• ETRI Journal
• /
• v.41 no.3
• /
• pp.383-395
• /
• 2019

Clock Controlled Dual keeper Domino logic structures (CCDD_1 and CCDD_2) for achieving a high-speed performance with low power consumption and a good noise margin are proposed in this paper. The keeper control circuit comprises an additional PMOS keeper transistor controlled by the clock and foot node voltage. This control mechanism offers abrupt conditional control of the keeper circuit and reduces the contention current, leading to high-speed performance. The keeper transistor arrangement also reduces the loop gain associated with the feedback circuitry. Hence, the circuits offer less delay variability. The design and simulation of various wide fan-in designs using 180 nm CMOS technology validates the proposed CCDD_1 and CCDD_2 designs, offering an increased speed performance of 7.2% and 8.5%, respectively, over a conventional domino logic structure. The noise gain margin analysis proves good robustness of the CCDD structures when compared with a conventional domino logic circuit configuration. A Monte Carlo simulation for 2,000 runs under statistical process variations demonstrates that the proposed CCDD circuits offer a significantly reduced delay variability factor.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.15 no.5
• /
• pp.72-81
• /
• 2011

In order to understand the operation characteristics and major design parameters of a dual combustion ramjet engine, a fundamental analysis model based on gasdynamics and thermodynamic theories was established. The preliminary performance analysis was accomplished and the results clearly describe the intimate relationship between air inlets, gas generator, and supersonic combustor. The methodology presented provides a means for quantitatively determining the geometries of the gas generator and supersonic combustor and assessing the effects on performance of each of the engine components. Also the design results for a basic configuration were provided.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.14 no.6
• /
• pp.17-24
• /
• 2010

This study was performed to make a close inquiry into a pseudo 3-dimensional structure of the liquid-propellant spray emerging from nonimpinging-type injector. Spray configuration near the injector exit was captured by a high-speed camera, and then its periodic phenomena (shedding) was observed. Detailed spatial structure of spray was investigated by spray characteristic parameters (velocity, diameter, volume flux, etc.) with the aid of a Dual-mode Phase Doppler Anemometry (DPDA). Experiment was carried out at various locations along the geometric axis of the nozzle orifice and on the plane normal to the spray stream with the injection pressures of 17.2 to 27.6 bar.

• Journal of Advanced Navigation Technology
• /
• v.17 no.2
• /
• pp.196-201
• /
• 2013

In this paper, a dual-mode balanced filter with symmetric coupled composite right/left-handed transmission line is introduced. Unlike the other symmetric structure, this configuration has the ability to operate under both common- and differential-mode excitation. These properties are achievable through providing physical short circuit by means of ground vias at the center of each unit-cell along the symmetry plane of the structure. Because the CRLH unit-cells are operated under both common- and differential-mode excitation, we implemented a balanced filter using these properties. To validity these features, a five-cell four port coupled CRLH-TL is simulated, fabricated and measured and the obtained performances agree with the simulation results under both common- and differential-mode excitation.

• Journal of Ocean Engineering and Technology
• /
• v.18 no.5
• /
• pp.7-14
• /
• 2004

The interaction of incident manochromatic waves with an array of N surface-piercing porous dual cylindrical structures is investigated in the frame of three-dimensional linear potential theory. The dual cylindrical structure is camposed of concentric two cylinders. The exterior cylinder is porous and the interior cylinder is impermeable. The fluid domain is divided into N+1 regions i.e. a single exterior region and N interior regions. The diffraction potentials in each region representing the scattering of incident waves by an array of porous cylindrical structures are expressed by the Fourier Bessel series. The unknown coefficients in each region are determined by applying the porous boundary condition and continuity of mass flux at the matching boundary. It is found that an array of porous cylindrical structures reduces both the wave forces and the wave run-up, and shows the excellent performance of wave blocking. The results show that various types of breakwater exchanging seawater are prospective by controlling the porosity and the configuration of cylindrical structures.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.4
• /
• pp.343-350
• /
• 2003

Circularly polarized-dual band antenna for GPS(Global Positioning System) and satellite radio system is developed and measured. Both circular polarization and overall antenna dimension reduction are achieved by placing a partially filled high-permittivity substrate under radiating edges. The bandwidth is also improved by choosing an optimal geometric configuration with a partially filled high permittivity substrate. The proposed antenna can be installed on moving vehicles or ships.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.20 no.6
• /
• pp.61-69
• /
• 2016

This study is the results related to the combustion instability phenomenon with respect to combustor length and thermal power as variables in dual swirling combustor configuration. Especially, the beating phenomena having the insensitive resonance frequency of relatively constant peaks are observed when the combustor lengths increase in a lower power regime. This beating phenomenon might be occurred due to the interacting behaviors of pilot and main burners with different periods. Therefore, such insensitive response seems to be a result of the beating phenomenon with interaction between the pilot and main flames even though the combustor lengths are increased.

• Journal of the Optical Society of Korea
• /
• v.17 no.5
• /
• pp.362-370
• /
• 2013

In this paper, we propose a novel optical implementation of a 3DES algorithm based on dual XOR logic operations for a cryptographic system. In the schematic architecture, the optical 3DES system consists of dual XOR logic operations, where XOR logic operation is implemented by using a free-space interconnected optical logic gate method. The main point in the proposed 3DES method is to make a higher secure cryptosystem, which is acquired by encrypting an individual private key separately, and this encrypted private key is used to decrypt the plain text from the cipher text. Schematically, the proposed optical configuration of this cryptosystem can be used for the decryption process as well. The major advantage of this optical method is that vast 2-D data can be processed in parallel very quickly regardless of data size. The proposed scheme can be applied to watermark authentication and can also be applied to the OTP encryption if every different private key is created and used for encryption only once. When a security key has data of $512{\times}256$ pixels in size, our proposed method performs 2,048 DES blocks or 1,024 3DES blocks cipher in this paper. Besides, because the key length is equal to $512{\times}256$ bits, $2^{512{\times}256}$ attempts are required to find the correct key. Numerical simulations show the results to be carried out encryption and decryption successfully with the proposed 3DES algorithm.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.04a
• /
• pp.318-325
• /
• 2011

In order to understand the operation characteristics and major design parameters of a dual combustion ramjet engine, a fundamental analysis model based on gasdynamics and thermodynamic theories was established. The preliminary performance analysis was accomplished and the results clearly describe the intimate relationship between air inlets, gas generator, and supersonic combustor. The methodology presented provides a means for quantitatively determining the geometries of the gas generator and supersonic combustor and assessing the effects on performance of each of the engine components. Also the design results for a basic configuration were provided.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.720-724
• /
• 2004

This paper introduces a new type of driving mechanism for rescue robot that has a variable geometry single-track which satisfies the pre-conditions of rescue robot. This mechanism is a symmetric configuration that has dual directions and prepares against overturn. By using transformation, it can reduce the energy consumption in steering and rotating. And also it maximizes the ability to overcome obstacles, like steps. It is designed to make the size of robot compact and to have the low center of gravity in driving on steps. Finally, we optimized the design variables of components determining the shape of reverse-trapezoid frame to enhance the adaptability to 4 phases of climbing steps.