• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2007.06a
• /
• pp.627-628
• /
• 2007

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.2
• /
• pp.306-312
• /
• 2014

The ZigBee communication method, which is the most frequently applied to the LED lighting control system, has drawbacks of low-speed and low-capacity, and the communication failure possibility due to environmental influences is on the rise. Therefore, it is important to secure the communication reliability by applying an integrated interface with a wire-wireless dual-network. This paper developed a communication module, which has a platform converging and combining the ZigBee of USN environments with the PLC of power line communication environments, to implement a dualized communication interface system supporting the wire-wireless integrated protocol, and implemented a wire-wireless networking device and a control system software technology. As a result, it was automatically switched into the PLC communication within 4.4 seconds on average when there was an access failure in the ZigBee communication network, so a reliable communication network was built.

• Journal of Adhesion and Interface
• /
• v.13 no.1
• /
• pp.31-37
• /
• 2012

In this study, we investigated the curing properties of UV-LED curable color coating. Specially, the effects of UV-LED wavelength (365, 395, and 405 nm), inert gas, the concentration of photosensitizer, and dual curing on the curing behavior of UV-LED coating systems were studied. The photopolymerization behaviors and the unreacted acrylate groups at Film-air (FA) interface and Film-substrate (FS) interface were investigated by photo differential scanning calorimetry (Photo-DSC) and Fourier-transform infrared spectroscopy with attenuated total reflection (FT-IR/ATR), respectively. Photo-DSC results showed that the heat flow and the ultimate conversion for coating system cured by 405 nm UV-LED were higher than the corresponding values for coating systems cured by 395 and 365 nm UV-LED. FT-IR/ATR results showed that the UV-LED curing systems improved interior and through curing of the coating film, but significantly are affected by oxygen inhibition at FA-interface. The inert environment such as nitrogen purging and the dual curing improved the surface and interior curing of the coating films.

• Journal of Industrial Technology
• /
• v.31 no.B
• /
• pp.67-73
• /
• 2011

Ceramic metal halide lamps have been widely used due to long lifetime, high luminous efficiency and good colour rendering. In this paper, we developed dimming control system of electronic ballast for 70W ceramic metal halide lamp by using 1-10V interface. The proposed electronic ballast is consists of EMI filter, Full-wave rectifier, Active PFC, DBI(Dual Buck Inverter), Igniter and control circuit.It enables to supply both low-frequency rectangular wave voltage and current to the lamp by using DBI(Dual Bcuk Inverter) structure. By using 1-10V interface, the system that able to dimming the lamp is demonstrated by P-spice simulation and experimental results.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.6
• /
• pp.793-799
• /
• 2016

A multi-purpose sensor interface that provides dual-mode operation of fingerprint sensing and physiological signal detection is presented. The dual-mode sensing capability is achieved by utilizing inter-pixel shielding patterns as capacitive amplifier's input electrodes. A prototype readout circuit including a fingerprint panel for feasibility verification was fabricated in a $0.18{\mu}m$ CMOS process. A single-channel readout circuit was implemented and multiplexed to scan two-dimensional fingerprint pixels, where adaptive calibration capability against pixel-capacitance variations was also implemented. Feasibility of the proposed multi-purpose interface was experimentally verified keeping low-power consumption less than 1.9 mW under a 3.3 V supply.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.10
• /
• pp.1905-1913
• /
• 2006

The researches about the hardware and the software implementing ubiquitous sensor network have great rush in recent years. This paper deals the development of a sensor node with the dual interface which also has an RF wireless interface while has an Bluetooth interface used widely in present. This sensor node includes a Atmeg32 microcontroller, a Bluetooth module, a RF module. a temperature-humidity sensor. and I also develop the F/Ws controlling each modules with C language using GCC compiler. The sensor node developed can reaches 15m with Bluetooth interface and 60m with RF interface. It works stably with the voltage above 5V and it consumes currents 21mA average in idle mode, 63mA average in active mode.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.13 no.4
• /
• pp.281-292
• /
• 2009

The solution of the interface problem or Poisson problem with concave corner has singular perturbation at the interface corners or singular corners. The decoupled dual singular function method (DDSFM) which exploits the singular representations of the solutions was suggested in [3, 9] and estimated optimal accuracy in [10]. The convergence rates consist with theoretical results even for the problems with very strong singularity, with the efficiency depending on parameters used in the methods. Furthermore the errors in $L^2$ and $L^\infty$-spaces display some oscillation, in the cases with meshsize not small enough. In this paper, we present an answer to remove the oscillation via numerical experiments. We observe the effects of parameters in DDSFM, and show the consisting efficiency of the method over the strong singularity.

• Journal of the Optical Society of Korea
• /
• v.13 no.4
• /
• pp.484-488
• /
• 2009

We investigate the characteristics of the surface mode formed at the single interface between dual singly negative medium layers. It is shown that the interface can support a mode which has polarization degeneracy and a vanishing propagation constant. That is, this surface mode is a polarization-independent one that does not propagate at all through the interface. The corresponding electric and magnetic field distributions become static along the longitudinal (guiding) direction (but not along the transverse direction) resulting in the formation of transverse-electric/longitudinalmagnetic or transverse-magnetic/longitudinal-electric modes.

• Proceedings of the IEEK Conference
• /
• 2002.06a
• /
• pp.287-290
• /
• 2002

This paper rotates to tile FPGA that is reffered to as the UTOSPI. The design goal of the FPGA is to convert the UTOPIA-3 bus interface to the SPI-3 bus interface, so that the SAR chips on the ATM interface board can be interfaced to the packet processor through this FPGA. We Propose a new architecture that has two Dual Port RAMs and flow control signals. To buffer data, the UTOSPI has a Dual port RAM in the receive direction and the same size of that in the transmit direction. This design has been implemented, compiled, and tested using a Xilinx Virtex-I XCV-300E FPGA.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.749-752
• /
• 1999

A new interface circuit for variable resistive sensors is proposed. The interface circuit compose of only two strain gages, a voltage-to-current converter, and current mirror with two outputs. A new dual slope A/D converter based on linear operational transconductance amplifier for the testing of prototype interface circuit is also described. The theory of operation is presented and experimental results are used to verify the theoretical predictions. The results show close agreement between predicted behaviour and experimental performance.