• Transactions on Electrical and Electronic Materials
• /
• v.13 no.6
• /
• pp.273-277
• /
• 2012

The vacuum drying process for drying of paper in current transformers was modeled with an aim to develop an understanding of the drying mechanism involved and also to predict the water collection rates. A molecular as well as macroscopic approach was adopted for the prediction of drying rate. Ficks law of diffusion was adopted for the prediction of drying rates at macroscopic levels. A steady state and dynamic mass transfer simulation was performed. The bulk diffusion coefficient was calculated using weight loss experiments. The accuracy of the solution was a strong function of the relation developed to determine the equilibrium moisture content. The actually observed diffusion constant was also important to predict the plant water removal rate. Thermo gravimetric studies helped in calculating the diffusion constant. In addition, simulation studies revealed the formation of perpetual moisture traps (loops) inside the CT. These loops can only be broken by changing the temperature or pressure of the system. The change in temperature or pressure changes the kinetic or potential energy of the effusing vapor resulting in breaking of the loop. The cycle was developed based on this mechanism. Additionally, simulation studies also revealed that the actual mechanism of moisture diffusion in CT's is by surface jumps initiated by surface diffusion balanced against the surrounding pressure. Every subsequent step in the cycle was to break such loops. The effect of change in drying time on the electrical properties of the insulation was also assessed. The measurement of capacitance at the rated voltage and one third of the rated voltage demonstrated that the capacitance change is within the acceptance limit. Hence, the new cycle does not affect the electrical performance of the CT.

• Journal of Environmental Health Sciences
• /
• v.46 no.4
• /
• pp.398-409
• /
• 2020

Objectives: This study aimed to evaluate environmental exposure to tobacco-specific nitrosamines (TSNAs) by conducting an analysis of the concentration of TSNAs in deposited dust collected from a fertilizer plant and the surrounding village, a simulation of high-temperature drying of tobacco waste, and CALPUFF modeling. Methods: The raw materials of the products, deposited dust (inside and outside the plant and residential area), soil, and wastewater were sampled and the TSNA concentrations were analyzed by LC-MS/MS. As the plant was closed down before the investigation, simulation tests were conducted to confirm the substances discharged during high-temperature (300℃) drying of tobacco waste. CALPUFF modeling was performed to identify the area of influence due to exposure to TSNAs. Results: TSNAs were detected in organic fertilizers estimated to contain tobacco waste, deposited dust, and soil collected from inside and outside the plant. N'-nitrosonornicotine (NNN), 4-(methylnitrosoamino)-1-(3-pyridyl)-1-butanone (NNK), and N'-nitrosoanatabine (NAT) components were detected in five of 15 deposited dust samples collected from the residential area around the plant, while TSNAs were not detected in the five sampling points in the control area. Also, the simulation test for the high temperature drying of tobacco waste found emissions of TSNAs. The CALPUFF modeling results showed that the survey area was likely to be included in the area of influence of TSNA emissions from the plant. Conclusions: It is estimated that harmful tobacco ingredients such as TSNAs were dispersed in nearby areas due to the illegal use of tobacco waste as a raw material to produce organic fertilizers at the plant. These findings assume that the residents have been exposed to TSNAs and suggest that the need for the establishment of measures to manage environmental health.

• Journal of Industrial Technology
• /
• v.3
• /
• pp.75-85
• /
• 1983

This study is conducted to provide useful fertilizer or soil conditioner of sludge from nightsoil treatment plant. Several possibilities present themselves. The major sink for disposal of waste sludge is the land, and in this case values will be measured primarily in terms of agricultural benefits. According to the result of sludge drying experiment, the drying rate with mixing once a day was more increased by three times than the state without mixing. And in sludge, N was 7-9%, P was 0.85-4.14%, and coliform groups in dried sludge were 75 MPN/gr.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1996.06c
• /
• pp.886-895
• /
• 1996

To fit the desorption isotherm and adsorption isotherm for Pangola grass, the modified Henderson model, Chung-Pfost model, modified Halsey model, and modified Oswin model were used to fit the experimental EMC /ERH data. A step-by -step ERH measuring technique was used in this study. The ERH data were collected at three temperature levels of 5 $^{\circ}C$, $25^{\circ}C$ and 5$0^{\circ}C$ for Pangola grass whole plant, stem , and foliage. The modified Halsey model has the best fit for both desorption isotherm and adsorption isotherm of Pangola grass whole plant as compared with other models.

• Korean Journal of Plant Resources
• /
• v.35 no.4
• /
• pp.428-434
• /
• 2022

Glycyrrhizae Radix is an herbal medicine vulnerable to fungi. So there are regulations on mycotoxins. Therefore, in this study, the affect of various drying methods and additional gamma irradiation (10 kGy) was studied to suppress the microbial generation of Glycyrrhizae Radix. As a result of detecting and comparing microorganisms using the dry film method for samples prepared by each of natural, hot air, freezing, microwave drying and gamma irradiation, the affect of reducing microorganisms by microwave drying and gamma irradiation was confirmed. There was no statistically significant change in the content of the active compounds between the treatment groups.

• Journal of Biosystems Engineering
• /
• v.11 no.2
• /
• pp.66-75
• /
• 1986

In order to improve the traditional post harvest system in Korea, a model for mechanized grain drying and storage facilities was developed. Also, a computer program for the model system was developed. For the study, flat type steel bin and circulation type dryer were selected for the model and Fortran language was used for the computer program. This program was tested by using various practical data. The following results were obtained from the study: 1. The general model developed can be used for designing a rough rice drying and storage facility within the range from 100 ton to 1000 ton capacity. 2. Major output of the computer program for designing a model system were as follow; a. The dimension of the plant. b. The storage bin size, dryer number and dryer size. c. The dimension of individual equipment and its required HP. d. Capital requirement and operating cost of the model system.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.35 no.4
• /
• pp.57-67
• /
• 2003

The purpose of the present study is to identify the drying cylinder model in paper plants and to analyze characteristics of process responses for changes in input variables. The model developed in this work is based on actual plant operation data and the steam pressure applied to the cylinder behaves as one the main variables. It is found that heat transfer coefficients from the condensate to the canvas could be represented as empirical relations based on heat conductivities and operation date. The effectiveness of the cylinder model is demonstrated by the measured moisture contents and web temperature. Using transfer functions derived from the cylinder model stability of the drying process is analyzed.

• Current Research on Agriculture and Life Sciences
• /
• v.32 no.1
• /
• pp.10-17
• /
• 2014

This study presents an eco-friendly persimmon drying system to satisfy consumer preferences and provide a popular food for both the domestic and international markets. The most effective antimicrobial compounds were developed from a combination of plant extracts (18.18% clove buds, 9.90% cinnamon, 9.09% licorice, 4.55% cnidium, 4.55% seed of grapefruit, and 54.54% apple vinegar). The dried persimmons were evaluated as regards their moisture and sugar content, weight, hardness, and color value. During the drying process, the overall moisture content of the persimmons increased, along with the sugar content. The hardness was almost the same for each region and decreased on an average of 0.5~0.86 after 6 weeks. As regards the chromaticity, ${\Delta}E$ decreased during the drying process, while L-value became darker and a-value showed a dark red color over time.

• Korean Journal of Medicinal Crop Science
• /
• v.6 no.1
• /
• pp.38-43
• /
• 1998

This experiment was carried out to gather basic information for improvement of peeling methods in peony (Paeonia lactiflora) roots which have been used for medicinal resources in Korea. Drying time required was shortened in thin root. Optimum drying time after machine peeling appeared to be 20 hrs in 5 to 10mm of root diameter, 39 hrs in 10 to 15mm, 48 hrs in 15 to 20mm, 56 hrs in more than 20mm, but those of unpeeled roots took 11 hrs in 5mm of root diameter and 4 hrs in exposed parent material. Paeoniflorin content in dried roots after peeling was lower than that of unpeeled root. Paeoniflorin content in root below 5mm in diameter was highest (6.15 %) and that was decreased in the increased root diameter up to 20mm, but it was slightly increased in root greater than 20mm in diameter.

• Plant Biotechnology Reports
• /
• v.2 no.4
• /
• pp.259-265
• /
• 2008

Picea koraiensis, called Korean spruce, is an evergreen tree and found mostly in northeast Asia. In this study, plant regeneration via somatic embryogenesis from open-pollinated immature zygotic embryos of nine geno-types of elite trees was established. Immature zygotic embryos were cultured onto RJW medium modified from 505 medium with $21.48{\mu}M$ NAA, $2.22{\mu}M$ BA, and $2.32{\mu}M$ KT. The average frequency for all nine genotypes was 74.2%. Embryogenic calluses of the nine genotypes of elite trees were subcultured on RJW basal medium containing $8.06{\mu}M$ NAA, $1.11{\mu}M$ BA, and $1.16{\mu}M$ kinetin. The calluses of three lines, $3^{\sharp}$, $9^{\sharp}$, and $2^{\sharp}$, were actively proliferated but others were not. Somatic embryogenesis was induced from the embryogenic callus in genotypes of $3^{\sharp}$, $9^{\sharp}$, and $2^{\sharp}$ on RJW medium with ABA and $60g\;l^{-1}$ sucrose. Cotyledonary somatic embryos were subjected to a drying process. The drying of embryos by uncapping the culture bottle for 5 days on a clean bench resulted in a high frequency of germination of somatic embryos (87% in RJW medium). However, plantlet conversion from germinated embryos was greatly reduced and the optimal medium for plant conversion was 1/2 WPM or 1/2 BMI medium. In conclusion, we have, for the first time, established a plant regeneration system via somatic embryogenesis in the Korean spruce, which can be applied for rapid micropropagation of elite trees.