• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2000.11b
• /
• pp.388-395
• /
• 2000

This study was performed to examine the effects of infrared (IR)/heated-air combination drying on some quality attributes of Korean white ginsengs. Ginseng roots were dried in a dryer where both the far infrared ray and heated-air are available as drying energy sources. Diametral shrinkage, external color, total saponin content, and ginsenosides and free sugar composition of the IR/heated-air combination dried ginsengs were measured and compared with those of commercial white ginseng products. The external color became lower in lightness and higher in saturation as the IR radiating plate temperature increased. IR/heated-air combination dried white ginsengs at IR plate temperature of 100$^{\circ}C$ was comparable to the commercial white ginseng products in color characteristics. Diametral shrinkage ratios ranged from 20 to 36% and appeared to be independent on the different drying methods. No definite evidence could be found whether the IR/heated-air combination drying and the conventional. hot-air drying practice resulted in white ginsengs having different ginsenoside contents and compositions. No conclusion could be made on whether the various drying treatments used in the study had effects on the free sugar contents and compositions of white ginsengs.

• Journal of Biosystems Engineering
• /
• v.3 no.1
• /
• pp.64-76
• /
• 1978

A dimensional supply of petroleum fuels and increased competition for petroleum products has made the conservation of energy in grain drying an important cost and management factor. Research on solar grain drying is directed toward utilization of a renewable energy source as an alternative to petroleum fuels for drying. There are many technical and economic problems in accepting and adopting solor energy as a new energy source for grain drying. The purpose of this study are to assess the state of the art of solar grain drying and to find out the problems by reviewing literatures available. The results obtained may be summarized as follows; 1.It may be considered that the weather conditions in October of Korea was satisfactory for the forced natural air and solar heated air drying. 2. Solar energy is considered more applicable to low-temperature, In-storage drying systems than to high-temperature, high-speed drying systems. In-storage drying systems require low levels of heat input. The costs of collector systems to provide low temperature are considerably cheaper than for high-temperature systems. 3. Tubular type collector made of polyvinyle film seems to be the most practical at this stage of development and black-painted bare-plate collectors mounted on the outside of a typical, round, low-temperature drying bin can supply an appreciable amount of the energy efficiently needed for low-temperature grain drying at a lower cost. 4. All of the grains in solar drying tests was successfully dried up to safe storaged moisture levels without significant spoilage. Drying rates with solar system were faster than natural air drying systems, and usually a little slower than similar low-temperature electric drying systems. 5. Final grain moisture levels were lower in solar tests than in natural air tests, and generally higher than in tests with continuous heated air. 6. Savings of energy by use of solar collectors ranged from 23% to 55%, compared to the natural and electric ileated air drying systems. However, total drying cost effectiteness tvas not significant. Therefore, it is desirable that solar grain dry-ing sIFstems tvhich could be suitable for multiple heating purposes on farms shouldbe developed. 7. Supplemental heat with solar radiation did little to reduce air flow requirementsbut refuced drying time and increased the p\ulcornerobability of successful drying duringdrying poriod.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.28 no.5
• /
• pp.208-215
• /
• 2016

This study was conducted to improve the performance of low-temperature vacuum dryer by applying desiccant to cold trap. Performance evaluation was carried out using several desiccants. The amounts of absorption and diffusivity were measured based on analytic model. Results of desiccant performance evaluation revealed that silica-gel had the most excellent performance for conditions of low-temperature vacuum drying process. Silica-gel was applied to cold trap for evaluating the drying performance. The experiment results showed that the drying time was extended as the thickness of sample was increased due to increased heat and mass transfer resistance of drying sample. In addition, as heating plate temperature was increased, drying time was decreased due to increased evaporation pressure of drying sample. Furthermore, drying time with desiccant was decreased approximately 20% than that without desiccant.

• Journal of the Korean Society of Food Culture
• /
• v.10 no.2
• /
• pp.83-88
• /
• 1995

This study was conducted to examine the effects of additives and drying methods in Yukwa's manufacture. Additives had significant effects on hardness, and bean water and bean powder added group rated better than the baking powder and boiled bean added group. Sensory evaluation test showed that bean water and bean powder added group produced higher desirability. Drying methods had significant effects on all attribute of sensory evaluation, natural drying and incubative plate drying produced higher uniformity, denseness and overall desirability.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.27 no.12
• /
• pp.645-651
• /
• 2015

This paper presents an experimental study on the freeze drying process for poly ${\gamma}$ glutamic acid. The physical properties of poly ${\gamma}$ glutamic acid are measured during the freeze-drying process. The moisture contents of poly ${\gamma}$ glutamic acid according to the glass transient temperature are obtained by DSC (Differential Scanning Calorimetry) analysis. The end point of primary drying for the poly ${\gamma}$ glutamic acid with a thickness of 3 mm is obtained by measuring the thickness of the dried layer, the amount of moisture evaporation, the moisture content, and the pressure in the drying vacuum chamber during the freeze-drying process. By considering the variation in the glass transient temperature with respect to the moisture content of the material, a control schedule for the heating plate temperature is suggested during the secondary drying process.

• Korean Journal of Food Science and Technology
• /
• v.25 no.4
• /
• pp.313-320
• /
• 1993

A sublimation model of the freeze drying process, which accounted for the removal of free water, was presented and used to study the operation conditions of freeze driers for carrot juice. It was found that the shortest drying time was obtained when the condenser temperature and chamber pressure were kept at heir lowest values and the plate temperature was controlled independently so that the scorch and melting constraints were both held throughout the drying period. The effect of sample thickness on the drying time was significant. Optimal policies were investigated experimentally in laboratory freeze dryer.

• Journal of Biosystems Engineering
• /
• v.13 no.4
• /
• pp.38-45
• /
• 1988

The freeze drying of garlic juice was carried out in a vacuum freeze dryer, laboratory size, by backface heating. The factors which influence the rate of freeze drying, the pressure of drying chamber, the plate temperature, the concentration and the thickness of a sample, were discussed in this study. The drying rate was in proportion to the drying chamber pressure and when the pressure was at 1.5 torr, the foaming occured on the surface of materials, so this condition was not suitable for freeze drying. As the temperature of plate increased, drying rate increased, but when the temperature was $20^{\circ}C$, it was impossible to accomplish freeze drying because the foaming and the dispersion occured in a sample. The higher the concentration of a sample was, the lower drying rate was.

• Journal of Sensor Science and Technology
• /
• v.9 no.3
• /
• pp.233-241
• /
• 2000

This paper presents comparative results of various commonly used anti-stiction methods for polysilicon surface micromachining using identical test structures. Four different types of cantilevers - single cantilevers, cantilevers with dimples, cantilevers with anti-stiction tip, cantilevers with plate - with different widths and lengths were employed as test structures. The detachment length of cantilevers was examined depending on the anti-stiction methods and test structure types. After sacrificial layer was removed, evaporation and sublimation drying methods were used in the drying step when takes place the stiction between structure and substrate. Various final rinsing liquids such as methanol, IPA, and DI water were employed to compare anti-stiction results depending on surface tension and rinsing temperature. For sublimation drying method, methanol was used as an intermediate rinsing liquid. Also, the influence of a stress gradient of the polysilicon was investigated by performing the identical anti-stiction experiments on identical test structures with a stress gradient. In conclusion, sublimation drying method showed superior results to various evaporation drying methods and hence it is considered the best method for releasing polysilicon microstructure in polysilicon surface micromachining.

• Journal of Biosystems Engineering
• /
• v.25 no.2
• /
• pp.115-122
• /
• 2000

This study was performed to develop a prototype continuous flow ginseng dryer with which better product quality and lower drying energy consumption could be achieved compared with conventional ginseng dryers. A dryer having both far infrared ray (IR) and heated-air as the drying energy sources was designed and fabricated . Dryer performance was studied by examining energy efficiencies and dryer performance evaluation indices (DPEI) during the drying tests of medium-sized four year ginseng roots with IR radiating plate temperature and drying air temperature in the range of 80-12$0^{\circ}C$ and 22-5$0^{\circ}C$, respectively. The DPEI of IR /heated -air combined drying was 1/3 of that of the conventional heated-air drying when ginseng were dried to the same final moisture ratio. When ginsengs were dried for 12 hours in the prototype IR/heated-air combination dryer, a linear relationship was found to exist between final moisture ratio and ginseng temperature. As the drying progressed, drying air temperature inside the dryer was nearly constant but ginseng temperature was drastically increased during the first two hours and gradually increased thereafter until the end of drying. With the prototype Ir/heated-air combination dryer, the drying rate changed little but the energy efficiency increased proportionally when the amount of ginseng to be dried increased. Drying capacity, energy efficiency, and DPEI of the prototype IR/heated-air combination ginseng dryer were estimated to 1.500 roots, 65% and 3.800kJ/kg-water , respectively.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.1931-1936
• /
• 2007

The application of high velocity air jets to heat transfer surface has tremendous engineering potential in various industries. The impinging jets are therefore widely used for their enhanced transport characteristics, especially for drying of continuous materials such as sheet, film, carpets, forming materials and pallets. This paper presents the drying characteristics of plate type material and performs the test with the change of operating conditions in conveyer band dryer using the impinging jet nozzles. The factors influencing drying rate were confirmed, also the design data of band dryer using the impinging jet was obtained.