• Journal of the Korean Wood Science and Technology
• /
• 제12권1호
• /
• pp.31-37
• /
• 1984

For the modification of kiln drying schedule, relations between resistance to drying Rd and the moisture content or drying times were found for 4/4, 6/4 and 8/4 green Douglas fir heartwood by the mild drying schedule and the severe drying schedule until the average moisture content was about 10 percent. The results of this study were as follows. 1. Resistance to drying of thicker lumber was higher than that of thinner lumber and resistance to drying of three different thicknesses were negligible between the mild-and the severe drying schedule. The relationships between resistance to drying and two schedules or three thicknesses of lumber were $Rd_1=1.830{\times}10^5\;M^{-2.24}$ for 4/4 lumber by the mild drying schedule, $Rd_2=1.822{\times}10^5\;M^{-2.25}$ for 4/4 lumber by the severe drying schedule, $Rd_3=2.352{\times}10^5\;M^{-2.14}$ for 6/4 lumber by the mild drying schedule, $Rd_4=3.457{\times}10^5\;M^{-2.27}$ for 6/4 lumber by the severe drying schedule, $Rd_5=1.317{\times}10^6\;M^{-2.56}$ for 8/4 lumber by the mild drying schedule, $Rd_6=8.267{\times}10^5\;M^{-2.40}$ for 8/4 lumber by the severe drying schedule. 2. Thinner lumber exhibited lower level of moisture content and shorter drying time required at intersection point between the moisture content and resistance to drying as a function of drying time than those of thicker lumber. Drying time of mild drying was longer than that of severe drying and similar to the level of moisture content at intersection point.

• Journal of the Korean Wood Science and Technology
• /
• 제29권1호
• /
• pp.1-8
• /
• 2001

소나무, 잣나무, 낙엽송과 웨스턴 햄록의 5두께(3, 5, 7, 9 및 11cm) 제재를 3가지 종류의 건조스케줄을 적용한 가열판 압체식 진공건조에서 건조중 함수율, 제재두께와 건조속도의 관계, 제재두께와 건조시간계수의 관계 등을 구명한 결과에서 제재두께 초기함수율 및 건조시간에 따른 건조중 함수율을 추정할 수 있었다. 그리고 함수율 30%에서 15% 범위에서 평균 건조속도는 웨스턴 햄록이 가장 컸고 다음은 소나무, 잣나무, 낙엽송 순위였으며, 제재두께가 증가함에 따라 곡선적으로 감소하였다. 또한 건조시간계수는 제재두께가 증가함에 따라 곡선적으로 증가하였다.

• Journal of the Korean Wood Science and Technology
• /
• 제25권2호
• /
• pp.67-74
• /
• 1997

A relationship between drying resistance and moisture content was found for 24, 27 and 30mm thick boards, and 45, 51 and 57mm thick dimensions of Japanese larch. Dahurian larch and radiata pine in order to modify the kiln schedule by using time schedules. The amount of drying resistance for Dahurian larch lumber was the highest, and radiata pine lumber was the lowest, on the basis of the same moisture content range. Drying resistance increased curvilinearly as moisture content decreased, and was higher for thicker lumber than for thinner lumber, at a given moisture content. Combined drying resistance for the three board thicknesses and the three dimension thicknesses showed a comparatively strong for radiata pine and a Japanese larch, while a weak correlation for Dahurian larch as a function of two independent variables, thickness and moisture content of lumber, respectively.

• Journal of the Korean Wood Science and Technology
• /
• 제47권5호
• /
• pp.557-566
• /
• 2019

Radial and tangential water diffusion in Eucalyptus globulus wood was investigated using three mature trees from a forest in Khemis Sahel (North Morocco). Absorption and desorption kinetics experiments were conducted at ambient temperature ($25^{\circ}C$) and $30^{\circ}C$, respectively, and a relative humidity of 60%. The diffusion coefficients in the two directions were determined under imposed hygrothermal conditions; they were greater in the radial direction for the absorption as well as desorption processes. Convective drying under load, preceded by reconditioning and followed up by balancing, revealed the drying conditions that corresponded to the appropriate drying schedules for E. globulus wood. This was verified by measuring the cracks and bowsbefore and after drying of boards.

• Journal of the Korean Wood Science and Technology
• /
• 제21권2호
• /
• pp.39-48
• /
• 1993

End-matched disks of 7.7cm thickness were part-time dried in vacuum press dryer to investigate the drying characteristics by using drying schedules and end treatments. The ginkgo disks could be dried faster with severer end checks and ring failures by C schedule than by S schedule. There were no significant differences in drying rates and amounts of end checks, ring failures and V-shaped checks occurred between ginkgo disks end-taped with Korean traditional paper (KTP) and those untreated. The drying time of walnut disks was slightly reduced by end-taping with KTP. And the length of end checks and V-shaped checks and the frequency of defected disk were decreased more effectively than those untreated. The tangential strains and tangential drying stresses near bark sides of ginkgo and walnut disk untreated were developed in the early stage of drying and incresed slightly curvi-linearly above fiber saturation point (fsp) and more curvi-linearly below fsp. The influence of end-taping with KTP on the drying rate for impermeable walnut disk was stronger than that for permeable ginkgo disk.

• Journal of the Korean Wood Science and Technology
• /
• 제29권4호
• /
• pp.25-32
• /
• 2001

관행열기건조방식으로는 결함없이 건조가 불가능한 목공예용 단척 통나무를 건조할 수 있는 마이크로파-진공 건조기를 개발하였다. 이 건조기는 크게 출력 1.5 kW와 주파수 2,450 MHz인 마그네트론 3개와 600리터/분 진공펌프, 100 kg 로드셀, 그리고 폭과 높이가 각각 580 mm, 길이가 1,360 mm인 cavity로 구성되어 있다. 목재건조속도는 마그네트론 주사시간과 정지시간의 비율에 따라 결정되도록 되어 있다. 건조기의 성능을 실험하기 위해 직경 12.5~25 cm, 길이 25~50 cm의 리기다소나무, 은사시나무, 그리고 자작나무 통나무를 건조하였다. 건조결과 약간의 건조결함이 있었으나 비교적 양호하였으며 매우 짧은 시간에 건조할 수 있었다. 또 오리나무와 물푸레나무 생재로 된 제기용 선반가공목은 함수율 4%까지 결함없이 건조할 수 있었다. 통나무길이에 따른 마이크로파-진공 건조의 속도도 은사시나무를 이용하여 비교하였다.

• Journal of the Korean Wood Science and Technology
• /
• 제14권1호
• /
• pp.45-54
• /
• 1986

A study was conducted to determine the physical properties related to drying characteristics, the seasonal air drying curves and the kiln drying schedule for taun lumber imported and utilized. This kiln drying schedule was found by oven drying and developed by pilot testing of green lumber and partially air dried lumber. The results of this study were as follows; 1. Average green specific gravity and standard deviation of heartwood lumber were 0.60${\pm}$0.03 and those of sapwood lumber were 0.64${\pm}$0.02. 2. Radial shrinkage from green to air dry and from green to oven dry were 3.05 percent and 5.96 percent respectively, and tangential shrinkage from green to air dry and to oven dry were 5.49 percent and 8.74 percent respectively. 3. Drying time for 25mm thick green lumber (50 percent moisture content) air dried to 30 percent moisture content were 14 days in springtime. 6 days in summertime, and 12 days in autumntime, whereas for 50mm thick lumber in 36 days in springtime, 18 days in summertime, 38 days in autumntime. 4. Kiln drying schedules developed by oven drying were T8-B3 for 25mm thick lumber and T5-B2 for 50mm thick lumber. 5. Kiln drying curves of green 25mm and 50mm thick lumber were similar to those of partially air dried lumber from the level of 30 percent average moisture content. Green 25mm thick lumber (55.7 percent moisture content) was dried to 9.3 percent moisture content in 101.5 hours and green 50mm thick lumber (65.6 percent moisture content) was dried to 11.5 percent moisture content in 526 hours. 6. End checking for green 25mm thick lumber occured in 49.6 percent moisture content and reached maximum amount in 27.6 percent moisture content and closed in 15.8 percent moisture content. 7. End checking for green 50mm thick lumber and partially air dried lumber developed and reached maximum amount earlier then for 25mm thick lumber. 8. Final moisture content of surface layer for 50mm thick lumber was one half of that of core, and moisture content equalized in the lumber after nine days of room conditioning. 9. Casehardening for 50mm thick lumber was slight and was conditioned after nine days of room stroage. 10. Drying defects, such as end checking and surface checking, were not observed and the quality of dry lumber was first.

• Journal of the Korean Wood Science and Technology
• /
• 제19권2호
• /
• pp.65-71
• /
• 1991

본 연구는 CCA 처리재의 재건조(再乾燥)시 적용된 건조 스케쥴 (통상(通常) 열기건조(熱氣乾燥)와 고온건조(高溫乾燥) 스케쥴)이 처리재의 휨강도(强度) 성질에 미치는 영향을 고찰하고자 수행되었다. 탄성계수(彈性係數)(MOE), 그리고 비파괴시험(非破壞試驗)에 의해 얻어진 동적(動的) 탄성계수 (Dynamic MOE) 및 대수감쇠율(對數減衰率)(Logarithmic decrement) 은 처리후 재건조에 의해 큰 영향을 받지 않았다. 반면에 적용된 건조 스케쥴에 관계없이 재건조시 심각한 파괴계수(破壞係數)(MOR)의 감소가 파괴계수 분포의 모든 영역에서 초래되었다. 그러나 통상 열기건조(최대 건구온도=$71^{\circ}C$)와 고온건조(건구온도=$110^{\circ}C$) 서로간에는 감소의 정도에 큰 차이가 없었다. 따라서, 처리재의 재건조사 심각한 파괴계수의 감소가 용인(容認)되지 않는다면 CCA로 처리된 Lodgepole pine 각재의 재건조는 미국 연방 임산물 시험장의 Lodgepole pine의 통상 열기건조 스케쥴 (T9-C3) 보다 온화(溫和)한 조건으로 실시되어야 할 것이다.

• Journal of the Korean Wood Science and Technology
• /
• 제2권2호
• /
• pp.22-24
• /
• 1974

1. 연구의 목적 및 중요성. 우리나라 합판 공업은 우수한 제조 기술을 개발하므로서 합판 수출액은 매년 증가하여 드디어 세계 제1위의 합판수출국으로 등장하게 되었으나, 합판 이외의 각종 목재가공품의 수출은 극히 부진한 실정에 있음은 주로 목재가공기술 부족에 기인하는 것으로 분석되고 있다. 따라서 본 연주에 있어서는 수출용 목재 제품의 품질을 개선하므로서 수출 증대 촉진하기 위하여 목재 가공상 가장 기초적 부문에 속하는 목재 건조법을 규명한 것이다. 2. 연구의 내용 및 범위 습재(wet wood)를 사용하면 가공후 건조 수축하여 변형하고 또는 절삭(切削), 접착 및 도장(塗裝) 등에 있어서 각종의 피해를 유발하므로 이들의 피해를 방지하기 위하여 습재를 사용전에 반드시 건조하여야 한다. 따라서 수출용재로 그 사용량이 많은 감나무, 참나무, 라왕 및 라민등에 대한 건조법 및 그 건조결함을 규명하는 동시에, 우리나라의 목재건조공업 실태도 아울러 조사하였다. 3. 연구 결과 및 활용에 대한 건의 3.1 연구 결과 3.1.1 $100^{\circ}C$ ovendry에 있어시 목구활열형성 및 함수율 5%까지 건조하는데 소요되는 시간은 표 1과 같다. 3.1.2 두께 30mm 공시목을 표 2의 건조스케줄을 적용하여 건조한 결과는 표 3과 같다. 3.1.3 감나무 건조 스케줄은, 건조 특성이 정상인 공시목에 대하여는 표4 스케줄이 적합하고 활열성이 강한 것은 상온 아래 그 관계습도를 85% 이상으로 유지하면서 서서히 기건하여 그 함수율을 25%까지 감소한 후 인공건조하는 것이 안전하다. 3.1.4 각 수종에 대하여 규면된 건조 스케줄은 다음과 같다. 라만 건조 스케줄 표 5 및 표 6 라왕(메란티) 표 7 참나무 표 8. 3.2 활용에 대한 검의 본 연구 결과는 목재가공 관계업체에 널리 보급하여, 목재건조기술 개선 특히 건조결함 방지와 건조 시간 단축에 활용되기를 바란다.