• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1993년도 Proceedings of International Conference for Agricultural Machinery and Process Engineering
• /
• pp.952-965
• /
• 1993

A simulation modeling is necessary for the optimal design of a rice processing plant, which consists of a facility (a silo system) of rice drying and storage and a rice mill plant. In a rice processing plant, the production scheduling and the decision on capcity of each unit based on a queuing theory is very important and difficult. In this study a process-oriented simulation model was developed for the design of a rice drying and storage system with SLAMSYSTEM. The simulation model is capable of simulating virtually all the processing activities and provides work schedules which minimize total processing time , mean flow time and bottleneck of the plant system and estimate drying time for a batch in a drying silo. Model results were used for determination the size and capacity of each processing unit and for analyzing the performance of the plant . The developed model was actually applied to construct a grain silo system for rice drying and storage.

• Applied Microscopy
• /
• 제50권
• /
• pp.15.1-15.6
• /
• 2020

Sample preparation including dehydration and drying of samples is the most intricate part of scanning electron microscopy. Most current sample preparation protocols use critical-point drying with liquid carbon dioxide. Very few studies have reported samples that were dried using chemical reagents. In this study, we used hexamethyldisilazane, a chemical drying reagent, to prepare plant samples. As glandular trichomes are among the most fragile and sensitive surface structures found on plants, we used Millingtonia hortensis leaf samples as our study materials because they contain abundant glandular trichomes. The results obtained using this new method are identical to those produced via critical-point drying.

• 동력기계공학회지
• /
• 제15권4호
• /
• pp.5-10
• /
• 2011

In case of using rapid vacuum-freeze drying for high quality dry flower of flowering plant, the morphological and physiological characteristics of dry rose showed as the following. The dry ratio of about 82% presented after 1 day in case of using rapid vacuum-freeze drying and it was reached that the optimum storage water content of general dry products was 18%. The dry ratio of about 89% presented after 4 days. This result indicates very short dry time comparing with natural dry time of 12 days. Also, the morphological characteristics of flowering plant in case of vacuum-freeze drying showed similar shape with real flower. The contraction decreased about 9% comparing with real flower under dry time of 72 hours. But the contraction in case of natural dry decreased 36% and showed noticeable difference. The brightness which affects physiological characteristics of dry flowering plant showed lower values according to the dry process and chromaticity was thick. After 4 days, natural dry was thick with about 2 times comparing with vacuum-freeze drying. In case of vacuum-freeze drying, the quantity of anthocyanin and chlorophyl which affect discoloration and bleaching of dry flowering plant showed the clear difference comparing with natural dry method due to the sublimation by vacuum after rapid freeze with short initial time.

• 플랜트 저널
• /
• 제5권4호
• /
• pp.73-79
• /
• 2009

Increase of consumption in limited coal reserves leads prices surging. As a result, iron works which produce products with coal are in difficulties. Accordingly, it is required a lot of research of using non-caking coal that is relatively low cost and has abundant reserves. Direct drying and indirect drying are two major methods of drying the coal. Recently, to minimize the needed calories and to save energy, using fluidbed or fluidizing method is a recent main trend of minimizing the size of the facility and maximizing energy efficiency. However there is also disadvantage such as increasing facility investment because of installing additional facilities in the latter part. In this study, we will have theoretical researches on the indirect drying method with heat exchange system which have been traditionally used. As a result it is expected to increase the efficiency of the facility operation.

• 한국기계가공학회지
• /
• 제8권4호
• /
• pp.61-68
• /
• 2009

This paper presents the numerical analysis of process of sludge drying to know the characteristics of design parameters and develop the new process plant. Finite volume method and $k-{\varepsilon}$ turbulence model were used to analogy the sludge drying furnace. It has been attempted to perform the disposal of sewage sludge such as simple reclaiming and dumping in sea and incineration. Currently, these methods are restricted by national or international government regulations. The drying process is adopted as an effective method for sewage sludge treatment. However sewage sludge makes it difficult to treat with a large volume at the real drying process plant because of its own complicated physical, chemical, and thermal properties. The final design value of moisture content with 10% of the dried sludge can be obtained through the simulated outputs in this study.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.1326-1331
• /
• 2009

Drying process in the cylindrical thin film layer of sludge with the thickness less than a few millimeters has been investigated. Thin film drying is specially designed and used to dry the viscous materials like sewage sludge. The thin film layer of sludge is dried on the metallic cylindrical surface through which thermal energy is supplied to the layer during drying. The wall temperature is assumed to be constant during drying in the present study for the simplification. In order to solve the equations, the mass transfer rate on the drying surface should be determined. The mass flux of evaporated water vapor on the surface is estimated with the formulation given in the literature. The effect of some physical parameters on drying has been examined to figure out the drying characteristics of the sludge layer.

• 농약과학회지
• /
• 제12권4호
• /
• pp.368-374
• /
• 2008

길항력이 있는 그람음성균들의 생물적 방제제로 성공적인 개발은 균의 건조와 저장시의 낮은 생존을 때문에 건조제형으로 만드는 것은 제한되어있다. 그람음성균의 배양시 높은 염(NaCl)의 첨가는 삼투압 조절제인 osmolyte의 생성을 유도하여 건조 시 생존율을 높인다고 알려져 있다. 그람음성의 길항력을 내는 비병원성 Erwinia carotovora subsp. carotovora(Ecc) 9-3의 건조와 저장시의 염의 영향에 관해 연구하였다. Ecc 9-3의 생장률은 0.5 M의 염이 첨가되어 있는 배지에서 큰 차이가 없었지만 0.7 M의 염이 첨가된 배지에서는 급격하게 낮아진 것을 확인하였다. 건조와 저장시의 생존율은 0.5 M의 염을 넣은 배지가 염을 넣지 않은 배지보다 상온건조와 동결건조에서 각각 2배 그리고 3배의 높은 생존율을 얻었다. 건조 후 저장에서도 역시 염이 높을수록 Ecc 9-3의 생존율이 더 높았다. 그리고 상온건조와 동결건조 모두 $4^{\circ}C$에 저장하였을 때 생존율에 큰 차이가 없었다. 그러나 생존율은 $27^{\circ}C$, $37^{\circ}C$에 저장하였을 때 염의 농도가 높을수록 생존율이 증가하였다. 첨가제 실험에서는 lactose가 동결건조와 상온건조 모두에 영향을 주었고 dextrin은 상온건조에 큰 영향을 주었다.

• 상하수도학회지
• /
• 제38권3호
• /
• pp.155-164
• /
• 2024

There are two primary sludge drying methods such as the direct heating microwave method and the indirect heating steam one. In this study, the drying treatment facility at sewage treatment plant A applied both of these drying methods. The research aimed to investigate the optimal operation approach for the drying facility, considering the input sludge and the moisture content data after the drying process. Moisture content and removal rate data were executed at the research facility from January 2016 to December 2018. First, the microwave, a direct heating drying method, performed intensive drying only on the outer surface of the sludge by directly applying heat to the sludge using far infrared rays, so effective sludge drying was not achieved. On the other hand, the steam method of the indirect heating method used steam from a gas boiler to maximize the utilization of the heat transfer area and reduce energy of the dryer, resulting in an effective sludge drying efficiency. The sludge moisture content brought into the sludge drying facility was about 80%, but the moisture content of the sludge that went through the drying facility was less than 10% of the design standard. Therefore, the steam method of the indirect heating method is more effective than the microwave method of the previous direct heating method and is more effective for maintenance It has proven that it is an efficient method of operating construction facilities.

• 한국식품영양학회지
• /
• 제36권4호
• /
• pp.327-333
• /
• 2023

This study investigated the antioxidant characteristics of sweet potato according to different plant parts and drying methods. The sweet potato plant parts were divided into root tubers, stems, stalks, leaves, and tips, and the drying methods were freeze-drying and hot air drying. Total polyphenol and flavonoid contents and radical scavenging activity of the sweet potato plant parts were significantly different depending on the plant parts and drying methods. The total polyphenol content of freeze-dried sweet potato leaves and tips were 52.76 and 46.19 mg chlorogenic acid equivalents/g sample, and the total flavonoid contents were 222.47 and 214.12 mg quercetin equivalents/g sample, respectively, and decreased with hot air drying. DPPH radical scavenging activity was higher in freeze-drying than hot air drying and was significantly different depending on the plant parts. The ABTS radical scavenging activity of freeze-dried sweet potato leaves and tips were 43.48 and 44.68 mg Trolox equivalents/g sample, respectively, and decreased with hot air drying. Therefore, additional studies on the functionality of using by-products from sweet potato cultivation are needed.

• 펄프종이기술
• /
• 제35권5호
• /
• pp.53-61
• /
• 2003

In this study a model for the drying process in paper production plants was developed based on the mass and heat balances around drying cycles. Relationships for the heat transfer coefficients between the web and the air as well as between the drying cylinder and the web were extracted from the closed-loop plant operation data. It was found that the heat transfer coefficients could be represented effectively in terms of moisture content, basis weight and reel velocity. The effectiveness of the proposed model was illustrated through numerical simulations. From the comparison with the operation data, the proposed model represents the paper plant being considered with sufficient accuracy.