• Mycobiology
• /
• 제42권1호
• /
• pp.59-65
• /
• 2014

Entomopathogenic fungi are promising pest-control agents but their industrial applicability is limited by their thermosusceptibility. With an aim to increase the thermotolerance of Isaria fumosorosea SFP-198, moisture absorbents were added to dried conidial powder, and the relationship between its water potential and thermotolerance was investigated. Mycotized rice grains were dried at $10^{\circ}C$, $20^{\circ}C$, $30^{\circ}C$, and $40^{\circ}C$ and the drying effect of each temperature for 24, 48, 96, and 140 hr was determined. Drying for 48 hr at $10^{\circ}C$ and $20^{\circ}C$ reduced the moisture content to < 5% without any significant loss of conidial thermotolerance, but drying at $30^{\circ}C$ and $40^{\circ}C$ reduced both moisture content and conidial thermotolerance. To maintain thermotolerance during storage, moisture absorbents, such as calcium chloride, silica gel, magnesium sulfate, white carbon, and sodium sulfate were individually added to previously dried-conidial powder at 10% (w/w). These mixtures was then stored at room temperature for 30 days and subjected to $50^{\circ}C$ for 2 hr. The white carbon mixture had the highest conidial thermotolerance, followed by silica gel, magnesium sulfate, and then the other absorbents. A significant correlation between the water potential and conidial thermotolerance was observed in all conidia-absorbent mixtures tested in this study (r = -0.945). Conidial thermotolerance in wet conditions was evaluated by adding moisturized white carbon (0~20% $H_2O$) to conidia to mimic wet conditions. Notably, the conidia still maintained their thermotolerance under these conditions. Thus, it is evident that conidial thermotolerance can be maintained by drying mycotized rice grains at low temperatures and adding a moisture absorbent, such as white carbon.

• Food Science and Biotechnology
• /
• 제18권4호
• /
• pp.985-990
• /
• 2009

Response surface methodology (RSM) was applied to determine the optimum drying conditions for pork jerky. The physicochemical properties of pork jerky, such as final moisture content, water activity (Aw), pH, and shear force were investigated. In addition, sensory characteristics of pork jerky were evaluated and were used as a parameter for determining the optimum condition. Pork jerky samples were dried at different temperatures between 40 to $80^{\circ}C$ for the time ranged from 0 to 10 hr. The predicted values for moisture content, Aw, and shear force of dried pork samples were in good agreement with the experimental values with correlation coefficients ($R^2$) of 0.95, 0.96, and 0.97, respectively. Both drying temperature and time significantly (p<0.01) affected moisture content, Aw, pH, and shear force and their interactions were also significant at p<0.01 except for Aw. RSM showed the optimum drying conditions for pork jerky, based on moisture content, shear force, and sensory evaluation to be oC$65-70^{\circ}C$ for 7-8 hr.

• Journal of the Korean Wood Science and Technology
• /
• 제48권3호
• /
• pp.345-363
• /
• 2020

본 연구는 배할 및 인사이징 전처리가 횡단면 크기 150 mm 이하 삼나무와 낙엽송 수심재의 고온건조 특성에 미치는 영향을 확인하기 위해 수행되었다. 그 결과, 전처리는 표면할렬과 수축률에 대하여 유의한 차이를 나타내었다. 배할처리는 표면할렬 발생을 줄이기 위한 전처리로서 적합하였으나, 인사이징은 재면의 자상이 서로 연결됨으로써 표면할렬로 전환되는 현상을 야기하기 때문에 전처리로서 적합하지 않았다. 수축률은 전처리 조건에 따라 건조 후 최종함수율이 인사이징, 배할, 배할-인사이징 순으로 감소되는 경향을 나타냄으로써 유의한 결과를 나타내었다. 뒤틀림은 미성숙재의 수축이방성보다 목리각도가 더 크게 영향을 주었으며, 전처리의 영향은 없었다.

• 한국식품과학회지
• /
• 제29권5호
• /
• pp.925-931
• /
• 1997

전갱이의 조미 반건품을 대량으로 생산하기 위한 기초자료를 얻기 위해, 전갱이를 조미 반건조한 후 나일론+폴리에틸렌+선형 저밀도폴리에틸렌$(0.015/0.045/0.04\;{\mu}m)$의 적층필름으로 진공포장하여 빙결점 동결$(-3{\pm}0.5^{\circ}C)$ 저장하면서 저장 중의 품질변화를 비교 검토하였다. 전갱이 조미 반건품을 제조하기 위한 가장 적합한 건조온도 및 시간은 상대습도 $50{\pm}5%$, 풍속 2m/sec 조건에서 각각 $20^{\circ}C$ 및 4시간이었으며 진공포장제품의 저장기한은 42일이었고 비포장제품의 경우는 28일이었다.

• 한국분말재료학회지
• /
• 제29권2호
• /
• pp.118-122
• /
• 2022

The synthesis of porous W by freeze-casting and vacuum drying is investigated. Ball-milled WO₃ powders and tert-butyl alcohol were used as the starting materials. The tert-butyl alcohol slurry is frozen at -25℃ and dried under vacuum at -25 and -10℃. The dried bodies are hydrogen-reduced at 800℃ and sintered at 1000℃. The XRD analysis shows that WO₃ is completely reduced to W without any reaction phases. SEM observations reveal that the struts and pores aligned in the tert-butyl alcohol growth direction, and the change in the powder content and drying temperature affects the pore structure. Furthermore, the struts of the porous body fabricated under vacuum are thinner than those fabricated under atmospheric pressure. This behavior is explained by the growth mechanism of tert-butyl alcohol and rearrangement of the powders during solidification. These results suggest that the pore structure of a porous body can be controlled by the powder content, drying temperature, and pressure.

• 한국식품과학회지
• /
• 제10권4호
• /
• pp.398-403
• /
• 1978

고체입자를 열매체로 유동화시킨 유동층내에서 오징어를 고정시켜 건조시킬 때 유동화입자, grid로 부터의 오징어 고정위치, 온도가 오징어의 건조속도와 품질에 미치는 영향을 검토하였으며 또한 감율건조기간중 수분의 이동 메카니즘을 추론하였다. 1) 유동화입자로는 식염이 가장 바람직했고 풍속 3.8 m/sec에서 최적 유동화상태를 얻었다. 2) 유동층내에서의 균일온도 분포는 grid로 부터 4 cm 이상거리에서 얻었으며 따라서 오징어의 고정위치는 이 거리 이상에서 바람직한 것으로 관찰되었다. 3) 풍속 3.8m/sec, grid로부터 4 cm 이상되는 오징어의 고정위치에서 건조속도에 대한 최적온도는 $35^{\circ}C$에서 얻었으며 이 조건에서 초기수분 80.8%로 부터 최종수분 $18{\sim}22%$까지 건조하는 데 소요되는 시간은 8.5시 간 이었다. 4) 건조자료는 측정된 수분함량범위에서 비정상상태의 확산방정식 $ln{\frac{(W-We}{(Wc-We)}=-m{\theta}$의 경험식에 따랐으며 m의 값은 $0.32hr^{-1}$로 계산되었다. 또 이들 결과는 감율 건조기간중 수분의 이동이 액체확산에 의한 것임을 시사했다. 5) 오징어의 건조는 초기 짧은 시간 동안만 항율건조되고 그 이후는 감율건조에 의해 지배되는 것으로 나타났으며 동일온도에서 동일잔존수분까지 건조시키는 데 소요되는 유동층건조에 대한 통기 열풍건조의 건조시간비율은 1 : 1.4였다. 6) 유동충건조된 오징어 제품은 시판 천일건조 오징어 제품과 비교하여 품질상 유의차가 없었다.

• Journal of the Korean Wood Science and Technology
• /
• 제32권2호
• /
• pp.9-18
• /
• 2004

본 과제는 Spruce재가 사우나와 같은 고온 공간용 부재(部材)로 사용되어질 때 나타나는 수지삼출의 문제점을 해결하여 그 방안을 제시코저 수행하였다. 건식(乾式)공간용 부재(部材)의 경우 적절한 열기건조가 이루어진다면 별도의 처리를 실시하지 않더라도 110℃의 수지삼출 안정선을 얻을 수 있는 것으로 확인되었으며, 고주파진공건조에 의해 수지삼출 안정선이 열기건조보다 약 20℃ 정도 더 상승하였다. 습식(濕式)폭로시험에서는 저압증기폭쇄처리재의 경우 열기건조재나 고주파진공건조재 모두 수지가 전혀 삼출되지 않은 반면에, 무처리재의 경우 건조방법에 관계없이 130℃ 이상의 폭로조건에서는 수지삼출의 정도가 건식(乾式)폭로시험의 경우보다 심한 것으로 나타나, 수지삼출을 예방하기 위하여 인공건조중 저(低)함수율 상태의 건조말기에 고온(高溫)을 적용하여 건조하는 것보다는 건조전 고(高)함수율 상태에서 과열(過熱)증기로 분무(噴霧)처리하는 것이 더 바람직한 것으로 확인되었다.

• Journal of Nutrition and Health
• /
• 제8권4호
• /
• pp.33-37
• /
• 1975

This investigation was designed to determine the influence of drying methods on the free amino acids and free sugars in red pepper and to study the browning mechanism of brown-colored red pepper. Three different drying methods were employed: 1) Sun-drying at $25{\sim}28^{\circ}C$ for 15 days, 2) Drying in oven at $60^{\circ}C$ for 49 hours, and 3) Drying in oven at $90^{\circ}C$ for 8 hours. Dried and ground peels were used for the analysis of free amino acids and free sugars. The results were as follows; 1. Sixteen kinds of amino acids i.e. asparagine, methionine, and cystine etc. were identified. Total amino acid content of the sun-dried sample was not different from that of the fresh sample, but the samples dried at $60^{\circ}C$ and $90^{\circ}C$ in the oven were decreased to 24.9% and 67.4% respectively. Of amino acids identified, methionine, lysine and aspartic acid were decreased in all treatments. Especially, methionine ana aspartic acid were decreased rapidly to 71.8% and 73.3% , respectively. 2. Three kinds of free sugars i.e. glucose, fructose and sucrose were identified. The total content of free sugars was significantly decreased in each treatment. Among the reducing sugars, glucose was rapidly decreased; 65.9% for the glucose of sample dried at $90^{\circ}C$ in the oven. 3. At the higher drying temperature, the darker red color was found. Brown-color appeared at $90^{\circ}C-drying$ showed appreciable losses in carotenoid content, but the major color seems to be due to the large increase in browning compounds. 4. It was assumed that increased browning compounds of red pepper were due to the Maillard reaction which is a nonenzymatic browning process.

• 공업화학
• /
• 제8권1호
• /
• pp.1-7
• /
• 1997

냉동 건조에서 주기적 압력 함수의 이용은 정압에서의 건조 속도보다 더 효과적으로 나타났다. 이러한 공정의 궁극적인 목적은 건조 시간을 감소시킴으로써 에너지 비용을 줄이는데 있다. 이 연구에서 건조 시간을 감소시키기 위해 주기적 압력 함수에 대한 개념을 도입하여 건조 속도에 영향을 미치는 인자들-펄스의 형태, 압력 진폭의 크기, 중간 시간의 길이-에 대한 영향을 고려하였다. 건조 온도는 항상 $20^{\circ}C$로 일정하게 유지하였다. 그리고 펄스의 형태는 일정한 압력의 형태보다 저압에서 고압으로 압력을 변화시키는 주기를 주는 것이 더 유리함을 알 수 있었다. 또한 펄스의 진폭크기는 작을수록 그리고 중간 시간은 길수록 건조 속도가 상당히 증가되었다.

• Journal of Biosystems Engineering
• /
• 제27권3호
• /
• pp.219-226
• /
• 2002

Desorption equilibrium moisture contents of oak mushroom were measured by the static method using salt solutions at flour temperature levels of 35$\^{C}$, 45$\^{C}$, 55$\^{C}$ and 6$\^{C}$ and five relative humidity levels in the range from 11.0% to 90.8%. EMC data were fitted to the modified Henderson, Chung-Pfost, modified Halsey and modified Oswin models using nonlinear regression analysis. Drying tests far oak mushroom were conducted in an experimental dryer equipped with air conditioning unit. The drying test were performed in triplicate at flour air temperatures of 35$\^{C}$, 45$\^{C}$, 55$\^{C}$ and 65$\^{C}$ and three relative humidities of 30%, 50% and 70% respectively. Measured moisture ratio data were fitted to the selected four drying models(Lewis, Page, simplified diffusion and Thompson models) using stepwise multiple regression analysis. The results of comparing root mean square errors for EMC models showed that modified Halsey was the best model, and modified Oswin models could be available far oak mushroom. The results of comparing coefficients of determination and root mean square errors of moisture ratio for four drying models showed that Page model were found to fit adequately to all drying test data with a coefficient of determination of 0.9990 and root mean square error of moisture ratio of 0.00739.