러서는 거의 미세누출이 없는 결과를 보였다. 화이버 포스트와 콤포짓트 레진 코어군 (1군)과CAD/CAM 절삭형 지르코니아 포스트 코어군 (3군)에서는 부위별로 균등한 미세누출을 보였다. 결론: 화이버 포스트와 콤포짓트 레진 코어군, 지르코니아 포스트와 열가압형 세라믹 코어군, CAD/CAM 절삭형 지르코니아 포스트 코어군 모두에서 미세누출을 보였고, 이 중에서 지르코니아 포스트와 열가압형 세라믹 코어군이 좀 더 큰 미세누출에 대한 저항성을 보였으며 화이버 포스트와 콤포짓트 레진 코어군, CAD/CAM 절삭형 지르코니아 포스트 코어군은 유사한 양상을 보였으나, 각 실험군 간에 통계적으로 유의한 차이는 인정되지 않았다. (P>.05)